Fiilex MOTOQ3 Cinematic LED Fresnel Light
The MOTOQ3 adds motorized pan and tilt to the Fiilex Q3 COLOR-LR. With 190 degrees of tilt, and 540 degrees of panning, the MOTOQ3 allows for complete freedom for all adjustments. Built-in LumenRadio with CRMX protocol allows the MOTOQ3 to seamlessly integrate with other Fiilex fixtures – bringing a whole new dimension to Fiilex's line of full-color cinematic LED fresnels.
Features
- High-CRI white light output (2000-10000K)
- 8 and 16-bit color modes: CCTRGBW, CCTHSI, CIExy, etc.
- IP-X5 Rating (water resistant)
- DMX control motor auto zero calibration.
- Tilt +/- 95° (190° total), Pan +/- 270° (540° total)
- Wireless control via integrated LumenRadio
- Hardline DMX via XLR-5 adapter
- Smooth and Sharp dimming modes
- DMX-controllable fan modes: Full, Auto, Silent, Off
- Optional truss clamp mounting and TOX track mounting
Beam Profile
The beam profile graph illustrates the relative intensity of light output against the relative distance from the center. It displays three distinct curves: 'w/o Fresnel', 'w/ Fresnel - Flood', and 'w/ Fresnel - Spot'. The 'w/o Fresnel' curve shows a sharp, narrow beam. The 'w/ Fresnel - Flood' curve indicates a wider, softer beam spread. The 'w/ Fresnel - Spot' curve is narrower than the flood setting but broader than the beam without the Fresnel attachment. The horizontal axis represents relative distance from the center, ranging from -80 to 80, and the vertical axis shows relative intensity, from 0x to 4x.
The fixture dimensions are approximately 10.9 inches (height) x 8.7 inches (width) x 6.7 inches (depth).
Specifications
| Specification | Value |
|---|---|
| Fresnel Diameter | 5" |
| Beam Angle | 15°-45° with fresnel (55° without fresnel) |
| CCT Range | 2000-10000K continuous tuning + magenta/green shift |
| CRI / TLCI | 95 / 90 typical |
| Control Modes | Motor+CCT, Motor + HSI, Motor + RGBW, Motor + CCTRGBW, and more |
| Dimming | 100-0% flicker free |
| Dimming Modes / Curve | Smooth, Sharp / Linear, Gamma |
| Light Engine | DiCon Dense Matrix LED |
| Power Consumption | 100W max AC |
| BTUs/hour | 341 (BTUs/hour) max |
| DC Input | 14-30V DC |
| AC Input | 100-240V AC, 50 ~ 60Hz |
| DMX / RDM Port | XLR-5 in and out |
| Wireless Control | Integrated LumenRadio CRMX Timo Two |
| USB Power Output | 5V/1A power / FW Update |
| Weight | 9.2 lbs / 4.2kg (without CLAMP) |
| Size (L x W x H) | 6.7" x 8.7" x 10.9" / 17.0cm x 22.1cm x 27.7cm |
| Pan / Tilt | Pan +/- 270° (540° total), Tilt +/- 95° (190° total) |
| Mount | Truss Clamp / TOX track adapter |
| IP Rating | IP-X5 (water-resistant) |
| Thermal Design | Controllable fan (OFF / SILENT / AUTO / FULL) |
| Operating Temperature | 32-104°F / 0-40°C |
| Approved Regulatory Standards | FCC, CE, UKCA, RoHS, WEEE |
Photometric Data
The photometric data tables present light output measurements for the MOTOQ3 at 3200K and 5600K. For each color temperature, readings for both Flood (45° beam angle) and Spot (15° beam angle) are provided at distances of 2.0m (6.6ft), 3.0m (10.0ft), and 7.0m (23.0ft). At 3200K, the Flood setting yields 150 Lux (14 FC) at 2.0m, 65 Lux (approx. 6.5 FC) at 3.0m, and 13 Lux (approx. 1.2 FC) at 7.0m. The Spot setting at 3200K provides 8371 Lux (778 FC) at 2.0m, 3621 Lux (336 FC) at 3.0m, and 670 Lux (62 FC) at 7.0m. At 5600K, the Flood setting outputs 149 Lux (14 FC) at 2.0m, 69 Lux (approx. 6.5 FC) at 3.0m, and 14 Lux (approx. 1.3 FC) at 7.0m. The Spot setting at 5600K delivers 8312 Lux (772 FC) at 2.0m, 3770 Lux (350 FC) at 3.0m, and 697 Lux (65 FC) at 7.0m.
