Fiilex Matrix Color User Guide

Safety Instructions

DO NOT look into the light source. Be cautious of the high-intensity beam.
DO NOT disassemble Matrix Color. This will void the warranty.
DO NOT install Matrix Color in damp or wet locations.
DO NOT obstruct the fixture's air vents.
Use safety cable (not included) when rigging Matrix Color overhead.
Only use Fiilex approved power supply and accessories. Failure to do so may damage the fixture.
Shields, lenses or ultraviolet screens shall be changed if they have become visibly damaged to such an extent that their effectiveness is impaired, for example by cracks or deep scratches.
The lamp shall be changed if it has become damaged or thermally deformed.
The luminaire is intended for professional use only.

Parts Diagram

Diagram Description:

The fixture is shown with numbered components. The following list details each part:

Component List:

1. Handle
2. Top Latch
3. Yoke Bolt
4. Tilt Lock Lever
5. Yoke
6. Baby/Junior Pin Receiver
7. Mount Tightening Knob
8. Vent Holes
9. Bottom Latch
10. Power Supply Unit (PSU)
11. Fan Intake Vent
12. Intensity Control Knob
13. CCT/HUE Knob
14. GN/SAT Knob
15. USB Type-A Port (5V/1A Power)
16. Dual Locking V-Mount
17. DMX Output (XLR-Male 5-pin)
18. OLED Display
19. Navigation Pad
20. ON/OFF Switch
21. USB Type-C Port (For updating firmware)
22. LAN Port
23. DMX Output (XLR-Female 5-pin)
24. DC Input Port

Fixture Operation

Mode Selection

Use the [Navigation Pad] to enter the MODES menu, then navigate to select the desired mode.

Fixture Control

1. Manual / Local:

Use the Intensity Control Knob or the [Navigation Pad] to control parameters. For CCT and HSI modes, use either the CCT/HUE Knob and GN/SAT Knob or the [Navigation Pad].

2. DMX / RDM / Ethernet (ArtNet / sACN):

The display shows DMX connection status: NO DMX or DMX OK.

Settings

Use the [Navigation Pad] to enter and edit SETTINGS. Navigate to the right to access additional settings.

Fan Speed Options

Option	Description
Off	The fan is completely off. (Operation time is limited.)
Variable	The fan speed varies based on light intensity.
Silent	The fan operates at reduced speed.
Full Speed	The fan operates at full speed.

Dimming Options

Option	Description
Sharp	Best for flash and strobe effects.
Smooth	Best for gradual fades.

Ethernet

Modify ArtNet and sACN settings of the fixture.

Info

View current fixture firmware versions and fixture temperature.

	Fiilex P3 COLOR User Guide: Operation, Safety, and Features Comprehensive user guide for the Fiilex P3 COLOR portable LED light. Covers safety instructions, parts identification, fixture operation modes, control settings, and system information for professional lighting applications.
	Fiilex Q3 COLOR User Manual Comprehensive user manual for the Fiilex Q3 COLOR 90W LED Fresnel Light, detailing specifications, installation, operation, maintenance, and DMX control for professional lighting applications.
	Fiilex Matrix COLOR: Cinematic Quad-Source LED Punch Light Specifications Detailed technical specifications, features, and photometric data for the Fiilex Matrix COLOR, a 320W Quad-Source LED punch light designed for professional cinematic lighting applications, featuring Dense Matrix LED technology, high CRI, and versatile beam control.
	Fiilex Q5 COLOR User Guide Comprehensive user guide for the Fiilex Q5 COLOR LED light, covering safety instructions, parts identification, fixture operation, settings, and connectivity.
	Fiilex T360/T365 User Guide: Setup, Operation, and Settings Comprehensive user guide for the Fiilex T360/T365 LED lighting fixture. Learn about safety instructions, parts identification, indicator light meanings, and fixture settings for brightness, color temperature, hue, and DMX control.
	Fiilex P180S LED Light User Manual - Operation, Specifications, and Warranty Get detailed instructions for the Fiilex P180S LED light. This user manual covers setup, basic operation, parts diagram, specifications, safety precautions, and warranty information for the FLXP180S model.
	Fiilex C360/C365 User Guide User guide for the Fiilex C360/C365 lighting fixture, covering safety instructions, parts diagram, indicator light functions, and fixture settings for intensity, CCT, HUE, and DMX control.
	Fiilex TOX End Feed Wiring Guide - Installation and DMX Setup Comprehensive wiring guide for the Fiilex TOX End Feed component, covering power connection, DMX setup, and safety instructions for track lighting systems. Includes pin-out details and DMX cabling standards.