ZEBRONICS
Portable BT Speaker CLIPPER
Introduction
Thank you for purchasing the “ZEB-CLIPPER" Portable BT Speaker. Please read this user manual carefully and keep it for future reference.
Important Notes
- Avoid the usage of this product at high-temperature and high-humidity environments.
- Avoid the self-disassembling of the product, or it will result in voiding the Product's warranty.
- To know more about Terms and conditions for warranty policy, please visit https://zebronics.com/pages/warranty-policy.
Features
- BT v5.3 | mSD
- Built-in Rechargeable Battery
- TWS Function
- Carry Loop
- LED Indicator
- Media/Volume Control
- Type-C Charging
- Call Function
- Compact design
- Magnetic Clip
Specifications
| Model No. | ZEB-PSPK 58 |
| Output Power (RMS) | 4W |
| BT Version | v5.3 |
| Driver Size | 3.6 cm |
| Speaker Impedance | 3Ω |
| Frequency Response | 80Hz-20kHz |
| S/N Ratio | ≥85dB |
| Max Supported mSD memory size | 32GB |
| Supported Audio formats | MP3 |
| Charging time | 1.5 h |
| Playback time | 20h* (at 50% volume) |
| Product Dimension | 4.2 x 3.1 x 7.4 cm |
| Net. Weight | 70g |
Package Contents
- Speaker: 1 U
- QR Code Guide: 1 U
- Charging cable: 1 U
Button Inscription
The speaker features several buttons for control:
- Button 1: Volume increase / Next Track
- Long Press: Change to the next track.
- Short Press: Increase volume level.
- Button 2: Play/Pause
- Short Press: Play or pause music.
- Long Press: Turn the speaker On/Off.
- During a call: Short press to attend an incoming call; press and hold for 2 seconds to reject the incoming call.
- Button 3: Volume decrease / Previous
- Long Press: Change to the previous track.
- Short Press: Decrease volume level.
- Button 4: LED indication
Indicates the status of the speaker (e.g., charging, power on/off).
Port Inscription
The speaker has the following ports:
- 1. Type C charging Port: For charging the speaker.
- 2. mSD Card Slot: For inserting mSD cards to play audio files.
General Instructions
BT Mode
- Power ON the speaker.
- Turn ON Bluetooth on your Source Device and search for nearby BT devices.
- Search for the BT name "ZEB-CLIPPER" and tap to connect it.
mSD Mode
Connect the mSD device to the respective port, and the speaker would automatically start playing from the mSD device.
TWS Connectivity
To enable True Wireless Stereo (TWS) functionality:
- Turn on both “ZEB-CLIPPER” Speakers in BT mode.
- Press and hold the '+' and '-' Buttons for 2 Seconds on any one speaker to initiate TWS pairing.
- After a few seconds, both speakers will get connected successfully.
- Now, search for nearby BT Devices on your Mobile phone or other source device and tap on BT name "ZEB-CLIPPER" to connect.
Note: Requires two ZEB-CLIPPER speakers for using the TWS feature.
Charging the Speaker
- Connect the Type-C charging cable to the DC 5V charging port of the speaker and insert the other end into a USB power adapter.
- The Red LED glows, indicating that the battery is being charged. The Red LED will turn off once it is fully charged.
