AIKE Automatic Soap Dispenser AK1333
Product Introduction
Importer & Manufacturer: Zhejiang Aike Appliances Co., Ltd.
Address: Yong'an Industry Zone, Xianju, Taizhou City, 317306 Zhejiang, China
Product Components
The AIKE Automatic Soap Dispenser (Model AK1333) features a top cover, an indicator light, an outlet nozzle, an induction window, a main body, an on-off button, and a charging interface. An annotation states "Subject to the actual object".
Specifications
| Feature | Details |
|---|---|
| Model | AK1333 |
| Power Supply | DC3.7V (Lithium battery, using Type-C charging interface) |
| Volume | 280ml |
| Sensing Distance | 3-7cm |
| Dimensions | 121mm x 77mm x 186mm |
| Liquid Supply | 1.0-3.0ml |
| Waterproof Rating | IPX4 |
| Net Weight | 0.48kg |
Website: www.zjaike.com
Email: sales@zjaike.com
How to Use
- Open the upper cover and pour in the soap. Wipe clean any overflow.
- Long press the on-off button on the back for over two seconds. The indicator light turns white, indicating the machine is operational. Long press again to turn the machine off; the indicator light turns orange.
- Place your hand under the sensor. The LED indicator will light up, and soap will dispense automatically.
- For first-time use, you may need to sense multiple times until soap dispenses normally.
- When the battery voltage drops below 3.3V, the indicator light flashes orange, signaling the need for charging. A conventional 5V charging plug is required and must be provided by the user.
Warnings
⚠ Minors should use this product under guardian supervision to prevent accidental ingestion of soap.
This machine contains microcomputer and precision electronic circuits. It is strictly forbidden to shower with the device.
Packing List
Contents: Machine x 1, Type-C cable x 1, Product Certificate x 1, User Manual x 1.
Important Notes:
- Before initial setup, verify the contents against the packing list. Contact your local dealer or manufacturer if any items are missing.
- Specifications for accessories may change without prior notice. For installation issues, contact the dealer or manufacturer.
- Main parts are packed in protective bags. Avoid excessive collision or rubbing during handling and unpacking to prevent damage.
Liquid Adjustment
To adjust liquid output, long press the on-off button for more than 2 seconds. The machine turns on with a white flashing light, setting the default liquid output.
The factory default is approximately 1.0ml (measured with water). Pressing the on-off button once changes the output to approximately 2.0ml (indicator light flashes twice). Pressing again changes it to approximately 3.0ml (indicator light flashes three times). Pressing a third time returns to the factory default setting. This cycle repeats.
The on-off button is located on the back of the machine. The liquid output levels are indicated by the number of flashes of the indicator light.
