Poly Edge E400 Series Wall Mount Quick Start

Contents

• Wall Mount Brackets
• Ethernet Network Cable .18m (7in)
• (1) M3 x 8mm T10
• (4) M3 x 8mm

Tools for Wall Mount

A drill and screwdriver are required.

Ordered Separately

• Poly Edge E400 Series Handset
• Handset Cord
• Ethernet Network Cable 1.5m (5ft)
• AC Power Adapter (Optional)

Required Cabling

Diagram shows the back of the Poly Edge E400/E450 phone with ports highlighted for cabling. An Ethernet cable is connected to the network port, and the handset cord is connected to the handset port.

Optional Cabling

Diagram shows optional cabling connections for the phone.

Installation Steps

1. Cable Routing: Route cables through the designated openings on the wall mount bracket.
2. Bracket Attachment: Secure the wall mount bracket to the wall using appropriate screws (not included).
3. Phone Mounting: Attach the phone to the wall mount bracket.
4. Connecting Cables: Connect the Ethernet cable and handset cord to the phone.
5. Optional Power: Connect the AC power adapter if needed.

Step 1: Illustrates routing cables through the back of the phone.

Step 2: Shows two circular areas on the back of the phone where cables are routed.

Step 3: Depicts attaching a mounting plate to the back of the phone.

Step 4: Shows the wall mount bracket components and screws (M3 x 8mm, quantity 3) for attaching the mounting plate to the phone.

Step 5: Illustrates attaching the phone with the mounting plate to the main wall mount bracket using screws.

Optional Step: Shows how to attach the phone to the wall mount bracket, with arrows indicating the direction of insertion.

Step 6: Shows the phone attached to the wall mount bracket, with a close-up of the connection points.

Step 7: Illustrates detaching the phone from the wall mount bracket by rotating it.

Step 8: Shows the phone detached from the wall mount bracket, with screws (M3 x 8mm, quantity 1) for securing the bracket.