ROSENTORP Extendable Table Assembly Instructions

This document provides detailed instructions for assembling the IKEA ROSENTORP extendable table.

General Assembly Information

Before you begin, please read these instructions carefully. Ensure you have all parts and hardware listed. It is recommended to assemble the table on a soft surface, such as a rug or the packaging material, to prevent scratches.

Tools Required:

Phillips head screwdriver [screwdriver]
Flat head screwdriver [screwdriver]

Important Notes:

Do not use power tools for assembly, as this may damage the parts. [forbidden]
If you encounter any issues or are missing parts, please contact IKEA customer support. [information]

Parts and Hardware List

Identify all components before starting assembly:

Hardware:

9x Screw (Part No. 154409)
4x Dowel (Part No. 107271)
20x Dowel (Part No. 100712)
10x Bolt (Part No. 154954)
4x Bolt (Part No. 156685)
8x Washer (Part No. 118331)
8x Nut (Part No. 113434)
16x Screw (Part No. 100843)
4x Connecting piece (Part No. 120202)
4x Threaded rod (Part No. 100041)
4x Threaded rod (Part No. 100038)
4x Connector (Part No. 110912)
1x Bracket (Part No. 122483)
1x Part (Part No. 10035981)
1x Part (Part No. 10062668)
4x Screw (Part No. 100325)
4x Screw (Part No. 109067)
2x Screw (Part No. 109021)
2x Screw (Part No. 10082399)
2x Screw (Part No. 10082205)
2x Screw (Part No. 10064763)
8x Dowel (Part No. 101350)
2x Part (Part No. 122485)

Table Components:

The main table components are illustrated in the diagrams, showing the tabletop, frame pieces, and legs.

Assembly Steps

Step 1: Prepare the Frame

Lay out the main frame components on your protected surface. Attach the side frame pieces to the central support structure using the provided hardware. Ensure all connections are secure.

Diagram Description: Shows the central frame structure and two side pieces being laid out. Arrows indicate where they connect.

Step 2: Attach Dowels

Insert 8 dowels (Part No. 101350) into the pre-drilled holes on the frame components. Gently tap them in if necessary.

Diagram Description: Close-up view showing dowels being inserted into holes on the frame.

Step 3: Connect Frame Sections

Join the frame sections together. Use 4x washers (Part No. 118331) and 4x bolts (Part No. 154409) to secure the frame. A close-up shows a bolt being screwed into a threaded insert with a washer.

Diagram Description: Shows two frame sections being joined. A close-up illustrates inserting a bolt with a washer into a pre-drilled hole and tightening it.

Step 4: Secure Frame Further

Use 2x bolts (Part No. 156685) to further secure the frame. The diagram shows a bolt being inserted and tightened.

Diagram Description: Close-up view showing a bolt being inserted and tightened into the frame.

Step 5: Attach Support Brackets

Attach the support brackets (Part No. 122483) to the underside of the frame using 4x screws (Part No. 100325) and 2x screws (Part No. 109067). The diagram shows the bracket being positioned and screwed in. It also shows a "do not" symbol for incorrect screw usage.

Diagram Description: Shows a bracket being attached to the frame with screws. Incorrect screw usage is crossed out.

Step 6: Connect More Frame Pieces

Connect additional frame pieces. Use 4x screws (Part No. 100325) and 2x screws (Part No. 109021) to attach part 10082399 to the frame.

Diagram Description: Shows more frame pieces being connected, with arrows indicating the direction of attachment.

Step 7: Attach Locking Mechanism

Attach the locking mechanism components (Part No. 10062668) to the frame using 1x screw (Part No. 10082205) and 1x screw (Part No. 10064763). The diagram shows the mechanism being assembled onto the frame.

Diagram Description: Shows the locking mechanism being assembled onto the frame with specific screws.

Step 8: Secure Locking Mechanism

Secure the locking mechanism further. Use 2x screws (Part No. 100325) and 2x screws (Part No. 109021) to attach the mechanism to the frame.

Diagram Description: Shows the locking mechanism being secured to the frame with additional screws.

Step 9: Prepare Tabletop Supports

Take the two long tabletop support pieces. Insert 4x dowels (Part No. 101350) into the pre-drilled holes on these pieces.

Diagram Description: Shows two long wooden pieces (tabletop supports) with dowels being inserted into them.

Step 10: Attach Supports to Frame

Attach these prepared tabletop supports to the main frame. Use 10x bolts (Part No. 154954) to secure them. The diagram shows bolts being screwed into the supports and frame.

Diagram Description: Shows the tabletop supports being attached to the main frame using bolts.

Step 11: Connect Tabletop Rails

Attach the tabletop extension rails to the frame. Use 2x bolts (Part No. 154409) for this step. The diagram shows the rails being attached.

Diagram Description: Shows the extension rails being attached to the frame with bolts.

Step 12: Secure Tabletop Rails

Secure the tabletop extension rails further. Use 10x nuts (Part No. 113434) to fasten them to the frame. The diagram shows nuts being tightened onto bolts.

Diagram Description: Close-up view showing nuts being tightened onto bolts to secure the extension rails.

Step 13: Insert Extension Mechanism

Slide the extension mechanism components into the rails attached to the frame. An arrow indicates the direction of insertion.

Diagram Description: Shows the extension mechanism sliding into the rails.

Step 14: Attach Extension Slides

Attach the extension slides to the frame. Use 2x screws (Part No. 100325) and 2x screws (Part No. 109021) with bracket 122483. The diagram shows the slides being screwed into place.

Diagram Description: Shows extension slides being attached to the frame with screws.

Step 15: Attach Additional Supports

Attach additional support pieces to the frame. Use 2x bolts (Part No. 154409) to secure them.

Diagram Description: Shows more support pieces being attached to the frame with bolts.

Step 16: Attach Locking Components

Attach the locking components (Part No. 10082205 and 10064763) to the frame. Use 1x screw (Part No. 100325) and 1x screw (Part No. 109021). The diagram shows the components being screwed in, with incorrect screw usage crossed out.

Diagram Description: Shows locking components being attached to the frame with specific screws. Incorrect screw usage is crossed out.

Step 17: Secure Locking Mechanism

The diagram shows a locking mechanism being engaged, indicated by a lock symbol [lock] and the word "Click!". This step likely involves securing the extension mechanism.

Diagram Description: Shows a close-up of the locking mechanism being engaged, resulting in a "Click!".

Step 18: Attach Leg Connectors

Attach the leg connectors to the frame. Use 2x bolts (Part No. 156685) to secure them.

Diagram Description: Shows leg connectors being attached to the frame with bolts.

Step 19: Attach Leg Brackets

Attach the leg brackets to the frame. Use 2x screws (Part No. 100325) and 2x screws (Part No. 109021) with bracket 122483. The diagram shows the brackets being screwed into place.

Diagram Description: Shows leg brackets being attached to the frame with screws.

Step 20: Attach Tabletop

Place the tabletop onto the assembled frame. Secure it using 3x bolts (Part No. 154409). The diagram shows the tabletop being placed and then secured with bolts.

Diagram Description: Shows the tabletop being placed onto the frame and then secured with bolts.

Step 21: Prepare Legs

Prepare the table legs. Insert threaded rods (Part No. 100041 and 100038) into the legs. Use 2x connectors (Part No. 110912) for each leg. The diagram shows threaded rods being inserted into the legs and secured with connectors.

Diagram Description: Shows threaded rods being inserted into the table legs and secured with connectors.

Step 22: Attach Legs to Frame

Attach the prepared legs to the frame. Use 8x bolts (Part No. 100843), 8x nuts (Part No. 100712), and 4x connecting pieces (Part No. 120202) in total for this step. The diagram shows the legs being attached.

Diagram Description: Shows the table legs being attached to the frame using bolts, nuts, and connecting pieces.

Step 23: Secure Legs

Secure the legs to the frame. Insert 4x threaded rods (Part No. 100041) into the legs and secure them with 4x connectors (Part No. 110912). The diagram shows the process, including a "do not" symbol [forbidden] for incorrect assembly.

Diagram Description: Shows the process of securing legs to the frame with threaded rods and connectors. An incorrect method is shown crossed out.

Step 24: Attach Final Leg Brackets

Attach the final leg brackets to the frame. Use 8x bolts (Part No. 100843), 8x nuts (Part No. 100712), and 4x connecting pieces (Part No. 120202) in total for this step. The diagram shows the legs being attached.

Diagram Description: Shows the final attachment of legs to the frame using brackets, bolts, nuts, and connecting pieces.

Step 25: Final Leg Attachment

Insert 4x dowels (Part No. 107271) into the top of the legs. Then, attach the legs to the tabletop frame. The diagram shows the dowels being inserted and the legs being attached.

Diagram Description: Shows dowels being inserted into the legs, and then the legs being attached to the tabletop frame.

Step 26: Position the Table

With assistance, carefully turn the table upright [arrow-up]. The diagram shows two people lifting and turning the table.

Diagram Description: Two people are shown carefully lifting and turning the assembled table upright.

Step 27: Attach Tabletop Mechanism

Attach the tabletop extension mechanism components to the underside of the tabletop. Use 1x screw (Part No. 10082205) and 1x screw (Part No. 10064763) with part 10082399. The diagram shows the mechanism being screwed into the tabletop.

Diagram Description: Shows the extension mechanism being attached to the underside of the tabletop with screws.

Step 28: Secure Tabletop Mechanism

Secure the tabletop extension mechanism. Use 2x screws (Part No. 109021) and 2x screws (Part No. 10082399). The diagram shows the mechanism being attached to the tabletop.

Diagram Description: Shows the extension mechanism being secured to the tabletop with additional screws.

Step 29: Extend the Table

To extend the table, unlock [unlock] the mechanism and pull the tabletop sections apart [arrow-right]. The diagram shows the extension process.

Diagram Description: Shows the table being extended by unlocking and pulling the tabletop sections apart.

Step 30: Attach Extension Leaf Supports

Attach the supports for the extension leaf. The diagram shows these parts being attached.

Diagram Description: Shows the supports for the extension leaf being attached to the table frame.

Step 31: Lock the Tabletop

Once extended, lock the tabletop sections into place. The diagram shows the locking mechanism being engaged, indicated by a lock symbol [lock] and the word "Click!".

Diagram Description: Shows the locking mechanism being engaged to secure the extended tabletop, with a "Click!" sound indicated.

Step 32: Final Check

Ensure all screws and bolts are tightened. The table is now ready for use. The diagram shows the fully assembled table.

Diagram Description: Shows the fully assembled ROSENTORP extendable table.

	MALM Headboard Assembly Instructions - IKEA Step-by-step assembly guide for the IKEA MALM headboard. Includes safety warnings for wall mounting, a complete parts list, and detailed instructions for putting together and securely attaching your furniture.
	MALM Headboard Assembly Instructions (White, 140 cm) Step-by-step assembly guide for the IKEA MALM headboard, model 902.899.40, in white. Includes required tools, parts list, and safety instructions for wall mounting.
	GRILLSKÄR Gas Barbecue User Manual and Safety Guide Comprehensive guide for the IKEA GRILLSKÄR gas barbecue, covering safe operation, assembly, maintenance, and troubleshooting for outdoor cooking.
	STRANDAD Table Lamp Assembly Instructions Detailed assembly instructions for the IKEA STRANDAD table lamp, including safety warnings and step-by-step guidance for putting the lamp together.
	TARSELE Extendable Table Assembly Instructions Comprehensive guide for assembling the IKEA TARSELE Extendable Table, detailing parts, tools, and step-by-step instructions for a secure and functional dining setup.
	VÄSMAN Extendable Outdoor Table Assembly Instructions Detailed assembly guide for the IKEA VÄSMAN extendable outdoor table, including a parts list and step-by-step instructions for safe and correct setup.
	GAPERHULT Extendable Table Assembly Instructions Detailed assembly guide for the IKEA GAPERHULT extendable table, covering all steps from parts identification to final assembly and extension mechanisms.
	MELLANSEL Extendable Table Assembly Instructions \| IKEA Step-by-step guide for assembling and extending the IKEA MELLANSEL extendable table. Learn how to insert and secure extension leaves for versatile dining.