NUX Drive Core Deluxe MKII (Wasabi Drive) User Manual
Brand: NUX
Product Type: Guitar Effects Pedal
Introduction
Copyright © 2024 Cherub Technology Co., Ltd. All rights reserved. NUX and DRIVE CORE DELUXE MKII are trademarks of Cherub Technology Co., Ltd. Other product names used herein are trademarks of their respective companies, which are not affiliated with or subsidiaries of Cherub Technology Co.
Accuracy of Information
Although Cherub Technology Co. has made every effort to ensure the accuracy and completeness of this document, it makes no warranties regarding the completeness or accuracy of its contents.
Safety Precautions
WARNING! IMPORTANT SAFETY INSTRUCTIONS
READ THIS MANUAL COMPLETELY BEFORE CONNECTING
WARNING: To prevent fire or electric shock, keep this unit away from rain or moisture.
ATTENTION: To prevent fire or electric shock, do not open the unit's casing. There are no user-serviceable parts inside. For repair and servicing, refer to qualified specialists.
FCC Compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The lightning bolt symbol ⚡️ in a triangle indicates dangerous voltage and potential electric shock hazard.
The exclamation mark symbol ⚠️ in a triangle indicates important information in the operating instructions that must be read.
- Power adapter is not included.
- Do not install the unit near heat sources such as radiators, heaters, or equipment that produces heat.
- Ensure no water or foreign objects enter the unit.
- Do not attempt to repair this unit yourself. Do not open the unit's casing, as there are high-voltage areas inside that can cause electric shock if touched. For repair and servicing, refer to qualified specialists or a service center.
- Refer to qualified specialists or a service center for repair and servicing. Servicing may be required if the unit is damaged in any way, such as if liquid has spilled into the unit, if the unit has been dropped, or if it is not operating normally.
- If the unit will not be used for a long period, disconnect it from the power source.
- Ensure no one can step on or place objects on the power cord. Pay special attention to the condition of the power cord near the plugs and where it exits the unit.
- Prolonged listening at high volume levels can lead to irreversible hearing loss. Be careful and always practice safe listening.
Follow all instructions and heed all warnings.
SAVE THESE INSTRUCTIONS!
Official distributor of NUX – LUTHER SPb LLC www.LUTNER.ru
Pedal Description
The NUX DRIVE CORE DELUXE MKII (Wasabi Drive) model is a combined overdrive pedal with eight different effects. The rotary knob allows you to achieve your favorite sound, from the legendary Texas Blues to Nashville Overdrive.
TS808
Tube Screamer (JRC4558 version), one of the world's most famous overdrive effects, offers a smooth and velvety overdrive sound. This mode can be used with a clean or overdriven amplifier to push its sound to the limit.
TS-9
Tube Screamer (TA75558 version), the second generation Tube Screamer pedal, released in the early 80s. Since its re-release in 1992, it is arguably the most famous overdrive pedal in the world.
SSD
Based on the NUX "STEEL SINGER" DRIVE pedal. This is an overdrive pedal with the tonal characteristics of a famous Californian amplifier.
R.Dirt
Based on the Red Dirt overdrive, which provides greater clarity than the original Tube Screamer.
OD-1
The OD-1 is a classic overdrive effect, created in 1977, which set the industry standard for tube-like guitar overdrive in a compact pedal. This effect is widely known for its unique asymmetrical clipping circuit, which, like a tube amplifier, can provide a warm and smooth overdrive sound.
Dist+
The Distortion+ mode is versatile, ranging from gritty bluesy overdrive to powerful and complex 80s rock distortion. This mode bridges the gap between overdrive and fuzz.
ODR-1
The natural overdrive of the ODR-1 pedal, developed in Germany. Positioned between the Tube Screamer and Klon, the ODR-1 mode creates a versatile yet unique overdrive sound coloration. This sound is very popular in Nashville.
NUX MOD
A modification of the ODR-1 with a Bass Cut function, which helps to soften the sound in the low-frequency range.
* All brands and model names mentioned on this page are trademarks of their respective owners, who are in no way affiliated with or subsidiaries of NUX Effects and Cherub Technology Co.
Controls
The NUX DRIVE CORE DELUXE MKII features several controls for shaping your guitar tone:
- LEVEL Knob: Adjusts the output signal level.
- TONE Knob: Adjusts the treble level. (Note: Tone function is inactive for OD1 and Dist+.)
- DRIVE Knob: Adjusts the gain level.
- DRIVE TYPE Knob: Turn to select the desired effect mode. High-quality analog circuits with digital control are used for quiet switching. Modes include TS808, TS-9, SSD, R.Dirt, OD1, Dist+, ODR, NUX MOD.
- POST BOOST Knob: Provides a 1.7 – 7 dB boost at 600 Hz.
- FOOTSWITCH & FS INDICATOR:
- Press the footswitch once to engage (green indicator) or disengage (indicator off) the effect.
- Press and hold the footswitch to engage the Post Boost function (indicator will change from green to red).
- DC 9V Jack: For connecting a 9V DC power adapter (center negative).
- IN Jack: Input jack for connecting a guitar. Input impedance: 500 kOhm.
- OUT Jack: Output jack for connecting an amplifier. Output impedance: 820 Ohm.
Connections
To set up your pedal:
- Connect a 9V DC power adapter (center negative, adapter not included) to the DC 9V jack.
- Connect your guitar to the DRIVE CORE DELUXE MKII's IN jack.
- Connect the pedal's OUT jack to your guitar amplifier.
Diagram Description: A visual representation shows a guitar connected to the pedal's input, the pedal's output connected to an amplifier, and a 9V power adapter plugged into the pedal.
Features
- Fully analog circuits with digital rotary switch.
- True bypass.
- Eight famous overdrive circuits in one pedal.
- Hold the footswitch to engage/disengage the Post Boost function.
Technical Specifications
- Input Impedance: 500 kOhm
- Output Impedance: 800 Ohm
- Power: 9V DC (center negative, adapter not included)
- Current Consumption: 35 mA
- Dimensions: 122 mm (L) x 72 mm (W) x 47 mm (H)
- Weight: 270 g
*Technical specifications are subject to change without prior notice.
Accessories
- User Manual
- Warranty Card
- NUX Sticker
Regulatory Information
WARNING
To prevent fire or electric shock, keep this unit away from rain or moisture.
Federal Communications Commission (FCC) Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Note: This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
© Cherub Technology Co., Ltd. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Cherub Technology Co., Ltd.
