Wireless Water Timer

Device Introduction

The Sub-GHz Gateway allows smartphone access to the RF Water Timers from anywhere anytime with internet access and the Tuya Smart APP or Smart Life APP.

The system setup involves a Router connecting via WIFI to the Sub-GHz Gateway, which then communicates via RF (Radio Frequency) with the RF Water Timer.

Download the App

1. Search in App Store / Google Play or scan the QR code of Tuya Smart / Smart Life (either of them is acceptable).

[QR Code for Tuya Smart] [QR Code for Smart Life]

2. Register an account in the app.

Sub-GHz Gateway

Indicators:

• RF Indicator:
  ? (flashing): Add RF devices
  ? (solid): In working mode
• WIFI Indicator:
  ? (flashing): In pairing mode
  ? (solid): Offline, lost internet connection
  ⚪ (or text): Connected internet

Gateway Button:

• Hold 5 seconds: Reset the gateway
• Press 1 second: Add RF devices

The Sub-GHz Gateway has four main parts:

1. RF indicator
2. WIFI indicator
3. Gateway Button
4. Plug

Specifications/Features:

• ? WiFi 2.4 GHz
• ? Power: 110-240V AC
• ? Suitable for Indoor use
• ☔ Keep Dry
• ?️ Operating Temperature: -10°C to 55°C

RF Water Timer

Key components of the RF Water Timer:

1. Water Inlet: 3/4" Internal Thread, with built-in filter ?
2. Light: Indicator light ?
3. Button: Reset Button / Manual Button ?
4. Water outlet: 3/4" External Thread
5. Battery Compartment: Requires 2 x 1.5V AA alkaline batteries ?

Specifications/Features:

• ? Power: 2 x 1.5V AA Alkaline Batteries
• ? Water Pressure: Requires tap water pressure (0.05 - 0.8 Mpa)
• ?️ Operating Temperature: 3°C - 45°C
• ? Suitable for Outdoor use
• ? Range: Up to 500m without obstacles

Add the Sub-GHz Gateway to App

1. Plug the Sub-GHz Gateway into a power source near your WIFI router (2.4 GHz only). Closer proximity is better.
2. The RF indicator light turns blue, and the WIFI indicator light flashes orange slowly, indicating the Gateway is in pairing mode, waiting for network connection.
3. Turn on your phone's Bluetooth and open the Tuya Smart / Smart Life app.
4. Follow the app's prompts to complete the Sub-GHz Gateway setup process.
5. Troubleshooting: If connection times out or fails, hold the gateway button for 5 seconds until the WIFI light blinks slowly again. Also, double-check your WiFi router password, as an incorrect password will cause the connection to fail.
6. Once successfully connected, the Sub-GHz Gateway will appear on the app's Home screen and then navigate to the Sub-GHz Gateway screen.
7. The RF indicator light will then flash slowly, indicating it is ready to pair RF devices.
8. Turn off your phone's Bluetooth.

Add the RF Water Timer to Gateway

1. Install 2 x 1.5V AA alkaline batteries into the RF Water Timer.
2. The timer's light will turn white and flash quickly, indicating it is waiting for network connection.
3. Open the Tuya Smart / Smart Life app, navigate to the Home screen, and tap on "Sub-GHz Gateway".
4. While on the Sub-GHz Gateway screen, the RF Water Timer should be automatically added within seconds. Alternatively, follow the app's prompts for the Water Timer pairing process.
5. Pairing Checks: Ensure the Sub-GHz Gateway's RF indicator is flashing blue slowly. If not, press the gateway button for 1 second. Ensure the RF Water Timer's light is flashing white quickly. If not, hold the timer's button for 5 seconds.
6. After successful pairing, the RF Water Timer will appear on the Home screen device list and the Sub-GHz Gateway screen.

Operating Instructions in App

Tap "RF Water Timer" on the Home screen device list or Sub-GHz Gateway screen to enter the RF Water Timer screen.

Main Screen Features:

• 1. Information/Settings: Tap "[Info Icon]" for additional information about the RF Water Timer.
• 2. RF Signal: If the signal is weak, move the timer closer to the gateway.
• 3. Battery Power: If low, replace with new alkaline batteries.
• 4. Weather Delay: Tap "☁️ Weather Delay" to access settings. You can set delays from 1 to 7 days or enable "Smart Weather". Tap the back arrow "◀️" to return.
• 5. Image Display Area: Shows relevant imagery.
• 6. Next Watering Notification: Displays upcoming watering schedules.
• 7. Open / Close Button: Manually start or stop watering.
• 8. Manual Watering:
  1. Tap "? Manual watering" to set the duration.
  2. Use the wheels to select the desired hour, minute, and second.
  3. Tap "✔️ Save" to confirm your settings.
  4. Tap the back arrow "◀️" to return to the previous screen.
  5. Tap the play button "▶️" to start manual watering.

  Manual watering can be stopped or started at any time using the Open/Close button.

• 9. Schedule:
  1. Tap "?️ Schedule" and then "➕ Add" to create a new watering plan.
  2. Set the start time, runtime, and choose between loop or single time watering.
  3. Tap "✔️ Save" to confirm.
  4. Tap the back arrow "◀️" to return to the "Add" page. A green on-off button indicates the plan has been set successfully.

  Up to 5 watering plans can be added.

• 10. Spray:
  1. Tap "? Spray" to configure spray settings.
  2. Set the start time, end time, spray duration, interval duration, and loop/single time.
  3. Tap "✅ Enable" to activate the spray function (button turns green).
  4. Tap the back arrow "◀️" to return.
• 11. Record: View watering records for the past 7 days.

Precautions

1. Due to potential communication delays, manually scroll down in the app to refresh data updates.
2. App interface designs may vary with updates; always follow instructions in the current app version.
3. Upgrade the app version as prompted and regularly clear the cache to ensure optimal device performance.
4. When using the RF Water Timer, ensure the water inlet is equipped with a filter ? to prevent impurities from blocking the valve, which could cause switch failure or water leakage. Clean or replace the filter regularly.
5. The timer does not generate pressure; it requires adequate tap water pressure or a pressurized water source to function correctly.
6. The timer's working temperature is 3°C - 45°C. If temperatures drop below freezing or the timer is unused for an extended period, remove it, take out the batteries ?, empty any water from the valve tube, and store it in a dry indoor place.

Safety Icons:

• ? [Hand Washing]
• [Device Diagram]
• ?️ [Tools]
• ?‍?‍? [People/Family]

After-Sales Service

• A 1-year warranty is included for device performance failures after purchase (excluding accessories).
• The warranty does not cover damages caused by unauthorized maintenance, misuse, collision, negligence, abuse, accidents, modifications, incorrect use of the device or its parts, or force majeure events.
• For quality-related issues, contact local distributors or authorized repair stations with your device invoice and warranty card.

Warranty Card

Customer: ____________________ Tel.: ____________________

Contact Add: ____________________________________________________

Device Name: ____________________ Model: ____________________

Purchase Add: ____________________ Order Date: ____________________

Declaration on Hazardous Substances in Electronic Products

⚪: Indicates the concentration of the hazardous substance is below the limit requirement of GB / T26572 standard.

X: Indicates the concentration of the hazardous substance is above the limit requirement of GB / T26572 standard.

This form is compiled in accordance with the requirements of SJ / T11364.

FCC Compliance:

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.

Manufacturer Information

Manufacturer: Ningbo Hanci Electrical Co., LTD.

Address: No.127 -129, Dexing Road, Ninghai County, Ningbo City, China. 315600

Made in China

Certifications: [10] [UKCA] [CE] [FC] ♻️ ®️ [WEEE Symbol]