Etac Cross 5 Active Assembly Instructions

Section 1: Etac Cross 5 Active Assembly

Etac Cross

This section details the assembly of the Etac Cross 5 Active component. It shows a part being attached to a tube.

Diagram Description: The diagram illustrates the correct and incorrect placement of a component onto a tube. The left inset shows correct alignment, indicated by a checkmark (✔️). The right inset shows incorrect alignment, indicated by a cross (❌).

Torque Specification: Maximum 5 Nm (Newton-meters)

Section 2: Etac Cross 5 Anti-Tip Device Installation

This section illustrates the assembly of the Etac Cross 5 anti-tip device onto the wheelchair frame. It shows multiple parts and screws being attached.

Diagram Description: The diagram shows the process of attaching the anti-tip device components to the wheelchair frame. Screws are depicted, and two connection points are labeled 'A' and 'B'.

Section 3: Wheelchair Measurement and Final Attachment

This section provides a measurement guide for positioning the wheelchair and shows the final attachment of the anti-tip device.

Diagram Description: A diagram shows a wheelchair with a measurement indicator of 3-7 cm. Following this, an illustration demonstrates the anti-tip device being attached to the wheelchair frame, with arrows indicating the direction of movement for installation.