Quick Start Guide
This Quick Start Guide is designed for first time use. For safety and more information, refer to your USER MANUAL.
Questions or Concerns?
SIFENE supports free replacement for any problems or refund for any dissatisfaction under warranty.
Contact Us!
Email: support@sifene.com
Web: https://sifene.com/
What's Included
- 1: Juice cup
- 2: Pulp cup
- 3: Auger
- 4: Juice screen
- 5: Main body
- 6: Juice container
- 7: Drum lid
- 8: Pusher
- 9: Cleaning brush
Important Safeguard Information
- The juicer has a safety lock setting which means the juicer will not work until the juicer has been fully installed.
- The juicer motor has an overheat protection feature. When overloaded, the motor's thermal protector will automatically cut off power. "EO" will display on the screen. Let the motor rest for 20-30 minutes to cool down. It will then be ready to use again.
How to Assemble
-
Step 1
Place the juice container on the main body. Match the 3 notches at the bottom of the juice container.
-
Step 2
Put the juice screen into the juice container, aligning the dot with the dot.
-
Step 3
Place auger. Turn and press it down until auger clicks into place.
-
Step 4
Place the drum lid, aligning the dot on the drum lid with the dot on the juice container.
-
Step 5
Turn clockwise rotation to close, aligning the dot on the drum lid to the lock.
-
Step 6
Place the juice/pulp cup separately.
Press the ON/OFF button to turn the appliance on.
Operation Modes:
FORWARD (FWD): Pulls down and squeeze the ingredients slowly.
REVERSE (REV): Pushes the ingredients back up if it is stuck.
ON/OFF: Starts / Stops operation.
Tips to avoid clogging in juicers:
- Cut the ingredients into 1"-1.5" small pieces before juicing.
- Feed the ingredients into the juicer gradually.
- Ensure the pusher is firmly in place when feeding produce into the juicer.
Recommended ingredient size: Up to 83mm for whole fruits/vegetables, or cut into smaller pieces (approx. 1"-1.5").
