AIKE AK1205 Automatic Soap Dispenser

Packing List

• Dispenser*1
• Mounting plate*1
• ST4x25 Screw*2
• M4x10 Screw*1
• Hollow Wall Anchors*2
• Key*1
• User Guide*1

Importer: Zhejiang Aike Appliances Co.,Ltd.

Manufacturer: Zhejiang Aike Appliances Co.,Ltd.

Yong'an Industry Zone, Xianju, Taizhou City, 317306 Zhejiang, China

Official website: www.zjaike.com

E-Mail: support@zjaike.com

Certifications: CE, UK, CA

How to install your dispenser

1. Remove the mounting plate from the dispenser. Attach the mounting plate to the wall and draw the positions of 2 mounting holes with a pencil.
2. Use a drill to bore 2 holes (6mm) according to the marks, put the hollow wall anchors into the corresponding holes.
3. Align the mounting holes on the mounting plate with the hollow wall anchors, and fix the mounting plate on the wall with screws.
4. Align the upper slot on the back of the dispenser with the upper clip on the mounting plate, then slide the dispenser down to make the dispenser and the mounting plate stuck.
5. Screw the anti-theft screw into the screw hole, insert the battery box and rotate the battery box to lock it.

Installation height notes

For normal countertops, maintain a minimum distance of 25cm (9.8in) from the dispensing nozzle to the surface below.

For reflective countertops, maintain a minimum distance of 35cm (13.78in) from the dispensing nozzle to the surface below.

If installing on a wall without a countertop below, you can install the dispenser at any desired height.

How to use your dispenser

1. Insert the battery box and rotate the battery box to lock it.
2. Open the top cover assembly with the key, and fill in the soap. Wipe off any spilled soap from the kettle holder.
3. Press and hold the power button to power on or off. The indicator light flashes 3 times. Press the power button after power-on to increase the dispense volume. There are 5 adjustable levels; the default setting is the second level. The number of times the indicator light flashes represents the current level.
4. At the first use, place your hand under the sensor for a moment, then remove it. Repeat multiple times until soap dispenses.

Battery replacement reminder

The indicator light flashes three times every thirty seconds, indicating that the dispenser needs battery replacement.

• Recommended for indoor use.
• For daily cleaning, do not rinse the dispenser; wipe it with a towel.
• This dispenser is not suitable for use in the shower room.

User Guide (Other Languages)

This product is also available with user guides in German (Benutzerhandbuch), French (Mode d'emploi), Italian (Guida utente), Spanish (Guía del usuario), and Japanese (取扱説明書).