1. Important Warning
This manual contains important safety performance information and service information. Please read the following warnings carefully before using the product for the first time.
If lending your electric bicycle to others, please ensure the user reads this manual to help decrease the risk of accidents.
Always wear a suitable and safe helmet when riding. Wear clothes with fluorescent and reflective stripes when riding at night. Do not exceed the speed limit, as this is a primary cause of traffic accidents. Always abide by traffic rules.
Do not touch the charging port on the bike with metal objects, as this can cause accidents due to transient short circuits.
Practices such as zero starting, frequent braking, riding against the wind, carrying passengers or heavy loads, and insufficient tire pressure consume more electric energy, reducing the endurance mileage. For optimal endurance mileage, follow these recommendations:
- Use assist mode.
- On the premise of safety, avoid frequent braking or zero starting.
- Do not overload the bicycle.
- Before riding, check tire pressure and ensure it is adequately supplied.
Avoid prolonged exposure of the e-bike to sun or rain. Do not store it in places with high temperatures or corrosive gas, as this can cause chemical corrosion to electroplated parts and paint surfaces, leading to electrical component damage and operational failure.
Your current insurance may not cover all situations encountered while riding an electric bike. Please consult your insurance company or broker for relevant advice.
When using the e-bike in your country, please refer to local laws and regulations. For example, in China, the minimum age for riding an electric bicycle is 16.
Bicycles are vehicles with inherent risks. Please abide by traffic rules. In case of emergency braking, brake the rear wheel first, then the front wheel, especially at high speeds. Sudden braking with the front wheel can cause tipping over; please ride carefully.
2. Unpacking and Product Specs
Remove all package material and inspect each item for any damage that may have occurred during shipping. You should find the following items in your box:
Electric Bike: The SAMEBIKE XD26 electric mountain bicycle.
Tools: Includes a large wrench (x2), allen wrenches (x4), and a screwdriver (x1).
Battery Charger: For charging the e-bike's battery.
Specifications
| Item | Specifications |
|---|---|
| Model | XD26 |
| Product Dimensions | 1760x670x1000 (mm) |
| Package Dimensions | 1360x240x720 (mm) |
| Max Load | 220.4 lbs (100kg) |
| Package Weight | 63.9 lbs (29KG) |
| E Bike Weight | 56.2 lbs (25.5kg) |
| Max Speed | CE: 25km/h, UL: 32km/h, Other: 40km/h |
| Battery/Charger | Input: 100-240V 50/60Hz AC Plug; Output: 54.6V2A DC2.1 |
| Pedal-Assist Mode Range | Approx 56-62 miles (90-100km) |
| Pure Electric Mode Range | Approx 28-31 miles (45-50km) |
| Max Angle of Climb | 25 degrees |
| Charging Time | 4-8 hours |
| Tire Pressure | According to the actual information on the tire |
| Bell/Horn | Electric Horn Installed |
| USB Charging Port | Output Voltage 5V1A |
| Frame Material | 6061 Aluminum Alloy |
| IP Level | IP54 |
3. Product Components
The SAMEBIKE XD26 electric mountain bicycle consists of the following main components:
- 1. Handlebar
- 2. Display
- 3. LED Front light
- 4. Suspension Fork
- 5. Disc brake
- 6. Tire
- 7. Battery
- 8. Pedal
- 9. Crankset
- 10. Chain
- 11. Motor
- 12. Flywheel
- 13. Seatpost
- 14. Saddle
4. Method of Product Assembly
4.1 Adjust Handlebar and Stem
Rotate the stem and suspension fork by 180 degrees and set aside. Install the handlebar to adjust the direction. Tighten the four screws to fix the handlebar.
4.2 Assemble the Fender and Headlight
Loosen the set screw (turn counter-clockwise). Insert and tighten the front headlights. Insert and tighten the front fender. Put in and tighten the nut.
4.3 Installing the Front Wheel
Take out the Quick Release Lever and the front wheel. Insert the quick release lever, tighten the spring and nut onto the screw. Fasten the quick release lever in the direction of the arrow. Install the disc brake of the front wheel. Tighten the disc brake clockwise. Finish installation.
4.5 Mounting Pedal
Prepare the left and right pedals. The pedal marked "R" is installed on the side of the chainring (indicated by a sticker). The pedal marked "L" is opposite to the chainring. Tighten the pedals.
4.6 Seat Installation
Loosen the quick release lever according to the direction. Insert the seat tube in the direction indicated. Lock the quick release lever. Complete the seat installation.
5. Product Instruction
5.1 Charging Method
Locate the charging port at the bottom of the frame. Open the charging port cover. Plug the charger into the charging port. A red light indicates the battery is charging; a green light indicates the battery is full.
5.2 LCD Display (Functional Instruction)
The XD26 meter offers various features for your cycling needs, including:
- Intelligent electric power display
- Gear display
- Motor power indicator
- Speed display (including real-time speed, maximum speed, average speed)
- Mileage display (including single mileage and total mileage)
- Assist pushing control and display
- Cruise indication
- Highlight Control and Display
- Error code display
- USB connection indicator
- Bluetooth connection indicator
- Multiple parameter settings (e.g., wheel diameter, speed limit, battery power setting, assist parameter setting, etc.)
The display includes indicators for Power, Error Code, Real-time Speed, Assist Pushing, Gear, Highlight, Bluetooth Connection, USB Connection, and Cruise. It also shows Single Mileage, Total Mileage, Maximum Speed, and Average Speed.
Controls include a Plus key (+), Toggle key (i), Headlight key, and Minus key (-).
Power On/Off
Press and hold the power on/off button to start the meter and turn on the controller's working power. To turn off the power, long-press the power on/off button again. When off, the meter does not use battery power, and the leakage current is less than 1μA. The meter will automatically shut down if the electric bike is not used for more than 10 minutes.
Assist Pushing Mode
Press and hold the Minus button for 2 seconds to enter electric assist pushing mode. The electric bike will travel at a speed of less than 6 kilometers per hour. Releasing the Minus button will stop the power output immediately and return the bike to the previous state.
Headlight Control
A short press of the Headlight button turns on the headlights and dims the instrument backlight. Pressing it again turns off the headlights and restores the instrument backlight to its normal brightness.
Power Gear Selection
Short press the Plus or Minus buttons to switch the power gear and change the motor's output power. The default output power range is 0-5, where 0 is stop power output, 1 is the lowest, and 5 is the highest. Pressing the Plus button again when at gear 5 will cause the screen to display '5' flashing, indicating the highest gear. Pressing the Minus button when at gear 0 will cause the screen to display '0' flashing, indicating the lowest gear. The meter's default startup gear is 1.
Display Interface Switching
After the instrument powers on, it defaults to displaying real-time speed (km/h) and total mileage (km). Short press the Toggle key to switch between total mileage (km), single mileage (km), maximum speed (km/h), and average speed (km/h).
Error Code Display
If the electric bike's electronic control system fails, the meter will display an error code automatically. Refer to Table 1 for detailed error code definitions (Table 1 not provided in this document). Cautions: When an error code is displayed, troubleshoot the fault promptly. The electric bike may not operate normally when an error occurs.
6. Preparation Before Riding
- Before riding, please read the User Manual carefully. Check that all parts are in good condition to ensure riding safety.
- Check the vehicle's status: Inspect the brakes, wheels, handlebar, folding buckle, and quick release parts to ensure the electric bike is in good working order.
- Check the electrical system: Ensure the battery power is sufficient. If not, charge it as soon as possible.
- Check the brake system: If the brakes are not working properly, stop using the bike and contact the official customer service.
7. Warranty Policy
- Users must operate the product in accordance with this manual. For performance faults caused by production quality, the company will fulfill its obligations under the state's relevant laws and regulations for the "three guarantees" (repair, replacement, refund).
- The company also provides after-sales service for faults beyond the "three guarantees" period and for major components, but repair costs may apply.
- If the battery needs replacement outside the warranty period, it can be purchased at the factory price. For safety and environmental protection, the old battery must be returned for recycling (1:1 replacement).
Certifications and Manufacturer Information
This product complies with EPAC EN 15194 standards and carries the CE mark.
Manufacturer: GUANGZHOU SAMEWAY ELECTRIC BICYCLE CO., LTD.
Address: NO.1 Factory, Xiling, HuaShan town, HuaDu district, GuangZhou City, Guang Dong Province, CHINA.
Made in China.
