Bomann KSG 7286 Household Beverage Cooler

Introduction

Thank you for choosing our product. We hope you will enjoy using the appliance.

Symbols in these instructions for use

Important information for your safety is specially marked. It is essential to comply with these instructions to avoid accidents and prevent damage:

• ⚠️ WARNING: This warns you of dangers to your health and indicates possible injury risks.
• CAUTION: This refers to possible hazards to the machine or other objects.
• [Note]: This highlights tips and information.

General notes

Read the operating instructions very carefully before putting the appliance into operation and keep the instructions including the warranty and the receipt. If you give this appliance to other people, also pass on the operating instructions.

• [Note]: Due to constant product modifications, your appliance may differ slightly from these operating instructions; functions and methods of use remain unchanged.
• The illustrations in these operating instructions are for illustrative purposes only and may differ from the original appliance.
• The appliance is designed exclusively for private use and for the envisaged purpose. This appliance is not fit for commercial use.
• The appliance is only to be used as described in the user manual. Do not use the appliance for any other purpose. Any other use is not intended and can result in damages or personal injuries.
• This appliance is not intended to be used as a built-in appliance.
• Do not use it outdoors. Keep it away from sources of heat, direct sunlight and humidity.
• When not in use, for cleaning, user maintenance works or with disruption, switch off the appliance and disconnect the plug (pull the plug itself, not the lead) or turn off the fuse.
• The appliance and if possible the mains lead have to be checked regularly for signs of damage. If damage is found the appliance must not be used.
• For safety reasons, alterations or modifications of the appliance are prohibited.
• To ensure your children's safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.

⚠️ WARNING: Do not allow small children to play with the foil. There is a danger of suffocation!

Special safety information for this unit

This unit is intended to be used in household and similar applications such as:

• Staff kitchen areas in shops, offices and other working environments;
• Farm houses and by clients in hotels, motels and other residential type environments;
• Bed and breakfast type environments;
• Catering and similar non-retail applications.

⚠️ WARNING:

• Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
• When positioning the appliance, ensure the supply cord is not trapped or damaged.
• Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.
• Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
• Do not damage the refrigerant circuit.
• Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
• Do not store explosive substances such as aerosol containers with flammable propellant in the appliance.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children unless they are older 8 years and supervised.
• [Note]: Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances.
• Do not repair the appliance by yourself, always consult an authorized specialist. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. In case of damage, the appliance must not be used!
• Use the provided collection points of electrical equipment for the disposal of the appliance.

⚠️ WARNING: Risk of fire / flammable materials

The coolant circuit of this unit contains the refrigerant Isobutane (R600a), a natural gas that is flammable and of high environmental compatibility. Make sure no parts of the coolant circuit get damaged during transport and installation of the appliance.

If the coolant circuit is damaged:

• Avoid any open flames or ignition source.
• Disconnect the plug.
• Thoroughly air the room in which the appliance is installed.
• Contact an authorized technician.

Transport and packaging

Transport the appliance

Transport the appliance, if possible, in vertical position. Otherwise, it is absolutely necessary to allow the appliance standing upright for a few hours before installation "Prior to first use”. Protect the appliance during transport against weather influences.

Unpacking the appliance

• Remove the appliance from its packaging.
• Remove all packaging material, such as foils, filler and cardboard packaging.
• Dispose of packaging materials that are no longer required in accordance with the locally applicable regulations.
• To prevent hazards, check the appliance for any transport damage.

[Note]: Production residue or dust may have collected on the appliance. We recommend cleaning the appliance according to chapter "Cleaning and maintenance".

Appliance equipment

Appliance overview

Front View: The appliance features a glass door allowing visibility of the contents. Inside, there are grid shelves for storage. The interior light illuminates the contents.

Back View: Components include the temperature control, on/off switch, and feet for leveling.

Delivery scope

• 1x grid shelf

Installation

Conditions for the installation location

• Good ventilation is required around the appliance to dissipate heat properly and ensure efficient cooling operation at low power consumption. Enough clearance is necessary: approximately 50-70 mm at the back, and a minimum of 100 mm to the side walls and above the appliance.
• Place the appliance so that the appliance door can open without being impeded.
• Only install at a location with an ambient temperature suitable for the climate class of the appliance. The climate class (N: 16°C to 32°C) can be found under "Technical data" and on the rating label.
• Place the appliance on a steady and safe surface. If the appliance is not horizontally leveled, adjust the feet accordingly.
• Avoid installation near heaters, stoves, direct sunlight, or other heat sources.
• Avoid locations with high humidity (e.g., bathrooms), as metal parts may corrode.
• Avoid locations near volatile or flammable materials (e.g., gas, fuel, alcohol, paint) or in rooms with poor air circulation (e.g., garages).
• Do not expose the appliance to any weather.

Leveling the appliance

Slight unevenness in the floor can be leveled out using the front feet. Check if the appliance is leveled horizontally and adjust the feet if necessary.

Electrical connection

⚠️ WARNING:

• Installation to the mains supply must conform to local standards and regulations. Improper connection may cause electric shock!
• Do not modify the appliance plug. If the plug does not fit properly to the outlet, have a proper outlet installed by an authorized specialist.
• The power plug must be accessible to disconnect the appliance from the power supply in case of emergency.
• Ensure the voltage supply matches the specifications on the rating label before connecting.
• Connect the mains cable to a properly installed and earthed wall outlet.
• If the plug is not accessible after installation, a corresponding disconnect device must be available to meet safety regulations.

Reversing the door opening

If required, the door opening can be moved from the right (supplied condition) to the left side.

⚠️ WARNING: When replacing the door stop, the appliance must be disconnected from the power supply first.

[Note]: Ask another person to assist. You may need a screw wrench, Phillips screwdriver, and a thin-blade screwdriver.

Steps:

1. Remove the plastic rivet [1] and hinge cover [2].
2. Loosen the screws [3] and remove the door hinge [4]. Lift the unit door from the door hinge [6].
3. Displace the dummy plug [5] of the appliance door. Place the appliance door safely aside.
4. Tilt the unit slightly backwards and block it in this position.
5. Disassemble the lower door hinge [6] including the foot by loosening the screws [7]. Unscrew the separate foot [8].
6. Displace and fasten the door hinge [6] including the foot with the screws [7] accordingly. Screw in the separate foot [8].
7. Return the unit to the upright position. Place the appliance door on the hinge pin and fix it in the intended position.
8. Displace and fasten the upper door hinge [4] with the screws [3] accordingly.
9. Put the plastic rivet [1] in the exposed hole and replace the hinge cover [2].
10. Check that the door is aligned vertically and horizontally to ensure proper opening and closing.

Startup / Operation

Intended use

The appliance is intended for private/household use. It is exclusively suitable for cooling and storing drinks. This cooling unit is not suitable for freezing food!

Prior to first use

CAUTION: After transport, the appliance should be left standing upright for four hours before connecting to the power supply. Nonobservance could lead to malfunction of the cooling system and cause an appliance breakdown.

Clean the appliance interior including all accessory parts. Refer to the "Cleaning and maintenance" chapter.

Starting the appliance

• Connect the appliance to the power supply.
• Set the operating conditions. See also the following sections.

Settings

The power levels [1-5] regulate the different values of the internal temperature:

*Beware of high setting because the maximum level may already mean "freezing point".

Basically, the temperature changes depending on the ambient temperature (place of installation), the frequency of opening the door, and the equipment. For initial operation, set the lowest possible internal temperature (= highest power level) until the appliance has reached the desired operating temperature. It is recommended to reset to a medium power level afterwards, allowing for easier temperature correction. A high power level also increases energy consumption.

The recommended cooling temperature for optimized storage is approximately 12 degrees Celsius.

Interior light

The indoor light is switched on or off via the on/off switch at the appliance back.

Equipment

Note that the equipment varies depending on the appliance type. The various shelves or drawers can be height-adjusted (partially and model-dependent) or removed for individual storage. This is also practical for cleaning purposes.

[Note]: For the most efficient use of energy, place all shelves/drawers in their original positions.

Storing

Several storage levels for inserting the grid shelf allow individual storage.

Loading examples:

• 44 cans à 330 ml (70 x 120 mm)
• 32 bottles à 500 ml (70 x 170 mm)

Store large bottles horizontally, with the opening facing forward on the grid shelf.

Removing / inserting the shelves

• To remove, open the unit door completely, lift the shelf, if necessary, slant slightly and pull it out to the front.
• Safely reinsert the shelf at the desired height and push it in until the stop is reached.

Operating noise

Cleaning and maintenance

Switching off

To switch off the appliance, disconnect the appliance from the power supply. If the appliance is out of use for long periods:

• Remove the appliance content.
• Defrost (model dependent) and clean the appliance thoroughly (see "Cleaning and maintenance").
• Leave open the appliance door to avoid formation of mold and unpleased odors.

Tips for energy saving

• Disconnect the appliance from the power supply if it isn't in use.
• Do not install the appliance near stoves, heaters or other heat sources. In case of higher ambient temperatures, the compressor will run more frequently and longer.
• Ensure enough ventilation at the bottom and rear side. Never block ventilation openings.
• Place all shelves, racks or drawers (depending on model) in their original position.
• Adjust the temperature not colder than necessary.
• Allow warm food to cool before placing it in the appliance.
• Open the appliance door only as necessary.
• Defrost the unit regularly (model dependent).
• Switch on the lighting only if necessary.
• The seal of the appliance door must be completely intact, so that the door closes properly.

⚠️ WARNING:

• Always disconnect the appliance from the power supply before cleaning and user maintenance.
• Do not use steam cleaners for cleaning the appliance; moisture could enter electrical components. Risk of electric shock! Hot steam could damage the plastic parts.
• The unit must be dry before restarting operation.

CAUTION:

• Do not use a wire brush or other sharp, abrasive items.
• Do not use any acidic or abrasive detergents.
• Do not damage the refrigerant circuit.

Cleaning the appliance including interior

To keep dirt and germs at bay, clean the appliance regularly!

• First clear out the contents of the appliance and store it in a cool place. Remove all moving parts such as shelves or drawers.
• Clean the interior of the appliance, the exterior surfaces and the accessories with lukewarm water and a mild cleaning agent; or with a clean, damp microfiber cloth without cleaning agent.
• Clean the thaw water discharge channel / opening carefully, e.g. with a pipe cleaner.
• After everything has dried thoroughly, you can put the appliance back into operation.
• Depending on the model: At least once a year, wipe off the dust that has accumulated on the rear wall of the unit and on the condenser (metal grille). Use a soft brush or a vacuum cleaner for this purpose.

Cleaning / replacing the door seal

Regularly check the seal for dirt, damage and air tightness!

Checking the seal for air tightness

• Clamp a thin piece of paper at various points for testing. The paper must be equally difficult to pull through at all points.

Cleaning the gasket

• Clean the gasket with clear water only!
• CAUTION: Grease and oil makes the seal porous and brittle. Wipe up grease or oil immediately with a damp, clean cloth.

Replacing the seal

• Remove the contents of the appliance and, if necessary, defrost the unit. Pay attention to how the old gasket is attached. Most gaskets are only plugged in.
• Remove the worn gasket rubber by removing it from the groove. Carefully clean the appliance door and the groove below the rubber and remove any adhesive residue.
• Attach the new rubber. If necessary, heat the rubber seal with a hair dryer or hot water and shape it by hand. Start pressing the gasket in one corner and then press it around the door into the groove provided for this purpose.
• Continue to check the seal regularly for dirt and damage!

Defrosting

CAUTION: Never use metal objects (e.g., knives) to remove ice from the evaporator. Otherwise, it can be damaged.

To achieve better cooling and to save energy, defrost the appliance regularly:

• To initiate the defrosting process, disconnect the appliance from the power supply.
• Remove the contents of the appliance and store everything covered in a cool place.
• Once the ice has melted, wipe up the condensation and dry the inside of the appliance.
• Then you can put the appliance back into operation by connecting it to the power supply and adjusting the temperature control.

Changing the light

CAUTION: Do NOT remove the cover of the light. The LED light may be replaced / repaired in case of failure / defect only by an authorized specialist.

Replacing the door hinge

If the appliance door starts to stutter, crack or jam when you open it, it is probably due to a worn or damaged hinge. It is recommended to replace all door hinges at the same time, otherwise the next repair will soon be beckoning.

• Remove the contents of the appliance and the movable interior parts.
• Tilt the appliance backwards and block it in this position to prevent the door from sliding out.
• Loosen the hinge cover, as described under "Reversing the door opening" and disassemble the upper door hinge.
• Turn out the stand and disassemble the lower door hinge.
• The respective hinge assembly is carried out in reverse order.
• Open and close the appliance door for a test run, readjust the hinges if necessary. In any case, make sure that the door fits tightly and accurately.

Troubleshooting

Before you contact an authorized specialist

[Note]: If a problem persists after following the steps above, contact your trader or an authorized technician.

Technical data

• Climate class N: This appliance is intended to be used at ambient temperature ranging from 16°C to 32°C.
• Electrical connection: Power voltage: 220-240 V~ / 50 Hz; Rated power: 85 W; Rated current: 0.5 A.
• Dimensions (H x W x D): 51.0 x 43.0 x 47.5 cm.
• Net weight: approx. 17.5 kg.

For more information about the product, scan the QR code on the supplied energy label and/or visit the official website of the product data bank: https://eprel.ec.europa.eu

The right to make technical and design modifications during continuous product development remains reserved. This appliance has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations.

Warranty / Customer Service

Warranty conditions

1. For consumers, a warranty of 24 months from the date of purchase is granted for private use. For commercial use, the warranty is 6 months. Consumer warranty is reduced to 6 months if the appliance, suitable for commercial use, is used commercially, even partially.
2. Warranty services require purchase in Germany and electronic submission of a copy of the proof of purchase. If the appliance is abroad during a warranty claim, it must be made available for warranty services at the buyer's expense.
3. Defects must be reported in writing within 14 days of becoming apparent. If the warranty claim is justified, the manufacturer will decide whether to repair or replace the damage/defect with an equivalent appliance.
4. Warranty services do not cover defects resulting from non-compliance with the operating instructions, improper handling, or normal wear and tear.
5. Warranty claims are also excluded for easily breakable parts, such as glass or plastic. Warranty claims are excluded if work is performed by unauthorized parties.
6. Warranty services do not extend the warranty period. There is no entitlement to new warranty services. This warranty declaration is a voluntary service by the manufacturer. Statutory warranty rights (rectification, withdrawal, damages, reduction) are not affected by this warranty.

Warranty handling

If your appliance shows a defect within the warranty period, you can register it for free warranty handling via our service portal. Visit www.bomann-germany.de/service and click on Customer Service. Follow the instructions for warranty handling.

After completing the registration, you will receive a shipping ticket via email, along with further information regarding your claim. Attach the shipping ticket to the carton of your well-packaged appliance and hand it in at the nearest drop-off point of our parcel service. Please upload a copy of your proof of purchase (receipt, invoice, delivery note) as warranty proof during registration, otherwise free warranty services cannot be provided.

Further information is available at www.bomann-germany.de/service:

• A download area for operating manuals, catalogs, and product-specific downloads (e.g., EU data sheets).
• Access to our spare parts and accessories shop.
• An overview of current customer information.

Spare parts

The following functional spare parts and spare parts lists are available from the customer service mentioned below (model dependent).

• Parts that may only be serviced by a specialist or our customer service: (1) Thermostats, temperature sensors, circuit boards, and light sources.
• Parts that can be serviced by the user: (2) Seals, handles, hinges, shelves, and inserts.

Spare parts are stocked according to legal requirements:

• Spare parts are available for 7 years after the last unit of a model is put on the market.
• Seals are available for 10 years after the last unit of a model is put on the market.

ASCI Elektro Service Vertriebs GmbH
Schachtweg 57
31036 Eime
Mail: bomann@asci-elektro-service.de
Tel: 0800 / 96 36 800

For instructions on replacing selected spare parts available for this model, refer to the content of this operating manual.

Disposal

Meaning of the "[Waste Bin Symbol]"

Protect our environment; electrical equipment does not belong in household waste. Use the collection points provided for the disposal of electrical equipment and hand in your electrical appliances that you will no longer use.

This helps to avoid potential impacts on the environment and human health from incorrect disposal. You are contributing to the recovery, recycling, and other forms of utilization of electrical and electronic equipment.

Information on where appliances can be disposed of can be obtained from your local authority. Your dealer and contractual partner is also obliged to take back the old appliance free of charge.

⚠️ WARNING: Remove or disable any existing snap and bolt locks if you take the appliance out of operation or dispose it.