IKORNNES Standing Mirror Assembly Instructions
Brand: IKEA
Product Name: IKORNNES
Dimensions: 52x167 cm
Parts Included
- 2x Part 100644 (Screw)
- 4x Part 109538 (Screw)
- 2x Part 130738 (Threaded Rod)
- 2x Part 155291 (Connector)
- 4x Part 116823 (Washer)
- 2x Part 100828 (Nut)
Assembly Guide
Step 1
Connect two Part 155291 with two Part 130738 and a ring. Ensure correct alignment.
Step 2
Assemble two Part 116823 with two Part 100828 to create base components.
Step 3
Attach the main mirror frame. Align and insert the frame into the designated slots. Avoid misaligned insertion (❌).
Step 4
Secure the mirror frame to the base supports using two Part 116823 (washers), two Part 100828 (nuts), and two Part 100644 (screws).
Step 5
Fold out the support legs. Follow the directional arrow ▶️ to extend the legs.
Step 6
Attach the main mirror frame to the extended support legs using four Part 109538 screws. Insert and tighten.
Step 7
Secure the mirror frame to the support legs with the remaining four Part 109538 screws. Ensure all connections are firm.
Important Note: If unsure about any step, seek assistance from IKEA.