SciCan HYDRIM® M2 G4 Quick Reference Guide

Basic Operation

1. 1. Power unit ON.
   Image: Front view of the SciCan HYDRIM M2 G4 unit with the power button illuminated.
2. 2. Load Instruments.
   Image: The interior of the HYDRIM M2 G4 with instrument trays being loaded.
3. 3. Close the door.
   Image: The front door of the HYDRIM M2 G4 is shown being closed.
4. 4. Select cycle and press START.
   Image: The touchscreen interface of the HYDRIM M2 G4 displaying cycle options, with a finger pressing the START button.

Touchscreen

• P1 Rinse&Hold ?: Rinse and Hold Cycle. Prevents soil from drying on instruments. For incomplete loads that will not be washed within the hour. NOT a cleaning and disinfection cycle.
• P3 HD. & Dis. ?️: Heavy Duty Cycle with Disinfection. For heavily soiled instruments and cassettes.
• Door Lock ?
• User/Technician Menu ⚙️
• Network Connector ?
• USB ?
• Water Softener/Detergent Level/Door Status ?/?/?
• Navigation: [Previous] ←, [Next] →, [Enter], [Back]

Refilling the Water Softener Salt Reservoir

1. Unscrew lid.
2. Fill to the top (max. 1 kg / 2.2 lbs.).
3. Screw lid on tightly.
4. Run a complete cycle, with no instruments.

Image: An illustration showing the water softener salt reservoir being filled with tablet salt.

IMPORTANT!

If the salt container is being filled for the first time, it MUST be filled with at least 1 litre of water before adding the salt. Only tablet salt should be used in the softening unit. Fine grained salt such as table salt should NOT be used as it could clog the unit. If salt was spilled while refilling, run a cleaning cycle. The water softener salt is also available from SciCan. Please contact your local dealer.

Cleaning the Chamber

Pour 1.0L of vinegar or citric acid-based instrument neutralizer into the chamber and follow these steps:

Process: Pour neutralizer, select 'Cleaning' cycle on touchscreen, run cycle.

Image: An illustration depicting the chamber cleaning process: pouring a liquid into the chamber, selecting the 'Cleaning' cycle on the touchscreen, and the unit running the cycle.

IMPORTANT!

Do a Chamber Cleaning cycle every 25 cycles. Failure to clean the chamber can promote corrosion.

Replacing the HIP™ Cleaning Solution

Recommended precautionary measures:

• Wear undamaged surgical gloves and eye protection.
• After handling the product, remove and dispose of the gloves and wash hands prior to removing eye protection.

Image: An illustration showing a person wearing gloves and eye protection while handling a cleaning solution container.

Troubleshooting

Refer to Operator's Manual for a more comprehensive list. Call for service if suggested recommendations do not resolve the error message.

CF2 Chamber Filling: Water is not filling the chamber

Check that the water hoses are not kinked.

Check that water shut-off valves are opened.

CF15 Water Reservoir Overflow: Overflow switch triggered

Call for Service.

CF20 Condenser System: Unit is not able to cool down

Restart the program.

Call for Service.

CF21 Dosing System: Detergent is not dispensing

Check that the water hoses are not kinked.

Tighten detergent cap.

Check for leaks.

Call for Service.

Spare Parts and Accessories

Important Information

IMPORTANT! Terminal sterilization of instruments MUST follow processing in the HYDRIM M2 G4.

For non-invasive medical devices, SciCan recommends terminal sterilization after processing in the SciCan HYDRIM M2 G4 according to local guidelines. For invasive medical devices, such as dental handpieces, terminal sterilization must be performed after processing in the SciCan HYDRIM M2 G4.