ZYXEL PX3321-T1 AX3000 WiFi 6 GPON VoIP Gateway

Quick Start Guide

Package Contents

PX3321-T1 Unit
Power Cable
Ethernet Cable
Phone Cable
Quick Start Guide
Declaration of Conformity
Support Information

Support Information

For detailed information, customer support, and safety warnings, please refer to the User's Guide available at www.zyxel.com.

Technical support can be accessed via https://service-provider.zyxel.com/global/en/tech-support.

EU Importer

Zyxel Communications A/S, Gladsaxevej 378, 2. th. 2860 Søborg, Denmark. Visit: www.zyxel.com/dk/da

US Importer

Zyxel Communications, Inc., 1130 North Miller Street Anaheim, CA 92806-2001. Visit: www.zyxel.com/us/en

Step 1: Hardware Installation

Warning: To avoid possible eye injury, do NOT look into an operating fiber module's connector.

Connection Steps:

PON Port: Connect the fiber optic cable from your service provider's network to the PON port. Carefully coil the fiber optic cable from inside to outside, ensuring it goes under the tabs to keep it in place. The fiber optic cable should not exceed 2.5 meters in length and 3.0 mm in outer diameter.
Power: Connect the power cable to the PX3321-T1 and press the power button.
LAN Port: Connect a computer to the LAN port using the provided yellow Ethernet cable.
PHONE Port: Connect a phone to the PHONE port using the provided phone cable.

LED Indicators:

LED	Status	Description
POWER	Green On	Power on and system ready
POWER	Blinking (slow)	Booting
POWER	Blinking (fast)	Boot up fail
POWER	Off	Power off
PON	Green On	PON connection ready
PON	Blinking	Trying to link up
PON	Red On	PON transceiver power down
PON	Red Blinking	PON transceiver low power alarm
PON	Off	Not receiving optical signal normally
LOS	Off	PON connection ready
Internet	Green On	WAN connection is up
Internet	Red Blinking	Transmitting/receiving data
Internet	Off	WAN connection is down or in bridge mode
LAN1-LAN4	Green On	Ethernet link is up
LAN1-LAN4	Green Blinking	Transmitting/receiving data
LAN1-LAN4	Off	Ethernet link is down
PHONE	Green On	SIP account registered, telephone on-hook and idle
PHONE	Green Blinking	Telephone off-hook or incoming call
PHONE	Off	SIP account not registered, telephone on-hook and idle, or VoIP is off, or power is off

Step 2: WiFi Connection

Using SSID:

The SSID (network name) and wireless key (password) are printed on the device label. On your smartphone or notebook, find this SSID and enter the wireless key to connect.

Alternatively, scan the QR code on the device label to easily view the SSID and Wireless Key on your mobile device.

Using WPS (Wi-Fi Protected Setup):

Press and hold the WPS button on the PX3321-T1 until the WiFi 5GHz/WPS and 2.4GHz/WPS LEDs light up in amber. Then, press the WPS button on your wireless client device within 2 minutes. If the WPS method fails, you can use the SSID and wireless key to set up the WiFi connection manually.

LED Indicators (WPS):

5GHz/WPS LED: Green On - 5 GHz WLAN enabled; Amber Blinking - WPS process in progress; Blinking - Transmitting/receiving data; Off - 5 GHz WLAN disabled.
2.4GHz/WPS LED: Green On - 2.4 GHz WLAN enabled; Amber Blinking - WPS process in progress; Blinking - Transmitting/receiving data; Off - 2.4 GHz WLAN disabled.

Step 3: Quick Start Setup

Open a web browser on a connected computer and navigate to http://192.168.1.1.

Enter the default User Name: admin and the default login Password, which is found on the device label. Click the "Login" button.

A setup wizard will automatically launch. Follow the on-screen prompts of the wizard to complete the initial configuration, including setting the Time Zone, Internet connection type, and WiFi network details.

Wall Mounting (Optional)

Instructions:

Drill two holes on the wall, spaced 138.8 mm apart. Insert appropriate screw anchors and screws (not provided).
Position the PX3321-T1 so that its wall mount holes align with the installed screws.
Gently slide the PX3321-T1 downwards to secure it firmly in place.

	Zyxel AX/DX/EX/PX Series User's Guide Comprehensive user guide for Zyxel AX/DX/EX/PX series devices, covering setup, configuration, and technical specifications. Learn about wireless settings, network management, and troubleshooting.
	ZyXEL VMG4825-B10A Quick Start Guide: Setup and Configuration A concise guide to setting up your ZyXEL VMG4825-B10A WiFi-N/AC VDSL2 4-port Bonding Combo WAN Gateway, covering hardware connections, internet setup, and wireless configuration.
	Zyxel PMG1005-T20C Quick Start Guide: GPON SFU Setup Get started quickly with your Zyxel PMG1005-T20C GPON SFU. This guide covers hardware connections, configuration, and troubleshooting for your Gigabit Ethernet LAN device.
	Zyxel EX5510-B0 Quick Start Guide: Dual-Band Wireless AX Gigabit Ethernet Gateway Setup Comprehensive quick start guide for the Zyxel EX5510-B0 Dual-Band Wireless AX Gigabit Ethernet Gateway. Learn how to install hardware, connect to Wi-Fi using SSID or WPS, and optionally mount the device.
	Zyxel EX5601 and EX5600 Series Gateway Connectivity Detailed network connectivity diagrams for Zyxel EX5601-T0/T1 and EX5600-T0/T1 series gateways, illustrating WAN access, home/office device connections, and supported services like IPTV, Internet, VoIP, and data.
	Zyxel PX5301-T0 Dual-Band Wireless AX3000 2.5G PON VoIP IAD Quick Start Guide This guide provides instructions for the Zyxel PX5301-T0 Dual-Band Wireless AX3000 2.5G PON VoIP IAD, covering hardware installation, Wi-Fi connection setup using SSID or WPS, and quick start configuration.
	Zyxel WAX610D Quick Start Guide This guide provides instructions for installing and setting up the Zyxel WAX610D AX3000 Dual-Radio Unified Access Point, covering both cloud and standalone management options.
	Zyxel USG LITE 60AX Security Cloud Router: Quick Start Guide & Setup Get started quickly with the Zyxel USG LITE 60AX Security Cloud Router. This guide covers hardware installation, desk placement, and mobile app setup for your high-speed, secure network.