Hampton Bay Mill Valley Fully Woven Lounge Chair
Use and Care Guide
Item #: 704 114
Model #: 153-002-LC
Product Overview
We appreciate your trust in Hampton Bay. This guide provides information for the proper use and care of your Mill Valley Fully Woven Lounge Chair. We strive to create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
Customer Service
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service:
- 8:00 a.m. - 7:00 p.m. EST, Monday - Friday
- 9:00 a.m. - 6:00 p.m. EST, Saturday
1-855-HD-HAMPTON
Safety Information
DANGER: Please keep children out of the assembly area during assembly.
WARNING: Do not stand on the chairs. Do not sit on the armrests.
CAUTION: Use the chairs on flat ground only.
Warranty
Two Year Frame, Weave and Fabric Limited Warranty
What Is Covered: We warrant the frame, weave and fabric to be free of manufacturing defects to the original purchaser for two years.
What Is Not Covered: It remains the customer's responsibility for freight and packaging charges to and from our service center. This warranty does not cover commercial use, hardware, acts of nature, fire, freezing and abusive use. In addition, purchased parts are not covered under this warranty. We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Care Instructions
Before using, wipe with a clean, dry cloth. Do not use bleach or solvents. Treat the frame with one-step liquid wax for maximum protection against UV light and salty, damp air. When not in use, store the furniture in a cool, dry place. If your set includes cushions or mesh fabric, they may be cleaned by hand with a mild solution of soap and water. Rinse the cushions thoroughly and allow to drip dry. Do not machine wash or tumble dry, as the cushions may shrink. Do not use bleach or solvents on fabrics.
You may contact our customer service department with any questions by phone at 1-855-HD-HAMPTON or visit www.hamptonbay.com.
Pre-Assembly
Planning Assembly
It will take two persons about 15 minutes to complete the assembly process.
Hardware Included
NOTE: Hardware not shown to actual size.
Part | Description | Quantity |
---|---|---|
AA | Bolt (M6x20) | 2 |
BB | Bolt (M6x45) | 6 |
CC | Bolt (M6x55) | 2 |
DD | Washer | 10 |
EE | Bolt Cap | 10 |
FF | Hex wrench | 1 |
Package Contents
- A: Back panel (1)
- B: Left armrest (1)
- C: Right armrest (1)
- D: Seat panel (1)
- E: Back cushion (1)
- F: Seat cushion (1)
Assembly
1. Attaching armrests to the back panel
- Place the back panel (A) upside down on a flat, smooth surface.
- Attach the armrests (B) and (C) to the middle of the back panel (A) with washers (DD) and bolts (AA) using hex wrench (FF). (See Fig. 1.1)
- Attach the armrests (B) and (C) to the bottom of the back panel (A) with washers (DD) and bolts (CC) using hex wrench (FF). (See Fig. 1.2)
IMPORTANT: Do not fully tighten bolts (AA) or (CC) until the end of Step 2.
Fig. 1.1: Illustration showing attachment of armrests to the middle of the back panel using bolts AA and washers DD.
Fig. 1.2: Illustration showing attachment of armrests to the bottom of the back panel using bolts CC and washers DD.
2. Attaching armrests to the seat panel
- Plug the seat panel (D) into the back panel (A). (See Fig. 2.0)
- Attach armrests (B) and (C) to the seat panel (D) with washers (DD) and bolts (BB) using hex wrench (FF).
- Do not fully tighten bolts (BB) until the end of step 2. (See Fig. 2.1)
- Attach armrests (B) and (C) to the seat panel (D) with washers (DD) and bolts (BB) using hex wrench (FF). (See Fig. 2.2 & 2.3)
- Fully tighten all the bolts (AA, BB and CC) and cover all bolts with bolt caps (EE).
Fig. 2.0: Illustration showing the seat panel being plugged into the back panel.
Fig. 2.1: Illustration showing attachment of armrests to the seat panel using bolts BB and washers DD.
Fig. 2.2 and 2.3: Illustrations showing the final tightening of bolts and application of bolt caps.
3. Placing cushions
- Turn the lounge chair upright.
- Place the cushions (E) and (F) on the chair.
- Level the chair with foot glides at the bottom of the chair.
Retain this manual for future use.