Monster N-Lite 211 Quick Start Guide
Model No: MH22229
Product Overview
This Quick Start Guide provides essential information for using the Monster N-Lite 211 earphones. Please read carefully and keep for future reference. This product is insured by Ping An Insurance Company of China.
Package Contents:
- Earphones x2 (Left & Right)
- Charging Case x1
- USB-C Cable x1
- Quick Start Guide and Warranty Card
Charging
Before first use, fully charge the earphones and the charging case using the provided USB-C cable and a power adapter. The USB-C port is located on the charging case.
Power On/Off
Power On: Open the charging case cover. The earphones will turn on automatically.
Power Off: Place the earphones into the charging case and close the cover. The earphones will power off and begin charging.
Pairing
Open the charging case cover to automatically turn on the earphones. For new device connections, enable Bluetooth on your device and select "Monster N-Lite 211" from the list. You will hear system prompts upon successful connection.
If previously connected, the earphones will automatically connect to the last paired device upon powering on.
Wearing
Insert the Monster N-Lite 211 into your ears and rotate gently for a comfortable fit to ensure optimal wearing and sound quality.
MFB (Multi-Function Button) Operation
- Answer/End Call: Press the MFB on the left or right earphone twice.
- Reject Call: Press and hold the MFB on the left or right earphone for 2 seconds.
- Voice Assistant: Press the MFB on the left or right earphone twice.
LED Indicators
Earphone LED Indicator:
- Power On: White light flashes rapidly.
- Power Off: White light stays on for 1 second then turns off.
- Pairing Successful: White light stays on for 1 second then turns off.
- Pairing Timed Out: Orange light stays on for 2 seconds then turns off.
- Disconnecting Phone: Orange light flashes slowly.
- Low Battery: Orange light stays on for 2 seconds then turns off.
Charging Case LED Indicator:
- Charging: The digital display shows the battery percentage. When charging, the last digit of the percentage flashes. The display turns off after 10 seconds when fully charged (shows 100).
- Discharging (Earphones Charging): The power bar on the screen flashes from bottom to top. The screen turns off when earphones are fully charged.
- Power Display: The digital display shows battery level for 10 seconds upon opening/closing the case cover.
Reset to Factory Settings
With the earphones powered on, press the touch control (MFB) on both earphones 5 times simultaneously. The earphones will automatically shut down and reset. Place the earphones back into the charging case and then remove them. They will power on automatically and enter pairing mode.
Additional Operations (Chinese Section Translation)
The following operations are described in Chinese but correspond to the functions mentioned above:
- 接听 (Answer Call): Double-click left or right earphone.
- 挂断 (End Call): Double-click left or right earphone.
- 拒接 (Reject Call): Long press MFB on left or right earphone for 2 seconds.
- 语音助手 (Voice Assistant): Double-click left or right earphone.
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.
Specifications
Dimensions: 75x95MM
Weight: 105G
Printing: Double-sided coated paper + 4C printing + accordion fold