Bomann GS 7343 Household Freezer

Introduction

Thank you for choosing our product. We hope you will enjoy using the appliance.

Symbols in these Instructions for Use

Important information for your safety is specially marked. It is essential to comply with these instructions to avoid accidents and prevent damage.

⚠️ WARNING: This warns you of dangers to your health and indicates possible injury risks.

❗ CAUTION: This refers to possible hazards to the machine or other objects.

? NOTE: This highlights tips and information.

General Notes

Read the operating instructions very carefully before putting the appliance into operation and keep the instructions including the warranty and the receipt. If you give this appliance to other people, also pass on the operating instructions.

? NOTE:

• Due to constant product modifications, your appliance may differ slightly from these operating instructions; Functions and methods of use remain unchanged.
• The illustrations in these operating instructions may differ from the original appliance.
• The appliance is designed exclusively for private use and for the envisaged purpose. This appliance is not fit for commercial use.
• The appliance is only to be used as described in the user manual. Do not use the appliance for any other purpose. Any other use is not intended and can result in damages or personal injuries.
• This appliance is not intended to be used as a built-in appliance.
• Do not use it outdoors. Keep it away from sources of heat, direct sunlight and humidity.
• When not in use, for cleaning, user maintenance works or with disruption, switch off the appliance and disconnect the plug (pull the plug itself, not the lead) or turn off the fuse.
• The appliance and if possible the mains lead have to be checked regularly for signs of damage. If damage is found the appliance must not be used.
• For safety reasons, alterations or modifications of the appliance are prohibited.
• To ensure your children's safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.

⚠️ WARNING: Do not allow small children to play with the foil. There is a danger of suffocation!

Special Safety Information for this Unit

This unit is intended to be used in household and similar applications such as:

• Staff kitchen areas in shops, offices and other working environments;
• Farm houses and by clients in hotels, motels and other residential type environments;
• Bed and breakfast type environments;
• Catering and similar non-retail applications.

⚠️ WARNING:

• Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
• Do not use mechanical devices or other means to accelerate the defrosting process (if necessary), except those described in this manual (depending on the model included the scope of delivery).
• Do not damage the refrigerant circuit.
• Do not operate any electrical devices inside the appliance.
• Do not store explosive substances such as aerosol containers with flammable propellant in the appliance.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by children unless they are older 8 years and supervised.

? NOTE: Children aged from 3 to 8 years are allowed to load and unload refrigerating appliances.

When positioning the appliance, ensure the supply cord is not trapped or damaged.

Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.

Do not try to repair the appliance on your own. Always contact an authorized technician. To avoid the exposure to danger, always have faulty cable be replaced only by the manufacturer, by our customer service or by qualified person and with a cable of the same type.

Use the provided collection points of electrical equipment for the disposal of the appliance.

Coolant

⚠️ WARNING: Risk of fire / flammable materials

The coolant circuit of this unit contains the refrigerant Isobutane (R600a), a natural gas that is flammable and of high environmental compatibility. Make sure no parts of the coolant circuit get damaged during transport and installation of the appliance.

If the coolant circuit is damaged:

• Avoid any open flames or ignition source,
• Disconnect the plug,
• Thoroughly air the room in which the appliance is installed and
• Contact an authorized technician.

Transport and Packaging

Transport the appliance

Transport the appliance, if possible, in vertical position. Otherwise, it is absolutely necessary to allow the appliance standing upright for a few hours before installation "Prior to first use". Protect the appliance during transport against weather influences.

? NOTE: The appliance has castors which facilitate the transport and installation of the appliance. Tilt the appliance back slightly and move it gently.

Unpacking the appliance

• Remove the appliance from its packaging.
• Remove all packaging material, such as foils, filler and cardboard packaging.

The packaging materials are environmentally friendly and recyclable. Dispose of packaging materials that are no longer required in accordance with the locally applicable regulations.

To prevent hazards, check the appliance for any transport damage.

In case of damage, do not put the appliance into operation. Contact your distributor.

? NOTE: Production residue or dust may have collected on the appliance. We recommend cleaning the appliance according to chapter "Cleaning and Maintenance".

Installation

Conditions for the installation location

Good ventilation is required around the appliance to dissipate the heat properly and to guarantee efficient cooling operation at low power consumption. Enough clearance is necessary.

• Gap to the back approx. 50-70 mm, to the side walls and above the appliance each approx. min. 100 mm;
• Place the appliance so that the appliance door can open without being impeded.

Appliance Equipment

Appliance overview:

1 Control panel, 2 Open drawers, 3 Freezing drawers, 4 Feet

Delivery scope: 5x freezing drawer, 1x ice-cube tray, for reversing the door opening: 1x door stopper

Only install at a location with an ambient temperature suitable for the climate class of the appliance. The climate class can be found under "Technical Data" and on the rating label located in the interior or on the appliance rear.

Place the appliance on a steady and safe surface. If the appliance is not horizontally leveled, adjust the feet accordingly.

Avoid the installation:

• Near heaters, next to a stove, direct sunlight or any other heat sources;
• At locations with high humidity (e.g. outdoors, bathroom), as metal parts would be susceptible to corrosion under such circumstances;
• Near volatile or flammable materials (e.g. gas, fuel, alcohol, paint, etc.), in rooms which may have poor air circulation (e.g. garages).
• Do not expose the appliance any weather.

Leveling the appliance

Slight unevenness in the floor can be leveled out using the front feet. Check whether the appliance is leveled horizontally. If the unit is not in balance, the feet must be adjusted.

Electrical connection

⚠️ WARNING:

• The installation to the mains supply must conform to the local standards and regulations. Improper connection may cause to an electric shock!
• Do not modify the appliance plug. If the plug does not fit properly to the outlet, let install a proper outlet by an authorized specialist.
• The accessibility of the power plug must be ensured to disconnect the appliance from the power supply in case of emergency.
• Make sure that the voltage supply matches the specifications on the rating label before connecting.
• Connect the mains cable to a properly installed and earthed wall outlet.
• If the plug after installation is not accessible, a corresponding disconnect device must be available to meet the relevant safety regulations.

Reversing the door opening

If required, the door opening can be moved from the right (supplied condition) to the left side.

⚠️ WARNING: When replacing the door stop, the appliance must be disconnected from the power supply first.

? NOTE:

• Ask another person to assist.
• You possibly need: screw wrench, Phillips screwdriver as well as a thin-blade screwdriver.
• *Delivery scope! Keep the parts to be replaced for another possible door stop change.

[Detailed textual description of door hinge reversal steps from diagrams will be integrated here]

Startup / Operation

Prior to first use

❗ CAUTION: After transport, the appliance should be left standing upright for four hours before connecting to the power supply. Nonobservance could lead to malfunction of the cooling system and causes an appliance breakdown.

Clean the appliance interior including all accessory parts. Consider the instructions which we provide in the chapter "Cleaning and Maintenance".

Control panel / Function description

[Description of control panel buttons and indicators]

Temperature setting

Press the SET button several times to set the desired temperature in the range from -14°C to -22°C. The recommended operating temperature is -18°C.

The corresponding indicator light flashes: -14°C → -16°C → -18°C → -20°C → -22°C. Approx. 5 seconds after the last button press, the setting is saved.

Super freezing function

Keep pressing the SET button for approx. 3 seconds to activate / deactivate the super freezing function. The control light ? indicates the activation. When the super freezing function is activated, the appliance operates at maximum power to speed up the freezing process.

The super freezing function switches off automatically after approx. 50 hours. The internal temperature adjusts to the preset temperature. The function can be terminated at any time before the switch-off time has elapsed.

Alarm function

The appliance is equipped with a warning system to prevent the temperature from rising unnoticed and to prevent energy loss when the appliance door is open.

..when the appliance door is open

As soon as the appliance door remains open for more than 90 seconds, a signal tone sounds 5 times every 30 seconds. Press the SET button or close the appliance door to stop the alarm.

..in case of temperature rise

In case of a malfunction of the appliance or a longer period without power supply, the internal temperature may rise. If the temperature rises above -6°C, a signal tone sounds 5 times every 5 seconds and the indicator lights flash.

As soon as the temperature drops below -10°C again, or if you press the SET button prematurely, the alarm is switched off.

Starting the appliance

• Connect the appliance to the power supply.
• Set the operating conditions. See also the following sections.

Settings

Basically, the temperature changes depending on the ambient temperature (place of installation), the frequency of opening the door and the equipment.

For initial operation, first set the lowest possible internal temperature (= highest power level) or the super freezing function until the appliance has reached the desired operating temperature. It is recommended to reset to a medium power level afterwards, then you can easily make any temperature correction.

? NOTE: In generally a medium power level works best for an optimized food storage. A high power level also increases the energy consumption.

Storing food

? NOTE: Recommendation! To guarantee that the temperature is low enough, you should pre-cool the appliance a few times before initial loading foods.

❗ CAUTION: Always pay attention to the storage instructions on the sales packaging.

The 4-star freezer allows you to store frozen food at a temperature of ≤ -18°C for several months; to produce ice cubes and to freeze fresh food.

To avoid contamination of food, respect the following instructions:

• Opening the door for long periods can cause a significant increase of the temperature in the compartments of the appliance.
• Clean regularly surfaces that can come in contact with food and accessible drainage systems (see "Cleaning and Maintenance").
• Store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.
• Two-star frozen-food compartments are suitable for storing pre-frozen food, storing or making ice-cream and making ice-cubes.
• One-, two-, or three-star compartments are not suitable for the freezing of fresh food.
• If the appliance is out of use for long period, follow the instructions under "Switching off".

Storage space

Depending on requirements, shelves/drawers can be removed (partially and depending on model) to optimize the storage space or for cleaning purposes.

? NOTE: For the most efficient use of energy, place all shelves/drawers according to delivery condition.

Freezing

Fresh food should be frozen as fast as possible to the core. During freezing operation, the temperature of fresh food should be lowered as fast as possible to keep formation of ice crystals as little as possible and not to damage the food structure.

Keep a space between the individual items, so that the cold air can circulate.

Storing frozen food

Packed frozen merchandise should be stored in accordance with the manufacturer's data. Make sure the food items do not defrost after purchase and to store them as fast as possible in the freezer.

It is possible to store food for longer periods of time. The period might vary, so observe the storage information on the packaging of the merchandise.

General safety precautions

• Do not store bottles or cans. These can break when the contents freeze – or even explode if they contain carbonated drinks.
• Once products have been defrosted halfway or completely, they should be consumed as soon as possible and should not be frozen again, except they have been processed to a ready meal.
• Do not eat food that is still frozen. Do not eat ice cream directly from the freezer. The cold can cause injuries in the oral cavity.
• Touching metal parts inside the unit can cause symptoms like burns if the skin is very sensitive.
• Never touch frozen food with moist or wet hands.

Pack frozen food

Always select packaging suitable for the food and pack it properly.

• Freeze in portions. Suitable for packaging are e.g. plastic films, polyethylene tubular films, aluminum foil, freezer cans.
• The packaging must be impermeable to air and moisture.
• Press the air out of the package.
• Seal the package tightly with e.g. rubber rings, plastic clips, twine or cold-resistant adhesive tapes.
• Label the package with contents and freezing date.

Storage times

The indicated storage times are guide values for the storage duration of various food groups in the freezer.

For commercial frozen products, the storage period indicated on the packaging is decisive.

Operating noise

Switching off

To switch off the appliance, disconnect the appliance from the power supply.

If the appliance is out of use for long periods:

• Remove the appliance content.
• Defrost (model dependent) and clean the appliance thoroughly (see "Cleaning and Maintenance").
• Leave open the appliance door to avoid formation of mold and unpleased odors.

Tips for energy saving

• Disconnect the appliance from the power supply if it isn't in use.
• Do not install the appliance near stoves, heaters or other heat sources. In case of higher ambient temperatures, the compressor will run more frequently and longer.
• Ensure enough ventilation at the bottom and rear side. Never block ventilation openings.
• Place all shelves, racks or drawers (depending on model) in their original position.
• Adjust the temperature not colder than necessary.
• Allow warm food to cool before placing it in the appliance.
• Open the unit door only as necessary.
• Defrost the unit regularly (model dependent).
• The seal of the appliance door must be completely intact, so that the door closes properly.

Cleaning and Maintenance

⚠️ WARNING:

• Always disconnect the appliance from the power supply before cleaning and user maintenance.
• Do not use steam cleaners for cleaning the appliance; moisture could enter electrical components. Risk of electric shock! Hot steam could damage the plastic parts.

⚠️ WARNING: The unit must be dry before restarting operation.

❗ CAUTION:

• Do not use a wire brush or other sharp, abrasive items.
• Do not use any acidic or abrasive detergents.
• Do not damage the refrigerant circuit.

Cleaning the appliance including interior

• Clean the appliance interior, the exterior surfaces, the accessories and the door seal regularly with warm water and mild detergent; or with a clean, damp microfiber cloth without cleaning agent.
• Remove the appliance content and storage it at a cool location.
• After everything was thoroughly dried, you can restart the operation.
• Depending on model: Wipe at least once a year the dust that has accumulated on the appliance back and condenser (metal grille). To do this, use a soft brush or a vacuum cleaner.

Defrosting

The appliance remains ice-free thanks to the fully automatic No-Frost-system. Defrosting is not necessary.

Troubleshooting

Before you contact an authorized specialist

? NOTE: If a problem persists after following the steps above, contact your trader or an authorized technician.

Technical Data

Climate class SN/N/ST/T: this appliance is intended to be used at ambient temperature ranging from 10°C to 43°C.

Electrical connection............................................

Power voltage: .........................220-240 V~ / 50 Hz

Rated (defrost) power: ................................140 W

Rated current: ...............................................1.3 A

Dimension H x W x D / Weight...............................

Appliance size: .....................143.0 x 54.0 x 60.0 cm

Net weight: ..................................approx. 41.0 kg

For more information about the product, scan the QR code on the supplied energy label and/or visit the official website of the product data bank: https://eprel.ec.europa.eu

The right to make technical and design modifications during continuous product development remains reserved.

This appliance has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations.

Disposal

Meaning of the "Dustbin" Symbol ?️

Protect our environment; do not dispose of electrical equipment in the domestic waste.

Please return any electrical equipment that you will no longer use to the collection points provided for their disposal.

This helps avoid the potential effects of incorrect disposal on the environment and human health. This will contribute to the recycling and other forms of reutilization of electrical and electronic equipment.

Information concerning where these can be disposed of can be obtained from your local authority. Your dealer and contractual partner is also obliged to take back the old appliance free of charge.

⚠️ WARNING: Remove or disable any existing snap and bolt locks if you take the appliance out of operation or dispose it.

General repair instructions for refrigerators / freezers

You will find general information on the replacement of certain spare parts. The illustrations and repair or replacement instructions depend on the type of appliance and may differ slightly from the original appliance.

Liability for damage is excluded if the repair instructions are not followed correctly.

⚠️ WARNING: During repair/maintenance work, the appliance must NOT be connected to the mains power!

Replacing the door seal

• Remove the contents of the appliance and, if necessary, defrost the appliance. Pay attention to how the old seal is fixed. Most gaskets are only plugged in or fixed by small screws.
• Remove the worn gasket rubber by either removing it from the plug-in device or loosening the screws. Carefully clean the appliance door and the groove below the rubber and remove any adhesive residue.
• Depending on how the old sealing rubber was attached, attach the new rubber. If necessary, heat the sealing rubber with a hair dryer or hot water and shape it by hand. Start pressing the gasket in one corner and then press it all around the door into the provided socket.
• According to the type of appliance, refasten the screws or plug-in positions on the appliance.
• Continue to check the door seal regularly for dirt and damage!

Replacing the door handle

• Loosen the screw cover caps.
• Unscrew the screws.
• Remove the door handle.
• Door handle assembly is performed in reverse order.

Replacing the door hinges

• Remove the contents of the appliance and the interior fittings.
• Tilt the appliance backwards and block it in this position to prevent the appliance doors from sliding out.

Replacing the upper door hinge

• Depending on the type of appliance, first loosen and remove the appliance or hinge cover.
• Disassemble the upper door hinge by loosening the screws.
• Door hinge assembly is performed in reverse order.

Replacing the middle door hinge

• First disassemble the upper door hinge "Replacing the upper door hinge".
• Remove the upper appliance door and place the door safely aside.
• Disassemble the middle door hinge by loosening the screws.
• Door hinge assembly is performed in reverse order.

Replacing the lower door hinge

• Depending on the appliance type, first unscrew the stand foot.
• Disassemble the lower door hinge by loosening the screws.
• Door hinge assembly is performed in reverse order.

Replacing the shelves/drawers

Depending on the appliance type and equipment, the various shelves and drawers can be removed and replaced.

Replacing the glass/bottle shelf

• If necessary, lift the shelf, slant slightly and pull it out to the front.
• Safely slide/insert the shelf in reverse order.

Replacing the door shelf

• Lift the door shelf until it releases from the retainer and remove it.
• Place the door shelf flat, press down both sides of the shelf at the same time so that it locks into the retainer.

Replacing the drawers

• Remove the drawer to the front, incline it if necessary and remove it (Fig. 1).
• For a drawer that can be pulled out on telescopic rails, first pull it out completely and remove it to the top (Fig. 2).
• Insert the drawer, if necessary, lift the front part of the drawer slightly and push it in completely. Make sure that the drawer is fitted into the guide rails.