EZVIZ CP4 Wire-Free Peephole Doorbell User Manual

Attention

• Do not expose the camera to harsh environments such as high temperature, humidity, salt mist, or rain, as this may damage the device.
• Avoid pressing the sensor or lens of the camera, as this may also cause damage.
• Do not pull the camera wire forcefully. Protect yourself from being cut by the wire. Damage to the wire due to improper operation is not covered by the warranty.
• Use only the provided power adapter to charge the panel; using other adapters may damage the system.

Box Content

The package typically includes:

• Panel (x1): The main indoor display unit.
• Mounting Base (x1): A bracket for attaching the device to the door. Two models (Model A and Model B) are provided, which may differ slightly in mounting structure but offer the same features.
• Camera (x1): The outdoor camera unit. Two models (Model A and Model B) are provided.
• Buckle (x1): A component for securing wires or the mounting base.
• Base Cover (x1): A cover for the mounting base (included with Model A, not with Model B).
• Screws (x6): Fasteners for installation.
• Power Cord (x1): Cable for charging the panel.
• Regulatory Information (x2): Documents containing compliance and safety details.
• Quick Start Guide (x1): A brief guide for initial setup.

Note: The base cover is only sold with Model A. Model A and Model B differ in mounting structure but provide the same features and performance. The appearance of products and accessories may vary based on purchase.

Overview

Panel Components:

• Micro SD Card Slot: Located on the side for storage.
• Home Button: Located on the side. Hold for 3-5 seconds to power the device on or off. Press to light up or turn off the screen.
• Touch Screen: The main display interface.
• Power Port: Located on the side for charging.
• Data Interface: For data connection.
• Loudspeaker: For audio output.

Camera Components:

• Sensors: Multiple sensors are present on the front. [info] Do not block the sensors.
• Microphone: For audio input.
• Bell: The doorbell button.
• Lens: Captures video.
• Loudspeaker: For audio output.

Mounting Base

Two models are available:

Model A & Model B: Each features a Hook (for hanging portable charger), a Mounting Hole, and a Data Wire Hole.

Get the EZVIZ App

To use the EZVIZ CP4, you need to connect your mobile phone to a 2.4GHz Wi-Fi network and install the EZVIZ app.

1. Download and install the EZVIZ app by searching "EZVIZ" in the App Store or Google Play™.
2. Launch the app and register an EZVIZ user account.

If you have already used the app, ensure it is the latest version by checking the app store.

Setup

Follow these steps to set up your peephole doorbell:

1. Install your peephole and power it on.
2. Log in to your EZVIZ app user account.
3. Connect your peephole to the Internet via Wi-Fi.
4. Add your peephole to your EZVIZ account within the app.

Installation

1. Install the Micro SD Card (Optional)

Insert a Micro SD card (sold separately) into the card slot on the device. In the EZVIZ app, navigate to Device Settings > Storage Status to check the SD card status. If it shows "Uninitialized," tap to initialize it; it will then change to "Normal" and be ready to store videos.

2. Install the Peephole

This document provides two mounting methods for different appearances. Choose the method corresponding to your purchased product.

Model A Installation:

If a peephole already exists, install the device in the same location. If not, drill a hole approximately 14mm in diameter (no more than 45mm) and about 145cm from the ground for optimal viewing.

1. Measure the door's thickness and select the appropriate screws from the provided options (35-60mm, 60-85mm, 85-105mm).
2. Turn the screws into the back of the camera.
3. Tear off the release paper from the adhesive.
4. Pass the screws and wire through the door. Rolling up the paper can assist this step.
5. Adjust the camera's position and gently push it close to the door.
6. Take out the mounting base, plug the connector into the slot on the bottom of the base, and attach the base cover.
7. Pass the screws through the mounting holes on the base.
8. Adjust the mounting base's position and tighten the screws.
9. Route the wires through the groove and insert the buckle.
10. Slide the panel into the mounting base.
11. Installation is complete. Remove the protective sticker.

Model B Installation:

If a peephole already exists, install the device in the same location. If not, drill a hole approximately 16.5mm in diameter (no more than 45mm) and about 145cm from the ground for optimal viewing.

1. Measure the door's thickness and select the appropriate screws (35-60mm, 60-85mm, 85-105mm).
2. Turn the screws into the back of the camera.
3. Tear off the release paper from the adhesive.
4. Pass the screws and wire through the door. Rolling up the paper can assist this step.
5. Adjust the camera's position and gently push it close to the door.
6. Take out the mounting base, and plug the connector into the slot on the bottom of the base.
7. Pass the screws through the mounting holes on the base.
8. Adjust the mounting base's position and tighten the screws.
9. Route the wires through the groove and insert the buckle.
10. Slide the panel into the mounting base.
11. Installation is complete. Remove the protective sticker.

Power On

Follow these steps to power on the EZVIZ CP4:

1. Hold the power button on the panel for 3 to 5 seconds to power it on.
2. Tap the touch screen to choose your preferred language (options include English, 简体中文, Русский, Magyar, Ελληνικά).
3. Follow the on-screen wizard to connect to your Wi-Fi network by selecting your router and entering the password.

Add to EZVIZ App

To link your device to the EZVIZ app:

1. Log in to the EZVIZ app.
2. On the Home screen, tap the "+" icon in the upper-right corner to access the QR code scanner.
3. Scan the QR code displayed on the device or within the app's settings.

If you encounter issues scanning the QR code or need to reconfigure Wi-Fi, navigate to Settings > Firmware on the touch screen to find the QR code.

Charge the Panel

Connect the panel to a power outlet using a compatible power adapter (5V 2A, sold separately). The panel can also be charged via a portable charger and hung on the hook.

• Do not charge through the interface at the bottom of the panel.
• Avoid charging the device when the temperature is below 0 degrees Celsius or above 45 degrees Celsius.

Restore to Factory Settings

To reset the device to its original factory settings, navigate to Settings > Firmware > Default and confirm the action. A confirmation dialog will appear on the panel.

Live View

Launch the EZVIZ app and tap the "Live View" button to see a live feed, listen, take snapshots, record videos, and adjust video definition.

Swipe left and right on the screen to access more icons:

Refer to the actual app interface for specific details.

Settings

Customize your device parameters through the settings page:

EZVIZ Connect

1. Use Amazon Alexa

Control your EZVIZ devices with Amazon Alexa.

Before you start:

• Ensure EZVIZ devices are connected to the EZVIZ app.
• In the EZVIZ app, disable "Image Encryption" in Device Settings.
• Have an Alexa-enabled device (e.g., Echo Spot, Echo Show) and the Amazon Alexa app installed with an account.

To Control EZVIZ devices with Amazon Alexa:

1. Open the Alexa app and go to "Skills and Games".
2. Search for "EZVIZ" and select the EZVIZ skill.
3. Tap "ENABLE TO USE".
4. Enter your EZVIZ username and password, then tap "Sign in".
5. Tap "Authorize" to allow Alexa to access your EZVIZ account.
6. You will see a confirmation message. Tap "DISCOVER DEVICES" to allow Alexa to find your EZVIZ devices.
7. In the Alexa app menu, select "Devices" to see your EZVIZ devices.

Voice Command: Discover new devices via the "Smart Home" menu or Alexa Voice Control. You can then control devices using voice commands like "show [your camera name]". Note that changing the device name in the EZVIZ app requires re-discovering the device on Alexa.

Troubleshooting: If Alexa fails to discover your device, check internet connectivity and restart both devices. If the device status is "Offline" on Alexa, check network connection and restart.

For countries where Amazon Alexa is available, see Amazon Alexa's official website.

2. Use Google Assistant

Activate your EZVIZ device and watch live feeds using Google Assistant voice commands.

Required devices and apps:

• A functional EZVIZ app.
• In the EZVIZ app, disable "Image Encryption" and enable "Audio" in Device Settings.
• A TV with Chromecast functionality.
• The Google Assistant app on your phone.

To get started:

1. Set up the EZVIZ device and ensure it works with the app.
2. Download the Google Home app and log into your Google account.
3. On the Google Home "Myhome" screen, tap "+" and select "Set up device".
4. Tap "Works with Google" and search for "EZVIZ" to find the skill.
5. Enter your EZVIZ username and password, then tap "Sign in".
6. Tap "Authorize" to allow Google to access your EZVIZ account.
7. Tap "Return to app".
8. Follow the steps to complete authorization. EZVIZ service will appear in your list of services.
9. Try voice commands using your camera's name. Users can manage devices individually or in groups.

See Google support for more information.

For additional product information, refer to www.ezviz.eu.

Initiatives on the Use of Video Products

EZVIZ emphasizes responsible use of its video products. Users are urged to comply with all applicable laws, regulations, and ethical customs to ensure privacy and prevent misuse of data.

1. Respect privacy expectations. Provide clear warning notices in public areas and evaluate third-party rights in non-public areas, obtaining consent where necessary.
2. Define usage scope to avoid infringing on portraits, privacy, or other rights.
3. Data controllers must comply with laws, norms, and respect individual privacy and rights when processing video data.
4. Prioritize product and data security to prevent leakage or improper use. Implement access controls and secure network environments.
5. Ensure products are used properly and in good faith, contributing positively to social security and avoiding violations of human rights or criminal activities.

Appendix

1. Rechargeable Lithium Ion Battery

The device uses a portable, non-removable lithium-ion battery.

2. Information for Private Households

1. Separate collection of waste equipment: Dispose of waste electrical and electronic equipment separately from municipal waste.
2. Batteries and rechargeable batteries: Separate waste batteries and rechargeable batteries from the equipment before disposal, unless the equipment is prepared for reuse.
3. Options for returning waste equipment: Return waste equipment free of charge to public collection points or manufacturer/distributor take-back points. Stores with significant sales areas for electronics are obliged to take back old equipment.
4. Privacy Notice: Waste equipment may contain sensitive personal data. Users are responsible for deleting their data before disposal.
5. Meaning of the symbol "crossed-out wheelie bin”: This symbol indicates that the device must be collected separately from unsorted municipal waste at the end of its service life.