Zebronics ZEB-COUNTY 7 Portable BT Speaker
User Manual
Introduction
Thank you for purchasing the "ZEB-COUNTY 7" Portable BT Speaker. Please read this user manual carefully before operation & save it for future reference.
Important Notes
- Avoid the usage of this product at high-temperature and high-humidity environments.
- Avoid the self-disassembling of the product, or it will result in voiding the Product's warranty.
- Turn off the speaker when the speaker is not in use.
- To know more about Terms and conditions for warranty policy, please visit zebronics.com/pages/warranty-policy.
Features
- BT v5.3 / FM/ USB / mSD card
- Call function
- Media / Volume control
- TWS Function
- Carry Loop
- RGB LED lights
- Built-in Rechargeable battery
Specifications
| Model No. | ZEB-PSPK 40 |
| Output Power (RMS) | 8W |
| BT Version | v5.3 |
| Driver Size | 5 cm |
| Speaker Impedance | 3Ω |
| Frequency Response | 120Hz-15kHz |
| S/N Ratio | ≥87dB |
| Max Supported USB/mSD memory size | 32GB |
| Supported Audio formats | MP3 |
| Charging time | 4h |
| Playback time | 15h* (*at 50% volume(LED off)) |
| Product Dimension (W x D x H) | 14.4 x 8 x 4.1cm |
| Net. Weight | 270g |
Package Content
- Speaker: 1 U
- Charging Cable: 1 U
- QR Code Guide: 1 U
Button & Port Description
The speaker features controls on the top panel and ports on the bottom panel.
Top Panel Buttons:
- 1. Play / Pause / LED Modes: Short press to play/pause music or cycle through LED lighting modes.
- 2. Volume Down / Previous Track: Short press to decrease volume or skip to the previous track. Long press to decrease volume continuously.
- 3. Volume Up / Next Track: Short press to increase volume or skip to the next track. Long press to increase volume continuously.
- 4. Mode: Press to switch between Bluetooth, FM, USB, mSD, and AUX input modes.
Bottom Panel Ports:
- 5. Type-C Port: Connect the USB charging cable here for charging.
- 6. USB input: Insert a USB drive for music playback.
- 7. mSD input: Insert a Micro SD card for music playback.
- 8. ON/OFF Switch: Slide this switch to turn the speaker ON or OFF.
Instructions for Use
BT Mode
- Power ON the speaker and ensure it is in Bluetooth mode.
- Switch ON Bluetooth on your phone or tablet and search for nearby BT devices.
- Search for the BT name "ZEB-COUNTY 7" and tap to connect it.
Micro SD / USB Mode
Connect the Micro SD card or USB device to the respective ports of ZEB-COUNTY 7. The speaker will automatically start playing from the connected device.
AUX Mode
Connect the speaker to an audio source device using the 3.5mm cable provided in the box. Once connected, change the speaker to AUX mode, and audio can be streamed via the speaker from the connected source.
FM Radio Mode
Short press the mode button to switch the speaker to FM mode. Long press the +/- buttons to change the channels.
TWS Connectivity
After entering BT mode, long press the "M" (Mode) button on either of the two speakers. A pairing tone will be heard, indicating the inter-connection between the two speakers. Now, check your phone's BT setting for "ZEB-COUNTY 7" and connect it to experience True Wireless Stereo.
Charging the Speaker
- Connect the USB charging cable to the DC 5V Charging port of the speaker and insert the other end into a USB power source/adapter.
- The Red LED glows, indicating that the battery is being charged. The Red LED will turn off once it is fully charged.
