Monster N-Lite 206 Bluetooth Headphones
Quick Start Guide
Product Overview
- In-ear Earphone x 2 (left & right)
- Charging Case
- USB-C Charging Cable
- Ear Tips x 3 pairs (medium pre-installed)
- Ear support x 1 pair
- Quick Start Guide and Warranty Letter
Model No.: MH22193
Product Name: N-LITE 206
This product is insured by Ping An Insurance Company of China.
Components:
- 1. Earphone indicator
- 2. MFB (Multi-Function Button)
- 3. Charging contact
- 4. Ear tip
- 5. Charging case indicator light
- 6. USB-C charging port
Getting Started
Power On/Off
Open the cover of the charging case, and the earphones will turn on automatically. Place the earphones into the charging case, close the cover, and the earphones will automatically turn off and charge.
Charging
Use the provided USB-C charging cable to charge the case. The charging case indicator light shows the charging status. When the charging case is fully charged, the indicator light will stay on.
Pairing
Open the charging case cover. To connect a new device, turn on your phone's Bluetooth and search for "Monster N-Lite 206" to pair.
Controls
Volume Control:
- Turn down the volume: While music is playing, single-click the MFB on the left earphone.
- Turn up the volume: While music is playing, single-click the MFB on the right earphone.
Calls:
- Answer/end a call: Double-click the MFB.
- Reject a call: Long press the MFB.
Music:
- Play/Pause music: Double-click the MFB.
- Previous track: While connected to a phone, quickly touch the MFB on the left earphone 3 times.
- Next track: While connected to a phone, quickly touch the MFB on the right earphone 3 times.
Voice Control
When connected to a phone, long press the MFB for 2 seconds to wake up the voice assistant.
Reset to Factory Settings
When the earphones are powered on and not connected to a Bluetooth device, press the MFB button on one earphone five times. The earphone's white light will stay on for 5 seconds, then turn off, restoring the factory settings.
Indicator/Voice Prompt Guide
| Key Operation | Mode | Description | Voice Prompt |
|---|---|---|---|
| Power On | White light flashes quickly | System prompts voice | |
| Power Off | White light is on for 2 seconds, then off | System prompts voice | |
| Pairing | White light flashes quickly | System prompts voice | |
| Connected | White indicator is on for 1 second, then off | System prompts voice | |
| Charging Case Charging | When charging the case, the indicator light flashes. It stays on after being fully charged. |
Cautions
- After removing the earphones from the charging case, they will connect automatically without pressing any buttons. If no connections are found, they will enter automatic pairing mode.
- Please place the earphones in the correct location (L/R) for normal charging.
- Replacement of the battery is not recommended without authorization.
- The battery pack should not be exposed to excessive heat such as direct sunlight or fire.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FCC ID: 2AVD2-MH22193








