Product Overview
A textual description of the DOD Gunslinger MOSFET Distortion pedal. This is a compact guitar effects pedal designed to deliver classic MOSFET-based distortion tones.
The pedal features a durable silver-finished metal enclosure with a clear layout of controls and branding.
Controls and Features
The DOD Gunslinger MOSFET Distortion pedal features the following controls:
- 1. GAIN: Adjusts the amount of distortion gain.
- 2. LEVEL: Adjusts the overall output level of the distortion effect.
- 3. LOW: Adjusts the amount of low frequencies in the distortion signal.
- 4. HIGH: Adjusts the amount of high frequencies in the distortion signal.
- 5. INPUT: Connect your instrument here.
- 6. FOOTSWITCH: Turns the effect on and off.
- 7. LED: Lights up when the effect is engaged.
- 8. OUTPUT: Connect to the input of another pedal or your amplifier.
Usage Recommendations
Most guitarists and bassists will prefer placing the Gunslinger at the beginning of their effects chain. A typical effects signal chain often consists first of distortion effects, then modulation effects (Chorus, Flanger, Phaser, Tremolo, etc.), and finally time-based effects (Delay and Reverb). Placing the Gunslinger towards the front of your chain will help preserve its characteristic tone regardless of the pedal combination that follows. Experimentation with different effect placements is encouraged.
Specifications
| Specification | Details |
|---|---|
| Input | 1/4" TS Unbalanced - 470 kΩ |
| Output | 1/4" TS Unbalanced - 100 Ω |
| Current Draw | 20 mA |
| Bypass | True Bypass |
| Power | 9VDC alkaline battery (not included) / PS0913DC power adapter (optional) / also compatible with 18VDC negative center tap PSU |
| Warranty | 1 Year |
Safety and Compliance Information
General Warnings:
- Read and keep these instructions.
- Follow all warnings and instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- For indoor use only.
- Do not block any ventilation openings. Install in accordance with manufacturer's instructions.
- Do not install near any heat sources, such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Unplug this apparatus during lightning storms or when unused for long periods.
- Use only accessories/accessories specified by the manufacturer.
Electrical Safety:
- [Electric Shock Warning] Do not open the unit. No user-serviceable parts inside. Refer all servicing to qualified personnel. Opening the chassis for any reason will void the manufacturer's warranty.
- Protect the power cord from being walked on or pinched.
- Ensure the mains plug remains readily operable.
- If the supplied plug does not fit your outlet, consult an electrician.
- This appliance must be connected to a mains socket with protective earth.
- For 240V operation, use a suitable CSA/UL approved power cord.
Environmental and Disposal:
- Do not use this product above 2000 meters altitude.
- Do not expose this equipment to rain or moisture.
- Dispose of this product responsibly, following local electronic waste regulations. Do not mix with general household waste.
UK Mains Plug Specifics:
- A molded mains plug cut from a cord is unsafe. Dispose of it properly.
- NEVER plug a damaged or cut mains plug into a 13AMP socket.
- Ensure the fuse cover is fitted. Replacement fuses are 13A and must be ASTA approved to BS1362.
Wiring Instructions (if applicable):
The wires in the mains lead are colored as follows: GREEN AND YELLOW – EARTH, BLUE – NEUTRAL, BROWN – LIVE. If the wire colors do not match the terminals in your plug, connect as follows:
- Green/Yellow wire to the terminal marked E, Earth symbol, or Green.
- Blue wire to the terminal marked N or Black.
- Brown wire to the terminal marked L or Red.
The green/yellow conductor must be connected directly to the chassis of the unit.
WARNING: Improper grounding can lead to hazardous voltages between the chassis and ground, potentially causing serious injury or death.
Manufacturer Information
DOD
59 Hwagok-ro 61gil, Gangseo-gu, Seoul 07590 Republic of Korea
Contact: support@digitech.com
