Fiilex T360/T365 User Guide: Setup, Operation, and Settings

Safety Instructions

? DO NOT look into the light source. Be cautious of the high-intensity beam.
? DO NOT disassemble T360/T365. This will void the warranty.
? DO NOT install T360/T365 in damp or wet locations.
? DO NOT obstruct the fixture's air vents.
? DO NOT cut any track sections.
? DO NOT install any part of the track system (use with Eutrac 233/225 track system only) less than 5 feet from the floor.
? DO NOT install T360/T365 less than 6 inches from any curtain or combustible materials.
? DO NOT energize anything other than T360/T365 on the track.
? DO NOT connect any power tools, extension cords and appliances to the track. This is to avoid a risk of fire and electric shock.
? DO NOT connect a track to more than one branch circuit unless the track is constructed to be used with more than one branch circuit. This is to prevent a dangerous overload of the neutral and a risk of fire.
Disconnect electrical power before changing the track layout.
T360/T365 should be replaced when its light source (not replaceable) reaches its end of life.
Please seek installation assistance from qualified electricians if needed.
Only use Fiilex approved power supply and accessories. Failure to do so may damage the fixture.

Parts Diagram

A diagram illustrates the Fiilex T360/T365 lighting fixture, showing its various components. The diagram includes a numbered key for identification:

1. Eutrac Multi-Adapter
2. Power Module Box
3. Side Vents
4. Barndoor Lock
5. Yoke Knob
6. Magnetic Accessory Lock
7. Barndoor Slot
8. 5" Fresnel Zoom Lens (T365 only)
9. Lens Tighten Knobs (T365 only)
10. Barndoor Lock (T365 only)
11. Barndoor Slot (T365 only)
12. Barndoor Lock Release
13. Yoke
14. CCT / HUE Knob
15. On / Off Button
16. OLED Display
17. Intensity / DMX Knob
18. Rear Vents

Indicator Light

On/Off Button (15)	Mode	Description
Red Indicator	Manual Control	Fixture is off and receiving power. Light settings can be adjusted via manual control knobs.
Green Indicator	Manual Control	Fixture is on.
Orange Indicator	DMX Control	Fixture is receiving DMX control signal. Manual control knobs are disabled while DMX is active.

Fixture Settings

Setting	Adjustment
Intensity	Turn the Intensity Knob (17) to adjust brightness.
CCT	Turn the CCT Knob (14) to adjust color temperature.
HUE (Magenta/Green)	Double click the HUE Knob (14) to access HUE setting.
DMX Control	Double click the DMX Knob (17) to set a DMX address (Range: 1 - 510). When a DMX address is selected, the fixture will automatically assign the next addresses in the following order: 1. Intensity 2. CCT 3. HUE

	Fiilex P3 COLOR User Guide: Operation, Safety, and Features Comprehensive user guide for the Fiilex P3 COLOR portable LED light. Covers safety instructions, parts identification, fixture operation modes, control settings, and system information for professional lighting applications.
	Fiilex Q5 COLOR User Guide Comprehensive user guide for the Fiilex Q5 COLOR LED light, covering safety instructions, parts identification, fixture operation, settings, and connectivity.
	Fiilex P180S LED Light User Manual - Operation, Specifications, and Warranty Get detailed instructions for the Fiilex P180S LED light. This user manual covers setup, basic operation, parts diagram, specifications, safety precautions, and warranty information for the FLXP180S model.
	Fiilex Q3 COLOR User Manual Comprehensive user manual for the Fiilex Q3 COLOR 90W LED Fresnel Light, detailing specifications, installation, operation, maintenance, and DMX control for professional lighting applications.
	Fiilex Matrix COLOR: Cinematic Quad-Source LED Punch Light Specifications Detailed technical specifications, features, and photometric data for the Fiilex Matrix COLOR, a 320W Quad-Source LED punch light designed for professional cinematic lighting applications, featuring Dense Matrix LED technology, high CRI, and versatile beam control.
	Fiilex MOTOQ3 Cinematic LED Fresnel Light - Product Overview and Specifications Detailed information on the Fiilex MOTOQ3, a motorized pan and tilt cinematic LED Fresnel light featuring high-CRI output, advanced color modes, wireless control, and robust construction. Includes specifications and photometric data.
	Fiilex Matrix Color User Guide User guide for the Fiilex Matrix Color LED lighting fixture, covering safety instructions, parts diagram, fixture operation, controls, settings, and connectivity.
	Fiilex TOX End Feed Wiring Guide - Installation and DMX Setup Comprehensive wiring guide for the Fiilex TOX End Feed component, covering power connection, DMX setup, and safety instructions for track lighting systems. Includes pin-out details and DMX cabling standards.

Fiilex T360 / T365 User Guide

Safety Instructions

Parts Diagram

Indicator Light

Fixture Settings

Related Documents