Tzumi Wireless Charging Alarm Clock
Product Dimensions: 76.2*95.25mm
Wireless Charging Alarm Clock User Guide
The tzumi Wireless Charging Alarm Clock is designed to charge your phone and wake you up on time. It features a modern LED display and a wireless charging base that powers smartphones, AirPods, and other compatible devices overnight. The display brightness is adjustable for maximum comfort using user-friendly buttons.
Product Overview and Function
This section describes the physical components and basic functions of the alarm clock.
Key Components:
- LED Screen: Displays time and other information.
- Micro USB Port: For powering the device. Represented by a [USB] symbol in the original diagram.
- Alarm Time: Indicates the setting for the alarm.
- Wireless Charge Pad: The surface where compatible devices are placed for charging.
Features:
- Easy to use settings.
- LED digital display.
- Wirelessly charges smartphones and other compatible devices.
Getting Started
Powering the Unit
Connect the Micro USB cable to the charging port on the alarm clock and plug the other end into a USB power source.
Setting the Clock
Press and hold the time button for 2 seconds to enter the time setting mode. The time will flash.
- Press the time button again, then use the + and - buttons to switch between 12-hour and 24-hour modes.
- Press the time button again to enter the hour setting mode. Use the + or - buttons to adjust the hours.
- Press the time button again to enter the minute setting mode. Use the + or - buttons to adjust the minutes.
- Press the time button again to confirm the time.
Adjusting the Display Brightness
There are three brightness levels. Long-press the brightness button for 3 seconds to cycle to the next level. The maximum brightness is set by default on first use.
Setting the Alarm
Press and hold the alarm button for 2 seconds to enter the alarm setting mode. The alarm time will flash.
- Press the alarm button again, then use the + or - buttons to adjust the hours.
- Press the alarm button again to enter the minutes setting mode. Use the + or - buttons to adjust the minutes.
- Press the alarm button again to confirm the alarm time.
- Press the alarm button twice to turn the alarm ON and OFF.
Note: When the alarm rings, press the alarm button to turn the alarm OFF or press any other button to snooze the alarm for 5 minutes.
Wireless Charging
- The charging pad supports Qi-compatible phones, AirPods, and other devices.
- The charging indicator light will illuminate when a device is charging.
- If a foreign object is detected on the wireless charging pad, the status light will blink repeatedly.
Specifications
| Size: | 141.5 x 12.67 x 5.45cm |
|---|---|
| Weight: | 161g |
| Input: | 9V 2A |
| Wireless Charging: | 10W |
| Materials: | ABS + PC |
Safeguards
Please note that improper use of this unit may result in potential electric shock or fire hazards. Please read and follow all safety instructions carefully before installation and use.
- This unit should not be used near water, such as near a bathtub, kitchen sink, laundry tub, or in a wet basement, as it poses a serious risk of electric shock.
- Keep the unit away from heat sources like radiators, heat registers, or other appliances that emit heat.
- Connect the unit only to the power supply described in the operating instructions.
- If the unit is damaged or does not operate normally, it should be serviced by qualified personnel. Do not attempt to repair it yourself.
- To reduce the risk of electric shock, do not expose this product to rain or moisture.
Support and Contact Information
For any questions or issues regarding product use and/or care, please contact tzumi Technical Support:
- Email: support@tzumi.com
- Phone: 1-855-GO-TZUMI
life just got better.
Distributed by tzumi Inc. NY, NY 10016. Copyright 2021 tzumi Inc. All Rights Reserved. Made in China. Other trademarks and trade names are those of their respective owners. Subject to change without prior notice.
