YC1386-D Antenna Specification

1. Antenna Information

Manufacturer: 深圳市池恒实业有限公司 (Shenzhen Chiheng Industrial Co., Ltd)

Model: YC1386-D

2. Antenna Geometry

The antenna geometry is depicted in a diagram showing various connection points and dimensions. Key dimensions indicated are:

• 1.50mm
• 7.78mm
• 1.00mm
• 2.50mm
• 2.70mm
• 2.35mm
• 3.10mm

Connection points labeled include BATT IN, GND, BATT_N, and others that appear to be related to power and ground.

4. 1D Radiation Pattern

The radiation patterns illustrate the antenna's performance at different angles and frequencies:

① Phi = 0deg

This section displays polar plots of the antenna's gain in dB for frequencies 2.4GHz, 2.44GHz, and 2.48GHz, with Phi set to 0 degrees. The plots show the directional characteristics of the antenna.

② Phi = 90deg

Similar to the above, these plots show the antenna's gain in dB for the same frequencies but with Phi set to 90 degrees, illustrating performance in a different plane.

③ Theta = 90deg

These plots show the antenna's gain in dB for frequencies 2.41GHz, 2.44GHz, and 2.48GHz, with Theta set to 90 degrees, providing further insight into the radiation pattern.

5. Peak Gain

The peak gain of the antenna was measured at different frequencies: