Waterdrop Dispenser Filtration System

Can TDS Indicate Water Quality?

TDS (Total Dissolved Solids) refers to minerals like sodium, calcium, and magnesium. While TDS levels can vary, they do not fully indicate water quality. This product's filtration system is designed to adsorb contaminants and heavy metals while retaining beneficial minerals.

Note: Only Reverse Osmosis Filtration Systems can significantly lower TDS. This dispenser uses coconut activated carbon for effective filtration.

Thank You for Choosing Our Product

Our dispenser provides clean, healthy, and great-tasting water by offering household water filters for your family.

What's Included in the System

The system includes the following components:

• Lid
• Water filter cartridge
• Replaceable filter indicator
• Reservoir
• Tank
• Tap spout

[Diagram Description: A visual representation of the dispenser system components laid out, showing the lid, water filter cartridge, replaceable filter indicator, reservoir, tank, and tap spout.]

Care and Safety Information

• Use cold water only. Operating temperature: 41-100°F (5-38°C).
• Do not use with microbiologically unsafe water or water of unknown quality. This filter is for tap water only.
• Store the system in a refrigerator or cool area away from direct sunlight for best results.
• If the filter dries out, soak it in cold tap water for 10 minutes to remove bubbles before use.
• If tap water is turbid, flush the system for a few minutes until the water runs clear.
• If not using the dispenser for an extended period, store it in a clean, lidded container in the refrigerator to prolong cartridge life.
• Protect the filter from freezing to prevent cracking and leakage.

Getting Started / Instruction for Use

1. Step 1: Attach the filter. Insert the water filter cartridge into the dispenser. [Diagram Description: Shows attaching the filter cartridge to the dispenser head.]
2. Step 2: Insert the filter. Place the filter into the dispenser. [Diagram Description: Shows placing the filter assembly into the main dispenser body.]
3. Step 3: Fill the dispenser. Add tap water to the dispenser. [Diagram Description: Shows pouring water into the top reservoir of the dispenser.]
4. Step 4: Place the lid. Secure the lid onto the dispenser. [Diagram Description: Shows placing the lid on top of the dispenser.]
5. Step 5: Attach the tap spout. Connect the tap spout to the dispenser. [Diagram Description: Shows screwing the tap spout onto the dispenser's base.]
6. Step 6: Prime the filter. Flush the filter by dispensing water for a few minutes. [Diagram Description: Shows water flowing from the tap spout, indicating the filter is being primed.]
7. Step 7: Attach the indicator. Attach the filter life indicator. [Diagram Description: Shows attaching the filter life indicator to the dispenser lid or body.]

Filter Indicator Guide

Change Water Filter

Dispose of the used filter properly. Follow the instructions in Step 2 and Step 7 for installing a new filter and indicator.

Change Smart Indicator

The filter life indicator helps track filter usage. Refer to the component list for its placement. When the indicator shows the filter needs replacement (e.g., turns red), replace the filter cartridge.

Technical Specifications

Questions and Answers

• Q: Why does the water flow?
  A: TDS levels do not fully indicate water quality. This product uses coconut activated carbon to adsorb contaminants while retaining beneficial minerals.
• Q: Why doesn't the TDS value reduce after filtering?
  A: TDS levels do not fully indicate water quality. Only Reverse Osmosis Filtration Systems can significantly lower TDS. This filter retains beneficial minerals.

3-Month Quality Assurance

This product is covered by a 3-month limited warranty from the date of purchase. For warranty service, please contact Waterdrop Customer Support at 1-888-500-5777 or support@waterdropfilter.com. Proof of purchase is required. This warranty does not cover damage caused by misuse, accidents, or unauthorized modifications.