SiFENE Juicer Quick Start Guide
This Quick Start Guide is designed for first-time use. For safety and more information, refer to your USER MANUAL.
What's Included
The juicer includes the following components:
- 1. Main Body
- 2. Operation Panel (REV, STOP, SOFT, HARD buttons)
- 3. Unlock Button
- 4. Juice Cup
- 5. Pulp Cup
- 6. Pusher
- 7. Juice Container
- 8. Auger
- 9. Fine Strainer
- 10. Juicing Body Cover
The juicer is designed for high yield of fruits and vegetables, including:
- Apples
- Oranges
- Pears
- Carrots
- Celery
- Cucumber
- Wheatgrass
How to Assemble
-
Step 1: Connecting Juicer
Align the feed chute with the "unlock mark." Turn counterclockwise until it clicks.
-
Step 2: Aligning Auger
Align the auger shaft with the motor shaft and push to the bottom. Adjust by turning the auger if misaligned.
-
Step 3: Inserting Strainer
Insert the fine strainer's large hole at the screw propeller's tail. Push the positioning ribs into the juicer's notch.
-
Step 4: Securing Cover
Align the three buckles on the cover and body. Push in and rotate counterclockwise to tighten the cover and body.
-
Step 5: Placing Cups
Place the juice cup next to the fuselage and the pomace cup under the slag outlet of the juice extractor.
How to Use
The operation panel features the following buttons:
- REV button: Used when slag discharge is not smooth or clogged.
- STOP button: Stops the motor.
- SOFT button: Low-speed working button, suitable for soft fruits and vegetables like tomatoes, watermelons, and grapes.
- HARD button: High-speed working button, suitable for hard fruits and vegetables like carrots and apples.
Tips to Avoid Clogging in Juicers
- Cut ingredients into 1" - 1.5" small pieces before juicing.
- Feed ingredients into the juicer gradually.
- Ensure the pusher is firmly in place when feeding produce into the juicer.
Questions or Concerns?
SiFENE supports free replacement for any problems or refund for any dissatisfaction under warranty.
Contact Us!
Email: support@sifene.com
Web: https://sifene.com/
