Manuals+

GAMDIAS ATLAS E1 Mid-Tower PC Case Quick Installation Guide

Specifications

Product NameATLAS E1 / ATLAS E1 WH
Case TypeMID Tower
Dimension (L x W x H)360 x 210 x 480mm (14.2 x 8.3 x 18.9 inch)
Chassis Dimension (L x W x H)358 x 210 x 465 mm (14.1 x 8.3 x 18.3 inch)
Motherboard Supportmini-ITX, microATX, ATX
Expansion Slots7
MaterialSPCC, ABS, Tempered Glass
WindowFront, Left
Radiator SupportTop: 240 mm, Rear: 120 mm
Fan SupportTop: 2 x 120mm / 2 x 140mm, Rear: 1 x 120mm, PSU Shroud: 2 x 120mm
Pre-installed FansRear: 1 x 120mm ARGB Fan
Pre-installed Control BOXNo
Motherboard Sync5V 3-Pin Addressable Header
Drive Bays1 x 3.5" (Chassis Bottom), 2 x 2.5" (SSD Bracket)
ClearanceCPU cooler height limitation: 160mm, VGA length limitation: 340mm, PSU length limitation: 160mm
I/O PortUSB 3.0 x 2, HD Audio x1, LED Switch x1, Monitor Mode Switch x1

Exploded View & Parts

Diagram showing an exploded view of the PC case components. Key parts are numbered: 1. Chassis Body, 2. Tempered Glass Side Panel & Screw, 3. Right Side Panel, 4. Top Dust Filter, 5. Glass Front Panel, 6. IO Port & Screen, 7. 120MM ARGB FAN, 8. Rubber Foot.

Parts List

Part NumberParts NameQuantityUsed for
1Chassis Body1-
2Tempered Glass Side Panel & Screw1-
3Right Side Panel1-
4Top Dust Filter1-
5Glass Front Panel1-
6IO Port & Screen1-
7120MM ARGB FAN1-
8Rubber Foot4-

Accessory

Table listing accessories included with the PC case.
FigureParts NameQtyUsed for
-Stand-off 4.75 x 9.5 x 6.5mm3Motherboard
-Screw #6 x 6 mm4PSU
-Screw #6 x 5 mm8HDD
-Screw M3 x 5 mm252.5" HDD/Motherboard/ODD
-CableTie5Cable Management

Side Panel Removal

Illustration showing the process of removing the side panel. Text indicates the action in multiple languages.

Remove the side panel.

(Multilingual instructions provided in original document: Español: Retire el panel lateral, Deutsch: Seitenblende entfernen, Polski: Usu panel boczny, Français: Retirez le panneau latéral, Svensk: Ta bort sidopanelen, Italiano: Rimuovere il pannello laterale, Português: Remova o painel lateral, Türk dili: Yan paneli çıkarın)

Motherboard Installation

Illustration showing how to install a motherboard. It depicts laying the chassis down, placing the motherboard in position, and securing it with screws.

Lay down the chassis. Install the motherboard in the proper location and secure it with screws.

(Multilingual instructions provided in original document)

PSU Installation

Illustration showing the placement of the Power Supply Unit (PSU) within the PC case.

Place the PSU in the proper location.

(Multilingual instructions provided in original document)

3.5" & 2.5" HDD Installation

Illustrations showing the installation of storage drives. Part A shows aligning a 3.5" HDD into mounting holes and screwing it in. Part B shows aligning a 2.5" SSD into mounting holes and screwing it in.

A. 3.5" HDD

Align the HDD into the mounting holes and screw it in.

B. 2.5" SSD

Align the SSD into the mounting holes and screw it in.

(Multilingual instructions provided in original document)

Air Cooling Compatibility

Diagrams and text indicating fan compatibility for different areas of the case: Top (2 x 120mm or 2 x 140mm), PSU Shroud (2 x 120mm), and Rear (1 x 120mm).
LocationFan Support
Top2 x 120mm or 2 x 140mm
PSU Shroud2 x 120mm
Rear1 x 120mm

(Multilingual specifications provided in original document)

Radiator Compatibility

Diagrams and text indicating radiator compatibility for different areas of the case: Top (240mm) and Rear (120mm).
LocationRadiator Support
Top240mm
Rear120mm

(Multilingual specifications provided in original document)

I/O Ports

Illustration showing the front panel I/O ports. Numbered ports correspond to: 1. Power Button, 2. Screen Control & Reset, 3. Integrated Audio (Headphone & Microphone), 4. USB 3.0, 5. USB 3.0.

Front Panel I/O Ports:

I/O Connectors

Diagram illustrating the motherboard header connections for the front panel I/O. This includes USB 3.0, USB 2.0, HD AUDIO, POWER SW, HDD LED, POWER, and ARGB LED+/- connectors.

Refer to your motherboard's manual for front panel header locations and pin-outs.

(Multilingual instructions provided in original document)

Key Connectors:

Display Connection

Diagram showing the connection of the case's display unit to the motherboard. It indicates connecting the case's USB cable to a motherboard USB header.

Connect the case's display unit to the motherboard via USB.

Software Download: Zeus Cast

Steps for downloading the Zeus Cast software.
  1. Visit Gamdias Official Website.
  2. Visit ATLAS M1 Product Page.
  3. Scroll down the page to find the Download Resource section.
  4. Download the Zeus Cast Package.

Mode Variation and Instruction

Illustration showing the TEMP button and its function to cycle through display modes.

Press the TEMP button to switch ATLAS display information between 4 different modes:

Software Instruction

Illustrations showing the Zeus Cast software interface for general settings and digital display customization.

General Settings:

Note: The Temperature Display switch function can only be changed by Zeus Cast.

Digital Display Settings:

Note: The Temperature Display switch function can only be changed by Zeus Cast.

PDF preview unavailable. Download the PDF instead.

ATLAS E1 Adobe PDF library 17.00 Adobe Illustrator 29.0 (Windows)

Related Documents

Preview GAMDIAS TALOS E3 / TALOS E3 WH Mid-Tower PC Case Quick Installation Guide
GAMDIAS TALOS E3 and TALOS E3 WH are mid-tower PC cases. This quick installation guide provides essential information on specifications, component compatibility (fans, radiators), installation procedures for motherboard, PSU, and storage drives, as well as front panel I/O ports and connectors. Learn how to assemble your PC with GAMDIAS.
Preview GAMDIAS AURA GC2 Elite Mid-Tower PC Case Quick Installation Guide
Quick installation guide for the GAMDIAS AURA GC2 Elite Mid-Tower PC Case, detailing specifications, parts, assembly steps, and compatibility for air cooling and radiators.
Preview GAMDIAS ATLAS M3M Mini-Tower Gaming PC Case Installation Guide
A comprehensive guide to installing components in the GAMDIAS ATLAS M3M Mini-Tower Gaming PC Case, covering motherboard, PSU, storage, and cooling system setup.
Preview GAMDIAS TALOS E3 & E3 WH Mid-Tower PC Case Quick Installation Guide
A comprehensive quick installation guide for the GAMDIAS TALOS E3 and TALOS E3 WH mid-tower PC cases, covering specifications, parts, assembly, and compatibility.
Preview GAMDIAS AURA GC2 Mid-Tower PC Case Quick Installation Guide
A concise guide to installing the GAMDIAS AURA GC2 Mid-Tower PC Case, covering specifications, component installation, and I/O connections.
Preview GAMDIAS AURA GC1 Elite Mid-Tower PC Case Quick Installation Guide
A quick installation guide for the GAMDIAS AURA GC1 Elite Mid-Tower PC Case, covering specifications, parts, assembly steps, and I/O connectors.
Preview GAMDIAS ATHENA M3 Mid-Tower PC Case User Manual and Installation Guide
Explore the GAMDIAS ATHENA M3 Mid-Tower PC Case with this comprehensive user manual. Learn about safety precautions, package contents, specifications, and step-by-step installation instructions for building your PC.
Preview MARS IE4M Micro-Tower PC Case: Installation Guide & Specifications
Comprehensive guide to the GAMDIAS MARS IE4M Micro-Tower PC Case, covering installation, safety, specifications, and maintenance for optimal PC building.