PROAIM Orion Mini Camera Geared Head (P-ORGH-MN)

Assembly Manual

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed below.

The package typically includes:

Orion Mini Geared Head
3 x Cranks Handles
3 x Screws & Washers
100mm Bowl Base
Allen Key T-Type (Size: 4mm)
Bag Packing

Orion Mini Geared Head Setup

Step 1: Prepare the Bowl Base

Detach the half bowl from the 100mm bowl base.

Step 2: Attach Half Bowl to Geared Head

Attach the half bowl to the bottom of the Orion Mini and secure it with the help of a wrench (Not Included).

The image shows the half bowl being attached to the geared head.

Step 3: Loosen Side Screw

Loosen the screw and washer from the side ends of the Orion Mini with the help of the provided Allen key.

Step 4: Attach Crank Handle

Attach the crank handle after removing the screw and washer.

Step 5: Secure Crank Handle

Secure the crank handle by attaching the screw and washer with the help of the provided Allen key.

Step 6: Secure Camera Plate

Tighten the ratchet knob on the plate to secure the camera setup.

Step 7: Mount Geared Head to Tripod

Insert the thread of the Orion Mini Geared Head into the 100mm bowl tripod stand (Not Included).

Secure the thread from the bottom with the tightening knob.

Step 8: Release and Slide Top Plate

Loosen the ratchet knob on the top plate of the Geared Head and press the push button on the other side.

Slide out the top plate.

Step 9: Attach Camera to Plate

Attach the plate to the camera base (Not Included) and tighten its bolt with a screwdriver (Not Included). Then, slide the plate onto the top of the Geared Head.

NOTE: Orion Mini Gear Head works with most DSLR Video Cameras.

Step 10: Final Securing

Tighten the ratchet knob on the plate to secure the camera setup.

Features and Operation

NOTE: The Geared Head features sturdy cranks for Panning & Tilting. The tilting crank offers one-axis movement and allows 45° tilting on each side. The panning crank offers 360° panning for accurate panoramic shots.

The geared head includes a Backlash Control Knob. Tightening this knob makes the panning crank handles tight, and loosening it allows the handles to move smoothly.

Ready for Use

The Orion Mini Geared Head setup is ready to use.

Your PROAIM Orion Mini Camera Geared Head

All dressed up and ready to go!

(Shown with optional accessories)

The image shows the PROAIM Orion Mini Camera Geared Head mounted on a tripod with a camera and accessories.

Warranty Information

PROAIM offers a one-year warranty for its products from the date of purchase. Within this period, repairs will be made without charge for labor or parts. The warranty does not cover transportation costs or damage resulting from misuse or accidental damage. Warranty repairs are subject to inspection and evaluation by PROAIM.

Liability

PROAIM is not liable for damage caused by products not supplied by PROAIM, or from mishandling during transit, accidents, misuse, neglect, lack of care, or service performed by anyone other than PROAIM.

Support

In case of any dissatisfaction, please contact PROAIM immediately. PROAIM promises its utmost support and care until you use the product.

	Proaim Orion Mini Camera Geared Head (P-ORGH-MN) Assembly Manual Assembly instructions and setup guide for the Proaim Orion Mini Camera Geared Head (P-ORGH-MN), detailing contents, assembly steps, and product features.
	PROAIM Orbiter Pan & Tilt Video Tripod Head (VH-OBTR-01) Assembly Manual Assembly instructions and feature overview for the PROAIM Orbiter Pan & Tilt Video Tripod Head (VH-OBTR-01). Learn how to set up your camera, mount fluid heads, and understand the product's key features, including 360° panning, 25° tilt, and high-grade construction. Includes warranty and liability information.
	PROAIM P-GH-30 Universal Camera Gimbal Tripod Head Assembly Manual Assembly manual for the PROAIM P-GH-30 Universal Camera Gimbal Tripod Head. Learn how to mount, set up, and balance your camera for professional photography and videography.
	PROAIM Rocker Camera Plate System (P-RCPL-01) - Setup and Features Guide A comprehensive guide detailing the setup, assembly, and features of the PROAIM Rocker Camera Plate System (P-RCPL-01). Learn how to attach the handle, mount to a dolly, and connect your camera.
	PROAIM Spin-3 (3-Axis) Motorized Pan Tilt Head Assembly Manual Assembly manual for the PROAIM Spin-3 (PT-SPIN-3) 3-Axis Motorized Pan Tilt Head. Covers unboxing, mounting, camera setup, cable assembly, balancing procedures, and system testing.
	PROAIM Z-Tilt Camera Head (Pan-Tilt) P-ZTLT-01 Assembly Manual Assembly manual for the PROAIM Z-Tilt Camera Head (Pan-Tilt) model P-ZTLT-01. Learn how to mount and set up your camera head for optimal use with tripods and sliders.
	PROAIM Astra 4ft Camera Jib Crane (JB-AS04-00) - Assembly and Setup Guide Detailed assembly and setup manual for the PROAIM Astra 4ft Camera Jib Crane (Model JB-AS04-00). Learn how to assemble, set up your camera, counterweight, and LCD monitor. Includes warranty information.
	PROAIM PT-GOLD Pan Tilt Head Assembly and Operation Guide This assembly manual provides detailed instructions for setting up, balancing, and operating the PROAIM Gold Pan Tilt Head (PT-GOLD) with joystick control for camera cranes and tripods.