HAMPTON BAY

Item #: 1005 045 427
Model #: FRS60752B-2PKBA

A textual description of the chair: A steel-framed dining chair with wicker detailing on the back and sides, featuring a seat cushion. The chair has four legs and armrests.

Table of Contents

Important Safety Instructions

• Save These Instructions
• Read All Instructions Before Use
• Warranty
• What is Covered
• What is Not Covered
• Pre-Assembly
• Planning Assembly
• Hardware Included
• Chair Package Contents
• Chair Assembly
• Care and Cleaning

Important Safety Instructions

SAVE THESE INSTRUCTIONS

WARNING: This dining chair was made for the explicit purpose of providing outdoor functions and is not to be used as a toy. This product is intended for normal outdoor use; however, the manufacturer recommends storing and / or covering this product when any formidable / severe weather is approaching.

WARNING: Do not locate this product near open flames. Do not use this product as a support. Do not shake, lean or climb on the product. Children under the age of 10, near the product, should be supervised by a competent adult at all times. This product is NOT intended for commercial use and will void the warranty.

READ ALL INSTRUCTIONS BEFORE USE

To reduce the risk of injury to persons:

1. Close supervision is necessary when this product is used by or near children, or disabled persons, if applicable.
2. Use this product only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
3. Do not move the chairs while the chairs are occupied. Failure to obey this caution could result in injury.
4. Do not rock in the chair as you may fall and cause serious injury.
5. Please keep children out of the assembly area before assembly.

WARNING: Weight limit for the chairs is 250 lbs (113.39 kg) for each seat.

WARNING: Do not place heavy objects on the chairs.

CAUTION: When not in use, secure the product in a cool and covered location.

Warranty

3 YEAR FRAME LIMITED WARRANTY

WHAT IS COVERED

We warrant the frames to be free of manufacturing defects to the original purchaser for three years.

WHAT IS NOT COVERED

It remains the customer's responsibility for freight and packaging charges to and from our service center. This warranty does not cover commercial use, hardware, acts of nature, fire, freezing and abusive use. In addition, purchased parts are not covered under this warranty. We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.

Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HamptonBay.com.

Pre-Assembly

PLANNING ASSEMBLY

Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.

NOTE: More than one person may be required to assemble this product.

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

A textual description of the hardware: Includes combination bolts (AA) and a hex wrench (BB).

Pre-Assembly (continued)

CHAIR PACKAGE CONTENTS

A textual description of the chair package contents: The package includes two seats (A), four front legs (B), two left rear legs (C), two right rear legs (D), and two seat cushions (E).

Chair Assembly

1 ATTACHING THE FRONT LEG, LEFT REAR LEG AND RIGHT REAR LEG TO THE SEAT

• Place the seat (A) upside down on a soft surface.
• Attach the front leg (B), left rear leg (C), and right rear leg (D) to the seat (A) using M6x20 combination bolt (AA).

NOTE: Loosely tighten all bolts using the hex wrench (BB).

Diagram showing the seat upside down with legs being attached using bolts.

Chair Assembly (continued)

2 TIGHTENING ALL BOLTS AND PUT THE SEAT CUSHION ON THE CHAIR

• Once all of the bolts are in place, fully tighten all the bolts using hex wrench (BB).
• Turn the chair right side up.
• Put the seat cushion (E) on the chair.
• Ensure all connections are secure before use.

A textual description of the final assembly step: The chair is shown upright with the seat cushion placed on it.

Care and Cleaning

• For best results, clean the frame and cushions with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt particles that may accumulate.
• Do not clean with abrasive materials, bleach, or solvents.
• Store the chair in a dry, sheltered place when not in use.
• Keep the chair away from fire, extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet, snow, or wind.