Introduction
Thank you for purchasing the ZEB-COUNTY PRO 11 Portable BT Speaker. Please read this user manual carefully before operation and save it for future reference.
Important Notes:
- Avoid using this product in high temperature and high humidity environments.
- Avoid self-disassembly of the product, as it will void the product's warranty.
- Turn off the speaker if it is not being used for a long period of time.
For warranty information, please visit: https://zebronics.com/pages/warranty-policy
Features
- 16W RMS Output
- Up to 24 hours* Backup
- Dual 10.16cm Drivers
- TWS Function
- Bluetooth v5.4
- Supports USB, Micro SD, AUX, and FM
- 6.3mm Microphone Input
- 4 RGB LED Modes
- Carry handle
- Media / Volume control
- Built-in Rechargeable battery
Specifications
| Model | ZEB-PSPK 55 |
| Output Power (RMS) | 16W |
| BT Version | v5.4 |
| Driver Size | 10.16cm x 2 |
| Speaker Impedance | 2 Ohms |
| Frequency Response | 40Hz-20kHz |
| S/N Ratio | Greater than or equal to 70dB |
| Max. Supported USB/mSD Memory Size | 32GB |
| Supported Audio Formats | MP3 |
| Charging Time | 5 hours |
| Playback Time | 24 hours* |
| Product Dimension (W x D x H) | 16.5 x 15.2 x 36 cm |
| Net. Weight | 1.1 Kg |
* at 50% Volume (LED off)
Package Contents
- Speaker: 1 Unit
- Charging Cable: 1 Unit
- Input Cable: 1 Unit
Buttons and Ports Description
The top panel of the Zebronics COUNTY PRO 11 speaker features various ports and controls:
Ports:
- 1. AUX Input port: Connect an external audio source via an AUX cable.
- 2. mSD card slot: Insert a Micro SD card for media playback.
- 3. Charging Indication LED: Indicates the charging status.
- 4. USB Input port: Connect a USB drive for media playback.
- 5. Charging input port: Connect the charging cable to charge the speaker.
- 11. Microphone input port: Connect a microphone using a 6.3mm jack.
Controls:
- 6. Mode Switch: Cycle through different modes (BT, USB, SD, FM, AUX).
- 7. Next Track/ Volume Increase: Short press for next track; long press to increase volume.
- 8. Play/Pause: Short press to play or pause music; double click for TWS pairing.
- 9. Previous Track/Volume Decrease: Short press for previous track; long press to decrease volume.
- 10. Power ON/OFF: Use the slider switch to turn the speaker ON or OFF.
Operating Modes
Bluetooth (BT) Connectivity:
- Ensure the speaker is ON and in BT mode.
- On your mobile device, search for nearby Bluetooth devices and select "ZEB-COUNTY PRO 11" to connect.
- Short press [Previous Track/Volume Decrease] or [Next Track/ Volume Increase] to control media.
- Long press [Previous Track/Volume Decrease] or [Next Track/ Volume Increase] to adjust the Volume.
- Short press [Play/Pause] to Play/Pause the music.
USB/Micro SD Card Mode:
- Once the speaker is ON, insert a USB drive or Micro SD card into the respective port.
- The speaker will automatically detect and play supported audio content from the USB/Micro SD card.
- Note: This mode is only selectable if a USB/mSD flash card is connected.
- Short press [Previous Track/Volume Decrease] or [Next Track/ Volume Increase] to control media.
- Long press [Previous Track/Volume Decrease] or [Next Track/ Volume Increase] to adjust the Volume.
- Short press [Play/Pause] to Play/Pause the music.
FM Radio:
- Once the speaker is ON, switch to FM mode using the Mode Switch.
- Short press the [Play/Pause] key to auto-scan for available FM channels.
- Short press [Previous Track/Volume Decrease] or [Next Track/ Volume Increase] to change the scanned FM channels.
- Long press [Previous Track/Volume Decrease] or [Next Track/ Volume Increase] to adjust the volume.
TWS Function:
- Turn on two ZEB-COUNTY PRO 11 speakers you wish to pair.
- Double click the "[Play/Pause]" button on one speaker to activate TWS mode.
- After a few seconds, both speakers will connect successfully.
- Then, search for nearby Bluetooth devices on your mobile and tap "ZEB-COUNTY PRO 11" to connect.
- Note: TWS connection must be established first, followed by the Bluetooth connection with the mobile phone. This feature requires two ZEB-COUNTY PRO 11 speakers.
AUX-In:
- Switch the speaker to AUX Mode using the Mode Switch.
- Connect one end of the AUX cable to the speaker's AUX Input port and the other end to an audio source.
- Songs played from the audio source will be heard through the speaker.
RGB Light Control:
- When the speaker is turned on, the RGB lights activate automatically.
- Users can switch between different light modes by long-pressing the Mode Switch button.
Charging Instruction
Connect the charging cable to the speaker's charging input port. The red LED indicates that the speaker is charging. The red light turns off once the speaker is fully charged.
