What's in the Box?
Solar Sidewalk Light
- A x1 Light
- B x2 Light Pole
Ground Stake
- C x1 Ground Stake
Before You Start
Safety Information
To reduce the risk of fire or physical injury:
- Suitable for outdoor environments ranging from -4°F to 104°F.
- Do not cover the fixture with thermally insulating material.
- Not intended for use with emergency fixtures.
- Not compatible with occupancy sensors.
- Not compatible with dimmers or timing devices.
- Not compatible with third-party sensors.
- All electrical connections must be in accordance with local and National Electric Code (N.E.C.) standards.
- Please review installation manual carefully before proceeding. Consult a qualified electrician if you are unfamiliar with proper installation.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference that may cause undesired operation.
Please review all instructions carefully prior to installation.
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov
Quickstart Guide
Step 1
Connect light poles and ground stake.
Step 2
Press the Power button to toggle between CCTs and its brightness.
Step 3
Connect light poles with the light.
Step 4
Allow light to charge in sunlight before operation.
Installation Guide
STEP 1
a. Remove accessories from packaging.
b. Connect the light poles (B) and the ground stake (C).
STEP 2
a. To access the light's Power switch, twist the light's lens cover off.
b. Press the Power button to turn the light on. Continue pressing the Power button to toggle between color temperatures and its selectable brightness.
STEP 3
a. Ensure that the light lens is sealed tight.
b. Connect the light pole (B) to the light (A).
STEP 4
a. Once fully assembled, place the light into the desired location.
b. This location should have clear access to sunlight and be kept away from other light sources that could interfere with the sensor.
Product Details
Specifications
| Voltage | 3.7V | Lifetime | 25,000 Hours |
| Wattage | 2W | Lumens | 120 lm |
| Battery | 500mAh 3.7V | CRI | 70+ |
| CCT | 2700K, 3000K, 4000K | Usage | Outdoor |
| Material | ABS | Warranty | 1 Year |
| Beam Angle | 120° | Battery Included | Yes |
| Dimmable | Selectable Brightness | Efficacy | 130 lm/W |
Common Troubleshooting
We've got you covered! Our troubleshooting section is here to shed some light and provide you with easy-to-follow solutions for any problem.
If you still need some assistance, feel free to contact Sunco. Our team of lighting experts are happy to help brighten your day.
Installation
Light isn't turning on.
Allow the light to fully charge in sunlight before operation.
Turned On
Light doesn't turn on when power button is pressed.
Allow the light to fully charge in sunlight before operation.
Clean Panel
Light doesn't turn on when power button is pressed.
Verify the solar panels are free of dust, dirt, or debris. Debris on solar panels can reduce their efficiency.
Location
Light isn't turning on in certain locations.
Check for any obstructions or damage on the light.
support@sunco.com
(844) 334-9938
REV 2.0
P65Warnings.ca.gov
