ℹ️ Document Conversion Notice:
This document has been converted from PDF and formatted to fit this screen. Diagrams and images may be available only in the original here.
This manual includes important safety performance information and service information. Please make sure you have read the following warning content before the first time you use our product.
If you borrow your electric bicycle to other people, please let the user read this manual, it could help to decrease the risk of accident.
Please wear a suitable and safe helmet before riding. Please wear clothes with fluorescent and reflective stripes when you ride at night. Do not exceed the speed limit; it is a main reason for traffic accidents. We should abide by traffic rules and not exceed the speed limit.
Do not touch the charging hole on the bike, or use metal to touch it, otherwise, an accident will be caused by the transient short circuit of the current.
Zero starting, frequent braking, driving against the wind, carrying people or anything, and insufficient air pressure on the tires all use much electric energy, and then reduce the endurance mileage. If you want the best endurance mileage, please do the following:
Please use assist mode.
On the premise of safety, do not brake frequently or use zero starting.
Do not overload.
Before riding, please check the pressure of the tire and supply enough pressure.
Our Ebike should avoid prolonged exposure to the sun or rain. Avoid storage in places with high temperature or corrosive gas, so as to avoid electroplating parts and paint surface by chemical corrosion and electrical parts damage, resulting in operational failure and accidents.
Your current insurance business may not cover the situation you may encounter when riding an electric bike. Please contact your insurance company or insurance broker for relevant consultation.
According to the law in China, riding an electric bicycle or a three-wheeled electric bike requires reaching the age of 16. If you use this product in other countries, please refer to the local laws and regulations.
Bicycles are vehicles with certain risk factors. Please be sure to abide by the traffic rules. At the same time, when emergency braking, brake the rear wheel first, then brake the front wheel. When cycling speed is too fast, there is a danger of tipping over if you brake the front wheel suddenly. Please ride carefully.
Page EN-3
2. Unpacking and product specs
Remove all package material, then inspect each item for any accident damage that may have occurred during shipping. You should find each of these items in your box:
1. ELECTRIC BIKE
2. TOOLS: LARGE WRENCH *2, ALLEN WRENCHES *4, SCREWDRIVER *1
3. BATTERY CHARGER
ITEM
SPECIFICATIONS
Model
MY275
Product Dimensions
183x67x113(cm)
Package Dimensions
145x23x80(cm)
Max Load
265 lbs(120kg)
Package Weight
66 lbs(30kg)
E Bike Weight
54 lbs(24.5kg)
Max Speed
15.5mph
Battery/Charger
Input 100-240V 50/60Hz AC Plug; Output 48V2A DC2.1
Pedal-Assist Mode
Approx 37-43 miles (60-70km)
Pure Electric Mode
Approx 18-22 miles (30-35km)
Max Angle of Climb
14 degrees
Charging Time
6-7 hours
Tire Pressure
40-65 PSI
Bell/Horn
Electric Horn Installed
USB Charging Port
Output Voltage 5V1A
Frame Material
6061 Aluminum Alloy
IP Level
Ip54
Page EN-4
3. Product components
Diagram showing the components of the SAMEBIKE electric bike with numbered labels.
1. Handlebar
2. Headlights
3. Suspension
4. Disc brake
5. Tire
6. Battery
7. Pedal
8. Crankset
9. Chain
10. Flywheel
11. Saddle
12. Seatpost clip
Page EN-5
4. Method of product assembly
4.1 Adjust handlebar and stem
Loosen the screw, the stem will be 180° to adjust the direction.
Remove 4 screws.
Install the handlebar to adjust the direction.
Tighten 4 screws to fix the handlebar.
4.2 Installing the front wheel
Put the headlights and the front fender into the screws and tighten them.
Prepare the front tires.
Reverse the bike for easy installation.
Install the side with the e-bike disc into the direction with the disc brake.
Put the quick release handle into the tire.
Tighten the spring and nut to the screw.
After screwing to a certain strength, fasten the quick release handle in the direction of the arrow.
Lock the quick release handle to complete the front wheel installation.
Page EN-6
4.3 Seat installation
Loosen the quick release lever according to the direction.
Insert the seat tube in the direction.
After adjusting the seat direction and height, lock the quick release lever.
Complete the seat installation.
4.4 Assemble the Fender and headlight
Take out the front & rear fender.
Loosen the set screw counterclockwise.
Put in and tighten the headlights and front fender respectively.
Install the headlights and front fender.
Put the rear fender in and tighten it counterclockwise.
Installed rear fender.
Page EN-7
4.5 Mounting pedal
Prepare to pedal left and right. The pedal "R" is installed on one side of the chainring, and "L" is opposite to the chainring.
Tighten the right pedal "R" clockwise.
Tighten the left pedal "L" counterclockwise.
4.6 The method of removing the battery
Turn the key clockwise to unlock the battery lock.
Remove the battery upwards.
Remove the battery.
5. Product instruction
5.1 Charging method
Plug the charger into the power hole.
The battery can also be removed for charging.
Plug the charger into power supply.
Red light shows the battery is charging, green light is full.
Page EN-8
5.2 LCD Display (functional instruction)
Functions
The MY275 meter offers a variety of features to meet your cycling needs, including:
Intelligent electric power display
Motor power indicator
Motor power indicator
Speed display (including real-time speed, maximum speed, average speed)
Mileage display (including single mileage and total mileage)
Assist pushing control and display
Cycling time display
Backlight Control and Display
Error code display
USB connection indicator
Multiple parameter settings (such as: wheel diameter, speed limit, battery power setting and assist parameter setting, etc.)
Illustration of the LCD display showing Battery Level, Motor power, Time, Max speed, Mode, Speed, and Gear.
Page EN-9
Assist pushing mode
Press and hold the "-" button, and after 2 seconds, the electric bike will enter the state of electric assist pushing mode. Electric bike travel at a speed of less than 6 kilometers per hour. At the same time, the screen displays "". Release the "-" button, the electric bike will stop the power output immediately and return to the state before assist pushing mode.
Illustration of the LCD display showing assist pushing mode.
Assist pushing mode can only be used when the user is pushing the electric bike. Do not use it while riding.
Headlight control
Press the "+" button for 2 seconds to turn on the headlight. After turning on the headlight, the backlight brightness will decrease. Press the "+" button again for 2 seconds to turn off the headlight.
Power gear selection
Short press "+" or "-" button to switch the power gear of the electric bike and change the output power of the motor. The default output power range of the meter is 0-5, 0 is stop power output, 1 is the lowest power, 5 is the highest power. When reaching the 5th gear, press the "+" button again, the meter screen will still display 5, and flash 5 to indicate that the current is the highest gear. After the power-assisted downshift reaches the 0th gear, short press the "-" button again, the meter screen still displays 0, and 0 flashes to indicate that the current is the lowest gear. Meter startup default gear is 1.
Illustration of the LCD display showing power gear selection.
Page EN-10
Motor power and USB connection indicator
The output power of the motor can be known through the meter. When the meter is inserted into the USB external device, the meter will be showed as shown in the picture below.
Illustration of the LCD display showing motor power and USB connection.
Error code display
When the electric bike electronic control system fails, the meter will display the error code automatically. For the detailed definition of the error code, see Attached Table 1.
Error code
Definition
21
Current anomaly
22
Throttle anomaly
23
Motor anomaly
24
Motor Hall signal anomaly
25
Brake anomaly
30
Communication anomaly
When the error code is displayed, please troubleshoot the fault in time. After the fault occurs, the electric bike will not run normally.
Page EN-11
6. Notes
Before riding, please read the "User's Manual" carefully. Please check whether the parts are in good condition to ensure the safety of your riding.
Please check the status of the vehicle. Please check the brake, wheel, handlebar, folding buckle, and quick release part of the electric bike to make sure the electric bike is in good status.
Please check the electrical system: To know whether the battery power is enough. If it is not enough, you need to charge it as soon as possible.
Please check whether the brake system works properly. If it doesn't work properly, please stop using it and contact the official customer service person.
7. Warranty policy
Users should operate in accordance with the product manual. In case of any performance fault caused by production quality, the company shall perform the obligations of the three guarantees in accordance with the provisions of relevant laws and regulations of the state.
The company is still responsible for the after-sales service of the faults beyond the three guarantees and the major components in the three guarantees, but there will be a cost for repair.
If the battery needs replacement outside the warranty time, our company will supply the battery at factory price. To ensure safety and not to pollute the environment, the battery must be 1:1 recycled and returned to the battery manufacturer.
EPAC EN 15194 certification and CE mark.
GUANGZHOU SAMEWAY ELECTRIC BICYCLE CO., LTD
Address: NO.1 Factory, Xiling, HuaShan town, HuaDu district, GuangZhou City, Guang Dong Province CHINA
MADE IN CHINA
Page EN-12
AFTER SALES PROBLEMS
SCAN THE QR CODE
QR code for after-sales problems and product information.
GUANGZHOU SAMEWAY ELECTRIC BICYCLE CO.,LTD
Add: NO.1 Factory, Xiling, HuaShan town, HuaDu district, GuangZhou City, GuangDong Province CHINA
SAMEBIKE LO26-II User Manual: Folding Electric Mountain Bike Instructions Official user manual for the SAMEBIKE LO26-II folding electric mountain bicycle. Contains detailed instructions on assembly, product components, folding methods, charging, operation, button functions, safety warnings, and warranty policy from Guangzhou SameWay Electric Bicycle Co., Ltd.
SAMEBIKE L026-II Folding Electric Mountain Bike User Manual Comprehensive user manual for the SAMEBIKE L026-II folding electric mountain bike, covering assembly, operation, safety warnings, and component details. Learn how to use and maintain your electric bicycle.
SAMEBIKE XD26 Electric Mountain Bicycle User Manual Comprehensive user manual for the SAMEBIKE XD26 electric mountain bicycle, covering assembly, operation, specifications, safety warnings, and warranty information.
SAMEBIKE LOTDM 200 Electric Bike User Manual and Specifications Comprehensive guide to the SAMEBIKE LOTDM 200 electric bike, covering specifications, assembly, maintenance, safety, warranty, and return policy. Learn about battery management, motor care, and riding tips.
