Instruction for Chocolate Melting Machine
Thank you for buying our product, in order to ensure safe use, please read the Instructions before using and keep it for reference.
| Model | Dimensions(mm) | Volts(V) | Power(w) |
|---|---|---|---|
| SCSGH14 | 345x285x295 | 220-240/50HZ | 250 |
No. 1 Safety Precautions
The following safety precautions must be followed when using the product.
- Please read the relevant instructions carefully before using the products.
- Please do not share the same power outlet with other high-power appliances to prevent overloading and cause other hazards.
- Never touch the plate or surrounding areas while the product is working or immediately after use, as they are very hot and could result in burns.
- If children are near the machine, please take extra care when using the product. Do not leave children unattended and place the product out of their reach.
- Do not allow the product to be used unattended.
- Please do not contact the power line with sharp objects and hot surfaces, to avoid damaging the power line.
- Always check the power line and plug. If damaged, please stop using it immediately and seek professional repair or replacement.
- Do not damage, excessively bend, stretch, or twist the power line. Do not place heavy objects on the power line or pinch the power line.
- After use, turn the thermostat knob to the "0" position, and then pull the plug from the socket to avoid leakage or insulation aging shock.
- The product should be installed in a dry, clean, well-ventilated location and placed on a level surface.
- To ensure safety, the product must be grounded. Install a leakage switch for personal safety; otherwise, do not use the product.
- Please pull off the plug and wait until the product is completely cooled before moving, checking, or cleaning.
- Do not insert or unplug the plug with wet hands to avoid the risk of electric shock.
No. 2 Note for the first time use
- Please read the Instructions carefully.
- Please check if all switches are in the off position.
- Please check if all accessories are complete.
- Please tear off the protective film on the surface of the product, then clean any rust oil from the surface with a dry cloth.
- The supply voltage must match the voltage specified on this machine.
No. 3 Operating Steps
- Turn on the power switch.
- Adjust the temperature as needed.
No. 4 Care and Cleaning
- Unplug the power cable and ensure the product is completely cooled before cleaning and storage.
- Clean the cooking surface with a soft cloth or sponge dampened in a mild detergent.
- Please do not use a wire brush, stiff brush, or other corrosive liquids to clean it, to avoid damaging the surface coating.
- Never clean the product by sprinkling water or immersing it in water.
No. 5 Special Declaration
- All contents of this information have been checked carefully. In case of any misunderstanding due to printing or content errors, the company reserves the right of final explanation.
- In case of technical improvements, new specifications will be compiled into the Instructions without prior notice. If the product's appearance or color changes, please consider the actual product as the standard.
No. 6 Electrical schematic
The electrical schematic illustrates the internal wiring of the machine. Key components are:
- S1: Power switch
- S2: Temperature display
- HL1: Power indicator light (red, operates with the power switch)
- HL2: Heating element work indicator light (green)
- EH1: Heating element
