PawHut 3x8x1.95m Chicken Coop Assembly Instructions
Model: IN221101088V01_GL, D51-277V03
Important Information
IMPORTANT: RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Parts List
BOX 1-2: 3x8x1.95m Chicken Coop
| Model | Picture Description | Size | QTY |
|---|---|---|---|
| 1 | Long cylindrical tube | 1420mm | 4 |
| 2 | Long cylindrical tube | 1925mm | 16 |
| 2A | Long cylindrical tube with a single hole | 1925mm | 4 |
| 3 | Medium cylindrical tube | 970mm | 6 |
| 3A | Medium cylindrical tube with a single hole | 970mm | 4 |
| 4 | Long cylindrical tube | 1540mm | 10 |
| 5 | Cylindrical tube | 1687mm | 1 |
| 5A | Cylindrical tube with a single hole | 1687mm | 1 |
| 6 | Short cylindrical tube | 605mm | 1 |
| 7 | Long cylindrical tube | 1850mm | 1 |
| 10 | Short cylindrical tube with marking 'Ø16 395mm' | 395mm | 8 |
| A | Long straight metal bar | 1600mm | 2 |
| C | Short straight metal bar | 497mm | 2 |
| P | Flat rectangular panel | 2x3.48m | 2 |
| Q | Roll of mesh material | 32m | 1 |
BOX 2-2: 3x8x1.95m Chicken Coop
| Model | Picture Description | Size | QTY |
|---|---|---|---|
| D | Metal bracket with three angled tube sockets | 5 | 5 |
| E1 | Metal connector with four angled tube sockets and a base plate | 2 | 2 |
| E2 | Metal connector with four angled tube sockets and a base plate (different hole configuration than E1) | 2 | 2 |
| F | Metal bracket with two holes | 7 | 7 |
| G | Metal bracket with one hole | 1 | 1 |
| H | Metal bracket with three holes | 9 | 9 |
| V | Y-shaped metal connector | 1 | 1 |
| I | Rectangular metal plate with multiple holes | 16 | 16 |
| J | Metal clip or fastener | 2 | 2 |
| K | M6 screw with nut (spare included) | 26 | 26 |
| L | M8 screw with nut (spare included) | 6 | 6 |
| M | Multi-purpose metal plate with holes and slots | 1 | 1 |
| O | Plastic ties or straps | 2 | 2 |
| P | Flat rectangular panel | 2x3.48m | 2 |
| Q | Roll of mesh material | 32m | 1 |
| R | Black cable ties | 24 | 24 |
| S | Metal rod with threaded ends | 1 | 1 |
| T | Metal spring clip | 2 | 2 |
| W | Metal stake or peg | 12 | 12 |
| Instructions | Diagram showing assembly steps | 1 | 1 |
Assembly Instructions
Step 01
Assemble the base frame using connectors E1 and E2 at the corners. Attach tubes (1, 2, 2A) and brackets (F, A, G) as shown. Detail views illustrate connection methods. ? symbols indicate important connection points.
Step 02
Erect the vertical poles by inserting tubes (3, 3A) into the connectors. A detail view shows the insertion process. ? symbols indicate important connection points.
Step 03
Add horizontal supports and bracing using tubes (4) and brackets (D, H). Detail views show connections made with parts V and K. ? symbols indicate important connection points.
Step 04
Construct the roof structure using tubes (2) and part 7. Detail views illustrate connections made with part V. ? symbols indicate important connection points.
Step 05
Attach the roof panels (P) and mesh (Q). Use hardware such as T, L, J, K, and M for secure connections. Detail views provide specific connection instructions. ? symbols indicate important connection points.
Assembly Complete
The chicken coop is now assembled. The mesh (Reticulation) is attached, and stakes (W) can be used for securing the structure.
Assembly Tips
E1 & E2 Connector Usage: Ensure correct orientation of connectors E1 and E2. The diagram shows that using E1 and E2 in alternating corners for a rectangular frame is correct (✔️), while using E2 and E1 in alternating corners is incorrect (❌).
Support and Contact
For any questions or assistance, please contact the customer care center. Contact details are available in multiple languages (English, French, Spanish, Portuguese, German, Italian, UK). For specific regional contact information, please refer to the manufacturer's website or documentation.
Recycling information: Please dispose of packaging responsibly. [Recycle symbol] Association [Association symbol] Delivery [Delivery symbol] Waste Disposal Site [Waste disposal site symbol]. Addresses on quefairedemesdechets.fr.
