Poly Edge E100/E220 Wall Mount Quick Start
Brand: Poly
Product: Poly Edge E100/E220 Wall Mount
Management Software: Poly Lens (poly.com/lens)
Contents
- Poly Edge E100/E220 phone [Image of Poly Edge E100/E220 desk phone]
- Handset [Image of phone handset]
- Handset Cord [Image of coiled phone cord]
- Wall Mount Template [Image of paper template for marking drill points]
- Ethernet Network Cable 1.5 m (5 ft) [Image of Ethernet cable]
- AC Power Adapter (Optional) [Image of power adapter]
Tools for Wall Mount
The following tools are typically required for wall mounting:
- Drill [Image of power drill]
- Screwdriver [Image of screwdriver]
Required Cabling
This section illustrates the necessary connections for the phone.
[Diagram showing the back of the Poly Edge E100/E220 phone with ports labeled for handset, Ethernet, and power. It also shows the wall mount bracket with corresponding slots for cable routing.]
Optional Cabling
This section shows optional cable connections.
[Diagram illustrating optional connections, possibly for headset or other peripherals, routed through the wall mount bracket.]
Installation Steps
Cable Routing
Ensure cables are routed neatly through the designated channels on the wall mount bracket before connecting them to the phone.
[Illustration showing cables being threaded through the back of the wall mount bracket.]
Wall Mount
- Prepare the phone and wall mount bracket.[Illustration showing the Poly Edge E100/E220 phone and the separate wall mount bracket.]
- Route the handset cord and Ethernet cable through the appropriate slots in the wall mount bracket.[Illustration depicting the handset cord and Ethernet cable being fed through the wall mount bracket.]
- Use the wall mount template to mark drilling points on the wall. It is recommended to use a 2.5 mm drill bit and #6 screws (approximately 3.5 mm diameter).[Diagram showing the wall mount template positioned on a wall, with markings for screw holes. It indicates the recommended drill bit size and screw type.]
- Attach the wall mount bracket securely to the back of the Poly Edge E100/E220 phone.[Illustration showing the wall mount bracket being fastened to the rear of the phone.]
- Slide the phone, with the attached bracket, onto the wall mount.[Illustration demonstrating the phone unit being inserted into the wall-mounted bracket.]
- Secure the phone to the wall mount using screws.[Illustration showing screws being used to fix the phone to the wall mount.]