Monster Clarity 8.0 ANC Quick Start Guide
Model No: MH22002
Please read this Quick Start Guide carefully and keep it for future use.
Product Overview
The product includes the following items:
- In-ear Earphones x 2 (left & right)
- Charging Case
- USB-C Charging Cable
- Ear Tips × 3 pairs (M size installed)
- Quick Start Guide and Warranty Letter
Product Components and Labels:
The diagrams illustrate the earphones and charging case with numbered labels:
- 1. Multi Function Button (MFB)
- 2. Microphones
- 3. Ear Tip
- 4. Charging contacts
- 5. USB-C Charging Port
- 6. Pair/Reset Indicator Light
- 7. Charging Case Indicator Light
Power On/Off
Earphones turn on automatically when the charging case is opened. To turn off, place the earphones in the charging case and close the cover. Charging will start when the cover is closed.
Charging Case Wired/Wireless Charging
The charging case can be charged using the included USB-C cable or a compatible wireless charging device. The charging status is indicated by the case's LED.
Noise Cancellation On/Off
Press and hold the MFB of the right earphone for 2 seconds to switch between modes: [Noise Cancellation Off] – [Ambient On] – [Noise Cancellation On].
Pairing
Left and right earphones turn on and connect automatically when the charging case is opened, indicated by a "pairing" voice prompt. For new device connection, enable Bluetooth on your device, search for "Monster device", and pair. A "connected" voice prompt will be heard upon successful pairing. When turned on, earphones attempt to connect to the last paired device. To pair a new device, disconnect the current Bluetooth device.
Connecting Other Devices
To initiate pairing mode for connecting to other devices, keep the earphones in the charging case, open the cover, and press and hold the Pair/Reset button for about 5 seconds until the indicator light flashes. Then, activate Bluetooth on your device and search for new devices.
Volume Control
These earphones do not have an independent volume control function. Volume is adjusted via the connected device's volume controls after Bluetooth connection.
Call Controls
- Answer / End a call: Single tap the MFB.
- Reject a call: Press and hold the MFB for about 2 seconds.
Music Controls
- Play/Pause music: Single tap the MFB.
- Previous song: Double tap the MFB of the left earphone.
- Next song: Double tap the MFB of the right earphone.
Voice Control
When connected to a phone, press and hold the MFB of the left earphone for approximately 2 seconds to activate or deactivate the voice assistant.
Reset to Factory Settings
To reset to factory settings, open the charging case, keep both earphones inside, and press and hold the Pair/Reset button for 10 seconds. The red indicator light on the charging case will flash quickly, indicating the reset is complete.
LED Indicator Guide
| Mode | Description | Voice Prompt |
|---|---|---|
| Power On | - | "Power On" |
| Power Off | - | "Power Off" |
| Pairing | The white LED indicator of the charging case flashes quickly | “Pairing" |
| Connected | After connected, Indicator light goes off | "Connected" |
| Earphones charging | When the earphone is charging, the indicator light of the charging case flashes and turns off when it is fully charged | - |
| Charging case | During charging, the indicator light of the charging case is on, and the light is off when it is fully charged | - |
Cautions
- Please place the earphones in the correct location (L/R) for normal charging.
- Replacement of battery (on your own) is not recommended.
- Do not expose battery (battery pack) to excessive heat such as direct sunlight or fire.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- ✔️ Reorient or relocate the receiving antenna.
- ✔️ Increase the separation between the equipment and receiver.
- ✔️ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- ✔️ Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FCC ID: 2AVD2-MH22002
