BuTure VC50 Cordless Vacuum Cleaner User Manual

1. WARNING

Thank you for purchasing the BuTure VC50 cordless vacuum cleaner. Before using this machine, please read the following safety warnings and take safety protection measures to avoid malfunctions caused by improper operation.

• This BuTure appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction by a responsible person concerning use of the appliance to ensure that they can use it safely.
• Suitable for dry locations only. Do not use or store outdoors with wet surfaces. Do not handle any part of the plug or appliance with wet hands. Store properly in a dry place indoors.
• Do not use a damaged cable or plug. If the device or charger does not work properly, has been dropped, damaged, missed, or dropped into water, please contact tech-support@ibuture.com, BuTure after-sales team for support.
• Do not vacuum flammable or combustible liquids, such as petrol, or use in areas where liquids may be present.
• Turn off the power switch before plugging or unplugging the adapter.
• Do not vacuum anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Do not use without filters or dust cup to avoid damaging the motor and contaminating the air. Wash hands after using the vacuum cleaner.
• FIRE WARNING: Do not place this product on or near a cooker or any other hot surface and do not incinerate this appliance even if it is severely damaged. The battery might catch fire or explode.
• Unplug the charger from the power outlet before performing routine cleaning or maintenance.
• Battery leaks may occur under extreme conditions. If any liquid gets on your skin, wash quickly with soap and water. If liquid gets into your eyes, rinse with water for at least 15 minutes immediately. Seek medical attention immediately.
• Charge the unit with the charger provided.
• Avoid using this product to vacuum hard, sharp objects, as this may cause damage.

Note: The vacuum cleaner has adopted thermal protection technology to prevent overheating; it will stop working when the item is over-heated.

2. PACKAGE LIST

Please check and confirm the accessories and parts according to the following list before using.

• Main Body*1
• Adjustable Extension Tube*1
• Motorized Floor Brush*1
• Long Crevice Nozzle*1
• 2 in 1 Upholstery Brush*1
• Extra Hepa Filter*1
• Charger*1
• Charging Wall Mount*1
• Extra Sponge Filter*1
• Cleaning Brush*1
• Quick User Guide*1

3. KNOW THE PRODUCT

3.1 Product Details

Diagram shows the cordless vacuum cleaner with the following labeled parts:

• Battery Pack
• Dust Cup Release Button
• Motor
• Telescopic Tube Release Button
• Adjustable Extension Tube
• LED Light
• Digital Touch Screen
• Switch Button
• Dust Cup
• Dust Empty Button
• Motorized Floor Brush Release Button
• Motorized Floor Brush

3.2 Digital Touch Screen

Diagram of the digital touch screen shows:

• Brand Name (BuTure)
• Battery Power Indicator (visual bars)
• AUTO Mode
• Suction Level Indicator Light (visual bars)
• Brush Blocked Indicator
• Manual Mode

3.3 Accessories Function

• 2 in 1 Upholstery Brush: Easy snap-on design, helps remove dust and hair on carpets.
• Long Crevice Nozzle: Removes dust from hard-to-reach areas like windows, bed feet, and gaps between sofas.
• Charging Wall Mount: Fixes the vacuum cleaner and accessories on the wall hanger for easy storage and charging.
• Mini Cleaning Brush: Removes hair, debris, and micro-dust from accessories or filters.

4. PRODUCT ASSEMBLY

4.1 Install Vacuum Cleaner

Diagram shows the main body of the vacuum cleaner.

4.2 Install the Machine

Diagrams illustrate two methods of attaching accessories:

1. Directly install cleaning accessories onto the main body with a "click" sound.
2. Install the extension tube and then attach cleaning accessories to the extension tube, with "click" sounds indicating secure attachment.

4.3 Charging Wall Mount Installation

Diagram shows the components and process for installing the charging wall mount. A warning is displayed:

⚠️ WARNING

• Please ensure there are no gas, water, or electrical cables and wires behind the mounting area.
• To avoid the dock dropping down, please ensure it is installed firmly.
• Store appropriately indoors in a dry place. Do not expose the machine to sunlight or freezing temperatures. Recommended temperature range: 39.2°F (4°C) - 104°F (40°C).

5. HOW TO USE

5.1 Charging

Charging Tips:

• When using a new battery or for the first time after long-term storage, please fully charge the battery first.
• When storing and not using the vacuum cleaner for a long time, please ensure that it is charged and discharged at least once every three months.

Charging Methods:

1. Charge the battery directly. (Diagram shows battery being connected to charger)
2. Charging with Wall Mount. (Diagram shows vacuum cleaner attached to wall mount with charger connected)

5.2 Operating

Battery Power Indicator:

• 25%: Light flashes blue cyclically.
• 50%: Light flashes blue cyclically.
• 75%: Light flashes blue cyclically.
• 100% (Full Charge): Light is always on.

Before each use, make sure that:

• The battery is fully charged and fixed in place.
• The dust cup and filters are cleaned and fixed in place.
• The protective film on the display screen has been removed.

Start To Work:

Press the switch button to turn it on. It will start in MANUAL Mode.

Diagram shows pressing the switch button.

Select Cleaning Mode

1. MANUAL Mode: Touch the "M" on the display screen to switch between three suction gears: MIN (blue indicator), MID (purple indicator), MAX (red indicator).
2. AUTO Mode: Press the "A" button to switch to AUTO mode. The Automatic Load Sensor system automatically adjusts motor speed and suction level between carpets and hard floors for energy-efficient cleaning.

Diagrams show the MIN, MID, and MAX modes on the screen. Diagram for AUTO mode shows a blue light indicating AUTO mode is on, and a white light indicating AUTO mode is off.

⚠️ Abnormal Indicator: When the red light flashes (approx. 5s) and the motorized floor brush does not work, it indicates the motorized floor brush, telescopic tube, or dust cup is blocked. Please clean them promptly.

6. MAINTENANCE

Tip: Please clean the vacuum cleaner regularly to extend its lifespan.

6.1 Main Body Cleaning

• Turn off the power before cleaning the body.
• Use a neutral detergent and wipe the body with a half-wet cloth.
• Avoid sun exposure and store in a cool and dry place.

Diagram shows wiping the main body of the vacuum cleaner with a cloth.

6.2 Wash Dust Cup and Filters

1. Empty Dust Cup

• When using, if the garbage in the dust cup exceeds the MAX Line, please empty it in time.
• Press the dust empty button to empty the dust.

Diagram shows a dust cup with "MAX" line, one with excessive dust (cross mark), and one empty (checkmark).

2. Remove Dust Cup and Filters

• Remove the dust cup from the main body.
• Rotate clockwise to remove the stainless steel filter.
• Rotate the dust cup counterclockwise to remove the HEPA filter and sponge filter.

Diagrams show the removal process for the dust cup, stainless steel filter, and HEPA/sponge filter.

3. Clean and Install Dust Cup/Filters

• Clean the dust cup and filters with water. Ensure the dust cup and filters are dry before use.
• Installation Steps:
  1. Twist the stainless steel filter counterclockwise and place it into the dust cup.
  2. Insert a sponge strainer.
  3. Plug the HEPA filter into the motor.
  4. Twist the dust cup clockwise to connect it to the motor.

Diagrams show the cleaning and re-installation steps for the filters and dust cup.

6.3 Brush Roller Cleaning

Tip: After prolonged use, the bristles may become jammed by hair or similar build-up. It is recommended to clean the brush roller periodically to ensure efficient operation and maintain suction.

1. Press the release button upwards to remove the brush roller.
2. To remove the brush roller and any hair or fibers wrapped around it, use the brush cleaning tool to sweep away debris on the roller.
3. The brush roller is washable. Before replacing, ensure the brush roller is completely dry.
4. Press the brush roller onto the brush head and listen for the locking sound.

Diagrams illustrate the process of removing, cleaning, and reattaching the brush roller.

7. SPECIFICATION

8. TROUBLESHOOTING

NOTE: If the vacuum still does not operate properly, contact Customer Service. Email: tech-support@ibuture.com

9. WARRANTY

9.1 The 2-Year Warranty

• BuTure machines have a 2-year warranty against original defects in material and workmanship when used for private household purposes in accordance with the BuTure Instruction Manual. To extend the warranty to 3 years, please contact tech-support@ibuture.com in time to activate.
• This warranty provides, at no extra cost, all labor and parts necessary to ensure your machine is in proper operating condition during the warranty period.

9.2 What is covered?

• Only applies to purchases made from authorized retailers of BuTure.
• This warranty will only be valid if the machine is used in the country in which it was sold.

9.3 How to claim?

• Please keep your proof of purchase. To make a warranty claim, you need to provide your original purchase receipt with the purchase date and order number on it.

If your machine is not functioning properly, or you have any questions after reading this manual carefully, please feel free to contact us. We will reply within 24 hours and do our best to provide a satisfactory solution.

Email our Customer Service: tech-support@ibuture.com