Sunco

User Manual

Solus Solar Garden Light

SKU: GD_MD4_SR-BK-2740K

What's in the Box?

Solar Sidewalk Light

• A: Light (x1)
• B: Light Pole (x2)
• C: Ground Stake (x1)

Before You Start

Safety Information

To reduce the risk of fire or physical injury:

• Suitable for outdoor environments ranging from -4°F to 104°F.
• Do not cover the fixture with thermally insulating material.
• Not intended for use with emergency fixtures.
• Not compatible with occupancy sensors.
• Not compatible with dimmers or timing devices.
• Not compatible with third-party sensors.
• All electrical connections must be in accordance with local and National Electric Code (N.E.C.) standards.
• Please review installation manual carefully before proceeding. Consult a qualified electrician if you are unfamiliar with proper installation.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference that may cause undesired operation. Please review all instructions carefully prior to installation.

WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

Quickstart Guide

1. Step 1: Insert light into light pole.Diagram: Shows the light head being inserted into the top of a light pole.
2. Step 2: Cover solar panel & select CCT.Diagram: Shows a hand covering the solar panel on the light head, with an indicator for 'Selectable Color Temperature'.
3. Step 3: Insert light pole into main body.Diagram: Shows the assembled light pole being inserted into a ground stake.
4. Step 4: Sunlight access required for location.Diagram: Shows the assembled light placed in a location receiving sunlight.

Installation Guide

STEP 1

a. Remove accessories from packaging.
b. Connect the light poles (B) with the ground stake (C).

STEP 2

a. Connect the light pole (B) to the light (A).

STEP 3

a. Once fully assembled, place the light into the desired location.
b. This location should have clear access to sunlight and be kept away from other light sources that could interfere with the sensor.

STEP 4

a. Allow the light to charge before operation.
b. Press the Power button to turn the light on.
c. When exposed to light, cover the solar panels before pressing the Power button.
d. Continue pressing the Power button to toggle between color temperatures and its selectable brightness.

Product Details

Diagram: The diagram shows the dimensions of the Solus Solar Garden Light. The light head has a height of 0.8 inches. The main pole section has a height of 7.5 inches. The ground stake has a height of 6.7 inches. The diameter of the pole is approximately 1.3 inches. The overall width of the light head is 6.4 inches, and its depth is 4.7 inches.

Specifications

Common Troubleshooting

This section provides solutions for common issues encountered with the Solus Solar Garden Light. Sunco's team of lighting experts are available to help if further assistance is required.

Installation

Issue: Light isn't turning on.

Solution: Allow the light to sit outdoors for a full day before testing its functionality.

Turned On

Issue: Light doesn't turn on when power button is pressed.

Solution: Allow the light to sit outdoors for a full day before testing its functionality.

Clean Panel

Issue: Light doesn't turn on when power button is pressed.

Solution: Check for any obstructions or damage on the light.

Location

Issue: Light isn't turning on in certain location.

Solution: Please ensure the solar light is not being obstructed, as it may result in incorrect functioning due to the lack of direct sunlight.