Assembly Instructions
Important: Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.
This light should be installed by a licensed electrician.
Lamp Installation and Assembly
- Shut off power to the outlet box. (Refer to Fig. A)
- Attach the mounting plate to the outlet box, secure with outlet box screws. Use anchors and wood screws for extra support (included).
- Make appropriate electrical connections using wire nuts:
- Connect the fixture's live wire (black) to the live outlet box wire.
- Connect the fixture's neutral wire (white) to the neutral outlet box wire.
- Connect fixture's ground wire (green or uncoated) to the ground outlet box wire. If no ground is present in outlet box, connect fixture's ground wire to the mounting plate using the green screw (included).
- Carefully place connections in outlet box.
- Attach the back plate to the mounting plate, secure with mounting screws.
- Install 60W medium base T-type bulb. (not included)
- Screw the mesh shade to threaded socket.
- Restore power to the fixture.
Figure A: Electrical Switch Operation
A diagram illustrating a standard electrical switch with two positions labeled "ON" and "OFF". A hand is shown indicating the operation of the switch.
Assembly Diagram Description
An exploded view detailing the assembly process of the light fixture. Key components depicted include:
- An electrical outlet box.
- A metal mounting plate with screw holes and a central opening for wires.
- A back plate, which is the main structural component of the fixture.
- Mounting screws used to fasten the back plate to the mounting plate.
- Outlet box screws for securing the mounting plate to the outlet box.
- Additional hardware for support: anchors and wood screws.
- Electrical wires extending from the fixture, ready to be connected to the house wiring via wire nuts.
- A threaded socket designed to hold the light bulb.
- A medium base bulb (specified as 60W T-type, not included).
- A cylindrical mesh shade that attaches to the socket.
The diagram visually represents the sequence of attaching the mounting plate, connecting wires, securing the back plate, inserting the bulb, and fitting the mesh shade.
Care Instructions
- Dusting: Use a clean, dry cloth.
- Cleaning: To protect the finish, avoid any harsh abrasives or chemicals.
