BUTURE VC70 Cordless Vacuum Cleaner User Manual

1. WARNING

This BUTURE appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised or instructed by a responsible person. Suitable for dry locations only. Do not use or store outdoors with wet surfaces. Do not handle any part of the plug or appliance with wet hands. Store in a dry place indoors.

Do not use a damaged cable or plug. If the device or charger malfunctions, is dropped, damaged, missed, or dropped into water, please contact tech-support@ibuture.com.

Do not vacuum flammable or combustible liquids, such as petrol, or use in areas where liquids may be present.

Turn off the power switch before plugging or unplugging the adapter.

Do not vacuum anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

Do not use without filters or dust cup to avoid damaging the motor and contaminating the air. Wash hands after using the vacuum cleaner.

FIRE WARNING: Do not place this product on or near a cooker or any other hot surface and do not incinerate this appliance even if severely damaged. The battery might catch fire or explode.

Unplug the charger from the power outlet before performing routine cleaning or maintenance.

Battery leaks may occur under extreme conditions. If liquid gets on your skin, wash quickly with soap and water. If liquid gets into your eyes, rinse with water for at least 15 minutes immediately and seek medical attention.

Charge the unit with the provided charger.

Avoid using this product to vacuum hard, sharp objects, as this may cause damage.

Note: The vacuum cleaner has thermal protection technology to prevent overheating; it will stop working when over-heated.

2. PACKAGE LIST

Please check and confirm the accessories and parts according to the following list before using:

• Main Body*1
• Adjustable Extension Tube*1
• Motorized Floor Brush*1
• Long Crevice Nozzle*1
• 2 in 1 Upholstery Brush*1
• Extra HEPA Filter*1
• Wall Mount*1
• Extra Sponge Filter*1
• Mini Cleaning Brush*1
• Charger*1
• Quick User Guide*1

3. KNOW THE PRODUCT

3.1 Product Details

Air Outlet

Dust Cup

Dust Empty Button

Tube Release Button

Telescopic Tube

Length Adjustment Button

Motorized Brush Release Button

Motorized Brush

Digital Touch Screen

Switch Button

Battery Pack Release Button

Dust Cup Release Button

LED Light

3.2 Digital Touch Screen

Battery Power Indicator

Suction Level Indicator Light

Blockage Indicator

Clean Dust Cup Indicator

Suction Adjustment Button

3.3 Accessories Function

• 2 in 1 Upholstery Brush: Easy snap-on design to help remove dust and hair on the carpet.
• Long Crevice Nozzle: Removes dust from hard-to-reach areas like windows, bed feet, and gaps between sofas.
• Wall Mount: Fixes the vacuum cleaner and accessories on the wall hanger for easy storage.
• Mini Cleaning Brush: Removes hair, rubbish, and micro dust on accessories or filters.
• Multi-function Rolling Brush: Removes dust, debris, and hair from all kinds of floors, carpets, and velvet.

4. PRODUCT ASSEMBLY

4.1 Install Vacuum Cleaner

• Directly Install Cleaning Accessories: Attach the desired cleaning accessory directly to the main body.
• Install Extension Tube & Cleaning Accessories: Connect the extension tube to the main body, then attach the cleaning accessory to the extension tube.

4.2 Install Wall Mount

WARNING:

• Please ensure there are no gas, water, or electrical cables and wires behind the mounting area.
• To prevent the dock from dropping, ensure it is installed firmly.
• Store appropriately indoors in a dry place. Do not expose the machine to sunlight or freezing temperatures. Recommended temperature range: 39.2°F (4°C) - 104°F (40°C).

5. HOW TO USE

5.1 Charging

• When using a new battery or for the first time after long-term storage, please fully charge the battery first.
• When storing the vacuum cleaner for a long time, ensure it is charged and discharged at least once every three months.

Charging Methods:

1. Connect the main body to charge.
2. Hang on the wall mount to charge.
3. Charge the battery directly. (Red light flashing: Charging; Green light: Fully Charged)

5.2 Operating

Before each use, make sure that:

• The battery is fully charged and fixed in place.
• The dust cup and filters are cleaned and fixed in place.

Start To Work:

Press the switch button to turn it on; it will start in MANUAL mode.

Select Cleaning Mode:

• In MANUAL mode, touch the "⬆️" button to switch suction level. The suction indicator light will change from gradient color to red in turn: MIN > MID > MAX.
• After switching to the highest suction level in manual mode, continue pressing the "⬆️" button to switch to AUTO mode.

Abnormal Indicator:

When the red light is flashing and the motorized floor brush does not work, it indicates that the motorized floor brush, telescopic tube, or dust cup is blocked. Please clean it immediately. If the floor brush is blocked, the red lock rotor prompt light will always be on. If the ventilation port is blocked, the red lock rotor prompt light will flash 5 times. At the same time, the floor brush will stop working, but the main motor will continue to operate.

6. MAINTENANCE

Tip: Please clean the vacuum cleaner regularly to extend its lifespan.

6.1 Clean the Main Body

• Turn off the power before cleaning the body.
• Use a neutral detergent and wipe the body with a half-wet cloth.
• Avoid sun exposure and store in a cool and dry place.

6.2 Clean the Dust Cup/Filters

• Empty Dust Cup: When the garbage in the dust cup exceeds the MAX line, please empty it in time. [X] MAX [✓] MAX
• Press the dust empty button to empty the dust.

6.3 Wash Dust Cup and Filters

• Remove dust cup from the main body. Press the dust cup release button on the main body, then detach the dust cup.
• Remove filters from the dust cup. First, lift up the sponge filter, then lift up the entire cyclone filter, including the multi-cone filter.
• Remove HEPA filter from the main body. First, lift up the sponge filter, then lift up the entire cyclone filter, including the multi-cone filter.
• Clean dust cup and filters with water. Ensure the dust cup and filters are completely dry before use.
• Install the multi-cone filter and HEPA filter clockwise, aligning the clips to install the cyclone filter. Then install the sponge filter and dust cup.

6.4 Brush Roller Cleaning

Tip: After prolonged use, the bristles may become jammed with hair or similar build-up. It is recommended to clean the brush roller periodically to ensure efficient operation and maintain suction.

• Push the button to the “unlock” sign [?] to remove the brush roller.
• Remove the debris wrapped around the roller with the mini cleaning brush, then rinse the roller with water.
• Gently push the brush roller back into the motorized brush until securely in place. Ensure the brush roller is completely dry before using. [☀️]

7. SPECIFICATION

8. TROUBLESHOOTING

9. WARRANTY

9.1 The 2-Year Warranty

• BUTURE machines have a 2-year warranty against original defects in material and workmanship when used for private household purposes in accordance with the BUTURE Instruction Manual.
• This warranty provides, at no extra cost, all labor and parts necessary to ensure the machine is in proper operating condition during the warranty period.

9.2 What is covered?

Only applies to purchases made from authorized retailers of BUTURE. This warranty is valid only if the machine is used in the country in which it was sold.

9.3 How to claim?

Please keep your proof of purchase. To make a claim under warranty, provide your original purchase receipt with the purchase date and order number.

If your machine is not functioning properly, or you have questions after reading this manual, please feel free to contact BUTURE Customer Service at tech-support@ibuture.com. BUTURE will reply within 24 hours to provide a satisfactory solution.