Monster N-Lite Clear Talk

Model: MH22107

Quick Start Guide

Please read this Quick Start Guide carefully and keep it for future use.

Product Overview

In-ear Earphone x 2 (left & right)
Charging Case
USB-C Charging Cable
Ear Tips × 3 pairs (medium pre-installed)
Quick Start Guide and Warranty Letter

Diagram showing the components of the Monster N-Lite Clear Talk earbuds and charging case:

1. Multi Function Button (MFB): The primary button for controlling calls, music, and pairing.
2. Microphones: Located on the earbuds for calls and voice commands.
3. Ear Tip: Provides a comfortable and secure fit in the ear.
4. Indicator Light: Shows the status of the earbud (e.g., pairing, charging).
5. Reset Button: Used to reset the earbuds to factory settings.
6. USB-C Charging Port: Connects the charging cable to power the case.
7. Charging Case Indicator Light: Indicates the charging status of the case.

Power On/Off

The earphones turn on automatically when the charging case is opened. To turn them off, place the earphones back into the charging case; charging will begin when the cover is closed.

Charging Case Charging

Connect the included USB-C cable to the charging port. The charging case indicator light will illuminate while charging and turn off when fully charged.

Pairing

The left and right earphones will power on and connect to each other automatically when the charging case is opened, indicated by a "pairing" voice prompt. For new device connections, navigate to your device's Bluetooth settings, search for new devices, and select "new Monster device." A "connected" voice prompt will confirm successful pairing. When powered on, the earphones will attempt to connect to the last paired device. To pair with a new device, turn off or disconnect the current Bluetooth connection.

Volume Control

Volume Down: Double-tap the MFB on the left earphone during music playback.
Volume Up: Double-tap the MFB on the right earphone during music playback.

Call Management

Answer/End Call: Single-tap the MFB.
Reject Call: Press and hold the MFB for 2 seconds.

Music Control

Play/Pause Music: Single-tap the MFB.
Previous Song: Press and hold the MFB on the left earphone for 2 seconds.
Next Song: Press and hold the MFB on the right earphone for 2 seconds.

Voice Control

When connected to a mobile phone, triple-tap the MFB to activate the voice assistant.

Reset to Factory Settings

With the charging case open and both earphones inside, press and hold the Reset Button for 10 seconds. The Charging Case Indicator Light will flash, indicating the earphones have entered factory settings mode. Complete the new device pairing via your device's Bluetooth interface.

Indicator/Voice Prompt Guide

Mode	Description	Voice Prompts
Power On	Earphones turn on when the charging case cover is opened.
Power Off	Place the earphones in the charging case and close the cover.
Pairing	Earphones search for the last connected device upon power-on. If no device is found, they automatically enter pairing mode. The Indicator Light flashes red and white alternately during pairing.
Connected	Earphones are connected to your device.	"Connected"
Earphones charging	The Indicator Light is white while earphones are charging and turns off when fully charged.	-
Charging case	The Charging Case Indicator Light is white while the case is charging and turns on when fully charged.	-

Cautions

After removing earphones from the charging case without pressing any buttons, they will connect automatically. If no connections are found, they will enter automatic pairing mode.
Ensure earphones are placed in the correct location (L/R) for proper charging.
Replacement of the battery is not recommended.
Do not expose the battery pack to excessive heat, such as direct sunlight or fire.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FCC ID: 2AVD2-MH22107

	Monster N-Lite 203 Airlinks Bluetooth Headphones Quick Start Guide Concise guide to setting up and using Monster N-Lite 203 Airlinks Bluetooth headphones, covering pairing, controls, and features.
	Monster N-Lite 211 Quick Start Guide and Specifications A concise guide to setting up, pairing, and using the Monster N-Lite 211 Bluetooth earphones, including operational instructions and technical specifications.
	Monster N-Lite 210 Quick Start Guide A quick start guide for the Monster N-Lite 210 earphones, covering charging, pairing, wearing, and basic operations.
	Monster Clarity 8.0 ANC True Wireless Earbuds Quick Start Guide Quick start guide for Monster Clarity 8.0 ANC True Wireless Earbuds, covering setup, pairing, controls, and troubleshooting.
	Monster N-Lite 206 Bluetooth Headphones Quick Start Guide A comprehensive guide to setting up and using your Monster N-Lite 206 Bluetooth headphones, including pairing, controls, and troubleshooting.
	Monster N-Lite 203 Airlinks Quick Start Guide A concise guide to setting up and using the Monster N-Lite 203 Airlinks wireless earbuds, covering pairing, controls, and basic functions.
	Monster N-Lite 216 Bluetooth Headphones Quick Start Guide and Specifications This document provides a quick start guide for the Monster N-Lite 216 Bluetooth headphones. It covers charging, power on/off, pairing, wearing instructions, reset procedures, button operations, LED indicators, important attention points, FCC compliance statements, IC caution, and a hazardous substances table.
	Monster Bluetooth Headphones MH72002 Quick Start Guide Concise guide to setting up and using Monster MH72002 Bluetooth Headphones, covering pairing, controls, and LED indicators.