GAMDIAS TALOS E3 & E3 WH Mid-Tower PC Case

Quick Installation Guide

Specifications

Series	TG Series
Product Name	TALOS E3 / TALOS E3 WH
Case Type	MID Tower
Dimension (L x W x H)	363 x 210 x 447 mm (14.3 x 8.3 x 17.6 inch)
Chassis Dimension (L x W x H)	330 x 210 x 430 mm (13 x 8.3 x 16.9 inch)
Motherboard Support	ATX, Micro-ATX, Mini-ITX
Expansion Slots	7
Material	SPCC, ABS, Tempered glass
Window	Front, Left
Radiator Support	Top: 240mm Front: 360 mm (HDD cage removal suggested), 280 mm Rear: 120mm
Fan Support	Top: 2 x 120mm Front: 3 x 120mm, 2 x 140mm Rear: 1 x 120mm Bottom: 2 x 120mm
Pre-installed Fans	Front: 2 x 120mm ARGB Fans Rear: 1 x 120mm ARGB Fan
Pre-installed Control BOX	NO
Motherboard Sync	5V 3-Pin Addressable Header
Drive Bays	2 x 3.5" or 1 x 2.5" + 1 x 3.5" (HDD Cage) 2 x 2.5"
Clearance	CPU cooler height limitation: 160mm VGA length limitation: 300mm PSU length limitation: 150mm
I/O Port	USB 3.0 x1, USB 2.0 x2, HD Audio x1, Fan LED Control x1

Exploded View & Parts

The PC case is comprised of the following parts:

0: Chassis Body
1: Tempered Glass Side Pane & Screw
2: Right Side Panel
3: Top Dust Filters
4: Tempered Glass Front Panel
5: I/O Port
6: 120MM ARGB FAN
7: HDD Cage
8: Rubber Foot
9: 120MM ARGB Fan

Accessory

Figure	Parts Name	QTY	Used For
[Screw]	Stand-off 4.75 x 9.5 x 6.5mm	3	Motherboard
[Screw]	Screw #6 x 6 mm	6	PSU
[Screw]	Screw #6 x 5 mm	9	HDD
[Screw]	Screw M3 x 5 mm	18	2.5" HDD/Motherboard/ODD
[Cable Tie]	Cable Tie	5	Cable Management

Side Panel Removal

Follow these steps to remove the side panel:

Remove the side panel.
[Illustration showing side panel removal]

Motherboard Installation

Install the motherboard as follows:

Lay down the chassis.
Install the motherboard in the proper location and secure it with screws.
[Illustration showing motherboard installation]

PSU Installation

Install the Power Supply Unit (PSU):

Place the PSU in the proper location.
[Illustration showing PSU installation]

3.5" & 2.5" HDD Installation

Install 3.5" and 2.5" Hard Disk Drives (HDD) and Solid State Drives (SSD):

For 3.5" HDD: Align the HDD into the mounting holes and screw in.
For 2.5" SSD: Align the SSD into the mounting holes and screw in.
[Illustration showing HDD and SSD installation]

Air Cooling Compatibility

The case supports the following fan configurations:

Location	Fan Size
Top	2 x 120mm
Front	3 x 120mm or 2 x 140mm
Rear	1 x 120mm
Bottom	2 x 120mm

[Illustration showing fan placement options]

Radiator Compatibility

The case supports the following radiator sizes:

Location	Radiator Size
Top	240 mm
Front	360 mm or 280 mm
Rear	120 mm

[Illustration showing radiator placement options]

I/O Ports

The front panel I/O ports include:

1: Power Button
2: Fan LED Control
3: USB 2.0
4: Headphone
5: Mic
6: USB 2.0
7: USB 3.0

Note: Sync With Motherboard: Press and hold the Fan LED Control Button for 3 seconds.

[Illustration of I/O ports with labels]

I/O Connectors

Connectors for the front panel include:

USB 3.0
USB 2.0
HD AUDIO
POWER SW
HDD LED
POWER LED+
POWER LED-
RGB sync via MB

Consult your motherboard's manual for front panel header locations and pin-outs.

	GAMDIAS TALOS E3 MESH & WH MESH Mid-Tower PC Case Quick Installation Guide A comprehensive quick installation guide for the GAMDIAS TALOS E3 MESH and TALOS E3 WH MESH mid-tower PC cases, covering specifications, parts, assembly steps, and compatibility.
	GAMDIAS TALOS M1A Mid-Tower PC Case Quick Installation Guide A comprehensive quick installation guide for the GAMDIAS TALOS M1A mid-tower PC case, covering specifications, exploded view, parts, accessory list, and step-by-step installation procedures for side panels, motherboard, PSU, HDDs, PCI-E cards, and fan/radiator compatibility, along with I/O port and connector details.
	GAMDIAS AURA GC1 Elite Mid-Tower PC Case Quick Installation Guide A quick installation guide for the GAMDIAS AURA GC1 Elite Mid-Tower PC Case, covering specifications, parts, assembly steps, and I/O connectors.
	GAMDIAS TALOS E2 Elite Mid-Tower PC Case Quick Installation Guide A comprehensive quick installation guide for the GAMDIAS TALOS E2 Elite Mid-Tower PC Case, detailing specifications, component installation, and compatibility for PC builders.
	GAMDIAS TALOS E3 / TALOS E3 WH Mid-Tower PC Case Quick Installation Guide GAMDIAS TALOS E3 and TALOS E3 WH are mid-tower PC cases. This quick installation guide provides essential information on specifications, component compatibility (fans, radiators), installation procedures for motherboard, PSU, and storage drives, as well as front panel I/O ports and connectors. Learn how to assemble your PC with GAMDIAS.
	AURA GC5 Mid-Tower PC Case Quick Installation Guide This guide provides quick installation instructions for the AURA GC5 Mid-Tower PC Case, detailing specifications, parts, and assembly steps for components like the motherboard, PSU, and storage drives.
	GAMDIAS ATLAS M3M Mini-Tower Gaming PC Case Installation Guide A comprehensive guide to installing components in the GAMDIAS ATLAS M3M Mini-Tower Gaming PC Case, covering motherboard, PSU, storage, and cooling system setup.
	GAMDIAS ATLAS E1 Mid-Tower PC Case Quick Installation Guide A quick installation guide for the GAMDIAS ATLAS E1 Mid-Tower PC Case, detailing specifications, assembly steps, I/O connections, and software setup for optimal system building.