MARS IE4M Micro-Tower PC Case
Product Overview and Installation Guide
Case Layout and Parts Identification
The MARS IE4M features a well-organized layout for PC components. Key parts are identified as follows:
- Front Panel
- IO Port Module
- Right Side Panel
- Left Side Panel
- PCIe Slots
- Power Supply Unit Mounting Hole
- Rear Fan
- Motherboard Placement Area
- Motherboard Mounting Holes
- Chassis Pedestals
Safety Information
Adhering to safety guidelines is crucial for a secure and efficient build:
- General Safety: Place the case on a stable surface, keep away from water/moisture, and do not obstruct ventilation openings.
- Electrical Safety: Disconnect power before component installation. Ground yourself to prevent static discharge. Use compatible power supplies and secure connections.
- Handling Precautions: Handle with care during transport. Use appropriate tools and do not force components.
- Fire Hazard Warnings: Ensure proper ventilation to prevent overheating. Avoid overloading circuits and keep flammable materials away.
- Child Safety: Keep the case and components out of reach of children.
- Cleaning and Maintenance: Unplug before cleaning. Use a dry, soft cloth. Clean ventilation openings periodically.
- Installation Safety: Ensure all components are installed correctly and securely. Double-check connections.
- Disposal Instructions: Dispose of according to local electronic waste regulations.
Package Contents
- GAMDIAS MARS E4M Gaming Case
- Chassis Protection: Styrofoam
Installation Guide
Follow these steps for a successful build:
Motherboard Installation
Step 01: Place the motherboard standoffs in the appropriate positions corresponding to your motherboard size (Micro-ATX, Mini-ITX).
Step 02: Align the motherboard with the installed standoffs and secure it using screws.
Power Supply Unit (PSU) Installation
Step 01: Slide the PSU into the designated bottom compartment of the chassis.
Step 02: Secure the PSU with screws. Connect the necessary power cables to the motherboard and other components.
HDD/SSD Installation
Step 01: Identify the appropriate drive bay within the case for your hard drive (HDD) or solid-state drive (SSD).
Step 02: Secure the drive in the bay using screws or the case's tool-less mounting system.
GPU Installation
Step 01: Identify the PCI-E x16 slot on the motherboard, typically the largest slot closest to the CPU.
Step 02: Remove the corresponding expansion slot cover(s) from the rear of the case.
Step 03: Align the graphics card's connector with the PCI-E slot and gently press down until the card is firmly seated. Secure the card to the case using screws.
Front I/O Cable Connections
Connect the front panel cables to the corresponding headers on the motherboard:
- USB 3.0 header
- HD Audio header
- Power Switch connector
- Reset Switch connector (if applicable)
- HDD LED, Power LED connectors
Cable Management
Step 01: Attach the grouped cables to the case's designated cable management points (e.g., tie-down points, routing channels).
Step 02: Ensure that cables do not obstruct airflow or interfere with components. Use additional zip ties or Velcro straps to secure any loose or excess cables for a tidy build.
Specifications
| Case Type | Micro Tower |
| Motherboard Support | Micro-ATX, Mini-ITX |
| Expansion Slots | 4 |
| Material | SPCC, ABS |
| Product Dimension | 320 x 170 x 360 mm (12.6 x 6.7 x 12.1 inch) |
| Chassis Dimension | 290 x 170 x 350 mm (11.4 x 6.7 x 13.9 inch) |
| Radiator Support | No |
| Fan Support | Rear: 1 x 80mm |
| Motherboard Sync | No |
| Drive Bays | 1 x 2.5" or 1 x 3.5" (Chassis Bottom) |
| Clearance | CPU cooler height limitation: 150mm VGA length limitation: 260mm PSU length limitation: 160mm |
Troubleshooting and Maintenance
- Regularly clean dust filters and fans to maintain optimal airflow.
- Check all internal connections if the system fails to power on.
Warranty and Support Information
Refer to the GAMDIAS website or product documentation for specific warranty periods and customer support contact details.
