Sunco

What's in the Box?

Solar Sidewalk Light

A diagram illustrates the contents of the box. The main light unit with solar panel is shown at the top. Below are the components labeled A, B, and C: A (x1) Light, B (x2) Light Pole, C (x1) Ground Stake.

• A: Light (x1)
• B: Light Pole (x2)
• C: Ground Stake (x1)

Before You Start

Safety Information

• Suitable for outdoor environments ranging from -4°F to 104°F.
• Do not cover the fixture with thermally insulating material.
• Not intended for use with emergency fixtures.
• Not compatible with occupancy sensors.
• Not compatible with dimmers or timing devices.
• Not compatible with third party sensors.
• All electrical connections must be in accordance with local and National Electric Code (N.E.C.) standards.
• Please review installation manual carefully before proceeding. Consult a qualified electrician if you are unfamiliar with proper installation.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference that may cause undesired operation. Please review all instructions carefully prior to installation.

[Warning Symbol] Cancer & Reproductive Harm - www.P65Warnings.ca.gov

Quickstart Guide

Step 1

Connect light poles and ground stake.

Step 2

Connect the light pole to the light. Press [Power Button] to toggle CCT and brightness.

Step 3

Allow light to charge in sunlight before operation. [Sun Symbol]

Step 4

Battery can be removed by unscrewing the cap from the light. [Battery Symbol]

Installation Guide

STEP 1

a. Remove accessories from packaging.

b. Connect the light poles (B) and the ground stake (C).

Diagram shows two light pole sections (B) being connected together, and then the combined pole being inserted into the ground stake (C).

STEP 2

a. Connect the light pole (B) to the light (A).

b. Press the [Power Button] to turn the light on. Continue pressing the [Power Button] to toggle between color temperatures and its selectable brightness.

Diagram shows the light unit (A) with the solar panel on top, and the connected light pole (B) with the ground stake at the bottom. The power button is indicated on the light unit.

Installation Guide (Cont.)

STEP 3

a. Once fully assembled, place the light into desired location.

b. This location should have clear access to sunlight and kept away from other sources of light that could interfere with the sensor.

Diagram shows the assembled solar light placed in the ground, with rays from the sun shining on the solar panel.

STEP 4

Note: To replace the rechargeable battery, unscrew the cap from the light and replace the battery.

Diagram shows the top cap of the light being unscrewed, revealing a 3.7V rechargeable battery being lifted out.

Product Details

Diagrams show the dimensions of the solar light. The overall height is approximately 7.5 inches. The light unit is approximately 4.7 inches by 4.7 inches. The diameter of the pole is approximately 1.3 inches. The stake portion is approximately 6.7 inches. The solar panel surface is approximately 0.8 inches thick.

Specifications

Common Troubleshooting

We've got you covered! Our troubleshooting section is here to shed some light and provide you with easy-to-follow solutions for any problem.

If you still need some assistance, feel free to contact Sunco. Our team of lighting experts are happy to help brighten your day.