Kogan C7 Cordless 22.2V Stick Vacuum Cleaner User Guide

SAFETY & WARNINGS

To reduce the risk of fire, electric shock or injury to persons or property, the following basic safety precautions should always be followed:

Never use this appliance with a damaged cord, plug or other damaged parts. Check if the voltage indicated on the label corresponds with the local mains voltage before you connect the appliance.
Always ensure the charging connector, cord and plug are dry. Never immerse the appliance into the water or any other liquid. Do not rinse it under a tap except for the dust cup, the HEPA filter and the rolling brush parts.
Always ensure that your hands are dry before removing the plug from the mains outlet. Never pull the plug out of the mains outlet by its cord.
Children should always be supervised to ensure that they do not play with this appliance.
The appliance should not be used by adults or children who lack experience, product knowledge or disability which might cause a hazard unless they have been correctly instructed.
Always keep the battery pack far from the fire and flammable items.
Never use this appliance to suck liquids, glass, metal fragments and burning things such as ashes, cigarette butts and matches and so on.
Always ensure that the dust cup and the battery pack are installed before using.
If the cord, plug and any other parts get damaged or the appliance falls into water, stop use and immediately unplug from the main power. Never disassemble the main body, repair or replace any parts by yourself.

⚠️ Do not use any non-original parts with the unit as they may cause damage.

OVERVIEW

The Kogan C7 Cordless Stick Vacuum Cleaner consists of the following main components:

1. Main unit: The primary body of the vacuum cleaner containing the motor and dust collection system.
2. Dust cup: Collects dust and debris.
3. Cyclone cone: Part of the dust separation system within the dust cup.
4. Battery pack: Provides power to the vacuum cleaner.
5. Electrical tube: Connects the main unit to the floor brush, housing electrical connections.
6. Floor brush: The main cleaning head for floors.

COMPONENTS LIST

Main body
Floor brush
Battery pack
Crevice tool
Electrical tube
Adapter
Storage base
Stretch brush
User guide

Note: Illustrations in this user guide are for reference only and may differ slightly.

ASSEMBLY

Follow these steps to assemble the vacuum cleaner:

Insert the battery pack into the main body. You will hear a click sound when fitted. (Diagram shows battery pack being inserted into the main unit).
Connect the electrical tube to the main body. (Diagram shows tube connecting to the main unit).
Connect the floor brush to the electrical tube. (Diagram shows floor brush connecting to the tube).

Note: A new unit may become hot with a slight plastic odour after running the motor at high speed for several minutes. This is normal and not a cause for concern.

Functional Buttons

Familiarize yourself with the key buttons and features:

Speed Switch: Adjusts suction power. (Diagram shows finger pointing to speed switch on the main unit).
Battery detach button: Used to remove the battery pack. (Diagram shows finger pointing to battery release button).
Charge set: Indicates charging status or connection point. (Diagram shows finger pointing to charging port/indicator).
Dust drop button: Releases dust from the dust cup. (Diagram shows finger pointing to dust release button).
Dust cup release: Detaches the dust cup from the main unit. (Diagram shows finger pointing to dust cup release mechanism).
ON/OFF: Powers the vacuum cleaner on and off, and cycles through power modes. (Diagram shows finger pointing to the ON/OFF button).
Tube unlock: Releases the electrical tube from the main unit. (Diagram shows finger pointing to tube release mechanism).
Floor brush unlock: Releases the floor brush from the electrical tube. (Diagram shows finger pointing to floor brush release mechanism).

OPERATION

Press the ON/OFF button to cycle between off, standard power, and high power modes.

Lithium Battery Charging

Attention: Use only the original charger or a replacement specified by Kogan.com; otherwise, the lithium battery can be damaged.

The battery needs to be charged when the indicator lights blink. The indicator lights will continue blinking while charging and turn green when fully charged. (Diagram shows the battery pack being connected to a charger, and then the main unit being connected to the charger).

CLEANING & CARE

Storage

Place the machine into the storage base when not in use.

Dust Cup Cleaning and Maintenance

Method 1:

Press the dust drop button and empty the dust into a rubbish bin. (Diagram shows dust cup with dust being emptied into a bin).

Method 2:

Press the dust cup release button and take out the dust cup from the main body. (Diagram shows dust cup being detached from the main unit).
Take off the HEPA filter and cyclone cone, empty all the rubbish and clean them. Install them back as pictured after the parts have air dried. (Diagram shows HEPA filter and cyclone cone being removed and then reinstalled).

Attention: Do not use the machine before reinstalling the HEPA filter and cyclone cone, or it may damage the unit.

Floor Brush Cleaning and Maintenance

Step 1: Press the roll brush release button. (Diagram shows finger pressing a release button on the floor brush head).

Step 2: Take the roll brush out. (Diagram shows the roll brush being removed from the floor brush head).

Step 3: Wash the roll brush and dry it. Install as illustrated below. (Diagram shows the roll brush being washed and then reinserted).

Step 4: Reset the roll brush release button to the lock position. (Diagram shows the release button being moved back to its original position).

TROUBLESHOOTING

Problem	Possible Causes	Resolutions
Not working	No power Brush protected or obstructed	Charge the vacuum Restart the machine
Weak suction	The dust cup is full of rubbish The HEPA filter is full of dust Floor brush or electrical tube has been clogged by hair or large pieces of rubbish	Clean the dust cup's rubbish Clean or change the HEPA filter Clean the floor brush or electrical tube's inner rubbish
No LED light is shown when charging	The battery pack is not installed in the right position The adapter's connector is not inserted in the charging hole	Install the battery pack in the right position Push the adapter's connector into the charging hole in the right position
Not full battery after charging	Charging time is not enough Battery is ageing	Charge for enough time as instructed Replace battery
Floor brush not working	Large particles or objects vacuumed The resistance from the flooring is too high and the vacuum has entered protection mode. The brush roll is entangled by hair or wire	Clean the floor brush and restart the machine Turn off the machine and take the floor brush a little high of the blankets, leave some space between floor brush and blankets, and restart the machine Clean the brush from hair, wire or other things

SPECIFICATIONS

Lithium battery: 2200mAh

Voltage: 22.2V

Adaptor voltage: ~100-240V

Adaptor output: 27V 0.5A

Power: 120W

Noise: Approx. 68dB

Usage time: Approx. 30 minutes

Charging time: Approx. 4 hours

Item size: 390 x 220mm

Item weight: 1.44kg (Main unit)
2.47kg (Main unit attached to the electrical tube and floor brush)

NOTES

This section is for personal notes.

Need More Information?

We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com.

Visit kogan.com for more products and information.

	Kogan MX15 Absolute Cordless Stick Vacuum Cleaner User Guide User guide for the Kogan MX15 Absolute Cordless Stick Vacuum Cleaner with Auto-Empty Dock (KAVACSTM15G). Provides detailed instructions on safety, assembly, operation, cleaning, maintenance, and troubleshooting.
	Kogan V10 PRO Cordless 25.2V Stick Vacuum Cleaner User Guide User guide for the Kogan V10 PRO Cordless 25.2V Stick Vacuum Cleaner (Model: KAVACSTV10A), covering safety warnings, product overview, assembly instructions, operation, cleaning and care, troubleshooting, and specifications.
	Kogan Z10 Pro Cordless Stick Vacuum Cleaner User Guide \| KAVACSTV10A Comprehensive user guide for the Kogan Z10 Pro Cordless Stick Vacuum Cleaner (KAVACSTV10A). Includes safety warnings, overview, assembly, operation, cleaning, troubleshooting, and specifications.
	Kogan KAVAC21RECA Cordless Stick Vacuum Cleaner User Manual Comprehensive user manual for the Kogan KAVAC21RECA Cordless 2-in-1 Stick Vacuum Cleaner, covering safety precautions, parts identification, operation, charging, maintenance, and product disposal.
	Kogan MX15 Absolute Cordless Stick Vacuum Cleaner User Guide Comprehensive user guide for the Kogan MX15 Absolute Cordless Stick Vacuum Cleaner (KAVACSTM15F), covering safety warnings, overview, assembly, operation, cleaning, maintenance, and troubleshooting.
	Kogan MX9 Cordless Stick Vacuum Cleaner User Guide (KAVACSTM09X) Comprehensive user guide for the Kogan MX9 Cordless Stick Vacuum Cleaner (KAVACSTM09X). Learn about safety precautions, components, assembly, operation, cleaning and maintenance, specifications, and troubleshooting.
	Kogan MX15 Absolute Cordless Stick Vacuum Cleaner User Guide Comprehensive user guide for the Kogan MX15 Absolute Cordless Stick Vacuum Cleaner with Auto-Empty Dock (KAVACSTM15G), covering safety, assembly, operation, cleaning, and troubleshooting.
	Kogan MX15 Absolute Cordless Stick Vacuum Cleaner User Guide Comprehensive user guide for the Kogan MX15 Absolute Cordless Stick Vacuum Cleaner with Auto-Empty Dock, covering safety, assembly, operation, cleaning, and troubleshooting.