USER GUIDE

SAFETY & WARNINGS

Read all the following instructions before use. Keep this user guide for future reference.

Ensure that you have received all parts according to the components list prior to assembly. If any parts are missing or faulty, contact help.Kogan.com for support.

• Closely follow the assembly instructions. Improper installation may result in damage or serious personal injury.
• Ensure that the surface the stand will be located on can safely support the combined weight of the equipment and all attached hardware and components prior to use.
• Use only the mounting screws provided. Do not overtighten mounting screws.
• This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
• This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.

Care

At regular intervals (at least every three months) check that the product is secure and safe to use.

COMPONENTS

Illustration of the Kogan Freestanding Vacuum and Accessories Stand: A tall, slender metal stand with a square base, designed to hold a vacuum cleaner and its accessories. It features a base plate, a vertical pole, and multiple hooks or holders along the pole for accessories.

Parts List:

• A Upper base (x1): The top section of the stand's vertical support.
• B Lower base (x1): The middle section of the stand's vertical support, featuring accessory holders.
• C Base (x1): The square, weighted bottom plate of the stand.
• D Nut (x2): Fasteners used to secure bolts.
• E Mounting screw (x8): Screws used for assembly.
• F Bolt (x2): Bolts used for attaching the mounting bracket.
• G Allen key (x1): Tool for tightening screws.
• H Wrench (x1): Tool for tightening nuts.

Diagrams showing each component: A is a long metal piece. B is a similar long metal piece with curved hooks. C is a flat square base. D shows a nut. E shows a screw. F shows a bolt. G shows an L-shaped Allen key. H shows a wrench.

ASSEMBLY

Step 1:

Align the lower base's (B) screw holes with the holes located on the base (C).

Attach the lower base (B) to the base (C) with four mounting screws (E), using the Allen key (G) to tighten.

Illustration showing the lower base (B) being positioned onto the square base (C). Four mounting screws (E) are inserted through holes in (B) into (C), and the Allen key (G) is shown in use to tighten them. Circular arrows indicate the direction of tightening.

Step 2:

Align the upper base's (A) screw holes with the holes located on the top of the lower base (B).

Attach the upper base (A) to the lower base (B) with the remaining four mounting screws (E), using the Allen key (G) to secure.

Illustration showing the upper base (A) being attached to the top of the lower base (B). Four mounting screws (E) are inserted through holes in (A) into (B), and the Allen key (G) is shown in use to tighten them. Circular arrows indicate the direction of tightening.

Step 3:

With the base (C) facing you, screw in the mounting attachment with the bolts (F).

Align the bolts (F) with the holes on the mount attachment, and the middle holes of the upper base (A).

Using the wrench (H), secure the bolts (F) on the back of the upper base (A) with the nuts (D). After performing this step, assembly is now complete. You can now mount your vacuum and its accessories onto the stand for use.

An exploded view shows the mounting attachment being prepared for installation. Bolts (F) are inserted through the mounting attachment and then through the middle set of holes on the upper base (A). The wrench (H) is shown securing nuts (D) onto the bolts (F) from the back of the upper base (A). A separate illustration shows the fully assembled stand.

Notes:

• This rack is compatible with the mounting attachments for the Dyson V6, V7, V8, V11 and Cyclone V10. Mounting attachments for other vacuums may not be compatible with this rack.
• Mounting attachment is not included.

Need more information?

We hope that this user guide has given you the assistance needed for a simple set-up.

For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com.

kogan.com