SONNEMAN 7535 Sconce Assembly Instructions

Brand: SONNEMAN

Model: 7535 Sconce

Product Information and Warnings

IMPORTANT

Always disconnect the power before installing or replacing Luminaires and before cleaning or other maintenance.
Consult a qualified, licensed electrician to ensure correct branch circuit conductor.
Please read all included assembly instructions and warnings carefully before installation. Contact Customer Service if you have any questions or concerns. Before installation, please confirm that the fixture is compatible with your supply voltage and dimming system, if present.
LEDs are highly sensitive electronic devices, and must be treated with care. Do not open any factory sealed compartments, and avoid touching the LEDs with your hands or any object.
Although all our fixtures are equipped with protective devices, LED electronic systems are vulnerable to power surges and supply variations. Do not install LED fixtures on the same circuit as any motors, appliances, or HVAC systems.
Do not remove or bypass any LED Driver or Transformer that is provided with the fixture, and do not replace or substitute with another power supply.
Fixtures must be wired in parallel on independent leads; do not "daisy chain" multiple fixtures together or wire them in series.
All factory-made splices and connections must remain intact. LED circuits are carefully designed and built, and improper connections may damage the fixture.
Any mounting hardware is provided for your convenience and should be used with discretion. Always use the appropriate hardware for the mounting surface.

Assembly Instructions

Steps

Shut off power to the outlet box (A) or branch circuit.
Make appropriate connections using wire nuts:
- Connect the LED driver's (B) live wire to the live outlet box wire.
- Connect the LED driver's neutral wire to the neutral outlet box wire.
- Connect the fixture's ground wire (green or uncoated) to the ground supply wire. If no ground wire is present in the outlet box, connect ground wire to the mounting plate (C) using the green screw (included).
- Carefully place all connections in outlet box.
Attach the mounting plate (C) to outlet box (A), secure with outlet box screws (E).
Place fixture (D) over the mounting plate (C) and secure into place using set screws (F).
Restore power to the outlet box (A).

Diagram Description

The diagram illustrates the assembly process. Key components are labeled:

(A): Outlet box or branch circuit box.
(B): LED driver, with wires for live, neutral, and ground.
(C): Mounting plate, which attaches to the outlet box.
(D): The main fixture body.
(E): Outlet box screws used to secure the mounting plate.
(F): Set screws used to secure the fixture to the mounting plate.

Wires are shown connecting from the outlet box to the LED driver (B), and then from the LED driver to the fixture (D) via the mounting plate (C).

Notes

This fixture is dimmable with Electronic Low Voltage (Trailing-Edge), Incandescent (Leading-Edge), and 0-10V type dimmers only.

Multiple U.S. and foreign patents pending.

Care Instructions

Use a clean, dry cloth when dusting. To protect the finish, avoid any harsh abrasives or chemicals.

	Sonneman Urban Edge Flush Mounted Sconce (Model 4945.97) - Specifications Detailed specifications for the Sonneman Urban Edge Flush Mounted Sconce, model 4945.97. This document outlines dimensions, electrical requirements, installation guidelines, shipping details, general listings, shade material, and available finishes.
	Sonneman Urban Edge Flush Mounted Sconce Assembly Instructions Detailed assembly and installation instructions for the Sonneman Urban Edge Flush Mounted Sconce, including care guidelines.
	A Way of Light Limited Warranty Details the limited warranty terms for A Way of Light LED and non-LED fixtures, including coverage, exclusions, and buyer responsibilities.
	Sonneman Luna Round LED Pendant Assembly Instructions Detailed assembly instructions and important safety warnings for the Sonneman Luna Round LED Pendant series (models 2233, 2234, 2235), covering installation, wiring, and care.
	SONNEMAN Limited Warranty - LED and Non-LED Lighting Fixtures Detailed limited warranty information for SONNEMAN A Way of Light LED and Non-LED fixtures, including coverage, exclusions, and claim procedures. Updated January 1, 2024.
	SONNEMAN Labyrinth 2099 Intersections Pendant Assembly Instructions Detailed assembly instructions for the SONNEMAN Labyrinth 2099 Intersections Pendant light fixture, including product information, parts list, step-by-step installation guides, and care instructions.
	SONNEMAN Shells 3546, 3548 LED Pendant Assembly Instructions Detailed assembly instructions, product information, and warnings for SONNEMAN Shells 3546 and 3548 LED Pendant lights. Includes a guide for coax splicing and care instructions.
	SONNEMAN Limited Warranty for Lighting Fixtures SONNEMAN's limited warranty policy for LED and Non-LED lighting fixtures, detailing coverage, exclusions, remedies, and specific terms for Inside+Out Products.