Zyxel PX5301-T0 Dual-Band Wireless AX3000 2.5G PON VoIP IAD

Quick Start Guide

Step 1: Hardware Installation

Package Contents: Device, Power Cable, Ethernet Cable, Quick Start Guide.

Support Information: https://service-provider.zyxel.com/global/en/tech-support

EU Importer: Zyxel Communications A/S, Gladsaxevej 378, 2. th. 2860 Søborg, Denmark

UK Importer: Zyxel Communications UK Ltd., 2 Old Row Court, Rose Street, Wokingham, RG40 1XZ, United Kingdom (UK)

US Importer: Zyxel Communications, Inc, 1130 North Miller Street Anaheim, CA 92806-2001

For configuration assistance and related safety warnings, see the Online Help at https://zxyelslp.com/OPAL-WiFi6.

Safety Warnings: Warning! To avoid possible eye injury, do NOT look into an operating fiber module's connector.

Installation Steps:

Connect the fiber optic cable from your service provider's network to the GPON port. Carefully coil the fiber optic cable from inside to outside. Ensure the cable goes under the tabs to keep it in place. Do not exceed 2.5 meters of fiber optic cable with an outer diameter of 3.0 mm.
Connect the power cable to the Device and press the power button.
Connect a computer to the LAN port using the yellow Ethernet cable.
Connect a phone to the PHONE port using the phone cable.

6 LEDs Indicator Table

LED	Status	Description
Power	Green On	Power on and system ready
	Blinking	Booting
	Off	Power off
GPON	Green On	GPON connection ready
	Blinking	Trying to link up
	Off	Not receiving optical signal normally
	Red On	GPON transceiver power down
	Blinking	GPON transceiver low power alarm
	Off	GPON connection ready
LOS	Green On	WAN connection is up
	Blinking	Transmitting/receiving data
	Off	WAN connection is down/attempted to get an IP address but failed
Internet	Green On	Internet connection is up
	Blinking	Transmitting/receiving data
	Off	Internet connection is down/attempted to get an IP address but failed
LAN1-LAN4	Green On	Ethernet link is up
	Blinking	Transmitting/receiving data
	Off	Ethernet link is down
Phone	Green On	SIP account registered, telephone on-hook and idle
	Blinking	Telephone off-hook or incoming call
	Off	SIP account not registered, telephone on-hook and idle, VoIP is off, or power is off

Step 2: Wi-Fi Connection

Using SSID

The SSID and wireless key are on the Device label.
On your smartphone or notebook, find this SSID. Enter the wireless key to connect.
Scan the QR code on the Device label to see the SSID and Wireless Key on your mobile device.

Using WPS

Press the WPS button until the Wi-Fi 5GHz/WPS and 2.4GHz/WPS LEDs light up in amber.
Press the WPS button on the wireless client. If the WPS method fails, use the SSID and wireless key to set up a Wi-Fi connection.

5GHz/2.4G LEDs Indicator Table

LED	Status	Description
5GHz/WPS	Green On	5 GHz WLAN enabled
	Blinking	Transmitting/receiving data
	Off	WLAN link is down or disabled
	Amber Blinking	WPS process in progress
2.4G	Green On	2.4 GHz WLAN enabled
	Blinking	Transmitting/receiving data
	Off	WLAN link is down or disabled
	Amber Blinking	WPS process in progress

Step 3: Quick Start Setup

Open a web browser and go to http://192.168.1.1.
Enter the default User Name (admin) and login password (on the Device label), and then click Login.
A wizard runs. Follow the wizard prompts to complete the setup.

Wall Mounting (Optional)

Instructions:

Drill two holes on the wall at the distance of 67.0 mm. Insert the screw anchors and screws (not provided).
Place the Device so the wall mount holes line up with the screws. Slide the Device down gently to fix it into place.

Models: PX5301-T0, PX5301-T0 Dual Band Wireles High Speed Fiber Connectivity, PX5301-T0, Dual Band Wireles High Speed Fiber Connectivity, High Speed Fiber Connectivity, Fiber Connectivity, Connectivity

File Info : application/pdf, 2 Pages, 15.90MB

PX5301-T0 Quick start guide 002

References

Adobe PDF library 17.00 Adobe Illustrator(R) 24.0

Related Documents

	Zyxel EX3501-T0 Dual-Band Wireless AX3000 Gigabit Ethernet IAD Quick Start Guide This document provides a quick start guide for setting up the Zyxel EX3501-T0 Dual-Band Wireless AX3000 Gigabit Ethernet IAD, covering hardware connections, WiFi setup via SSID or WPS, and initial configuration through the Quick Start Wizard.
	Zyxel EX5600/EX5601 Series Quick Start Guide: Setup and Connection Concise guide to setting up your Zyxel EX5600 or EX5601 Dual-Band Wireless AX6000 2.5G Ethernet IAD/Gateway. Covers hardware connections, WiFi setup (SSID/WPS), and initial configuration via the Quick Start Wizard.
	Zyxel Fiber Access ONT: Quick Sales Guide for XGS-PON and GPON Devices Explore Zyxel's Fiber Access ONT portfolio, including XGS-PON and GPON models like PE5301-00, PM7500-00, and others. Features, specifications, and contact information for service providers.
	Zyxel WX5600-T0 Quick Start Guide: Dual-Band Wireless AX6000 Gigabit Extender Setup Comprehensive guide to setting up the Zyxel WX5600-T0 Dual-Band Wireless AX6000 Gigabit Extender. Includes instructions for MPro Mesh and non-MPro Mesh network configurations, and LED indicator explanations.
	Zyxel AX/DX/EX/PX Series User's Guide Comprehensive user guide for Zyxel AX/DX/EX/PX series devices, covering setup, configuration, and technical specifications. Learn about wireless settings, network management, and troubleshooting.
	Zyxel EX5510-B0 Quick Start Guide: Dual-Band Wireless AX Gigabit Ethernet Gateway Setup Comprehensive quick start guide for the Zyxel EX5510-B0 Dual-Band Wireless AX Gigabit Ethernet Gateway. Learn how to install hardware, connect to Wi-Fi using SSID or WPS, and optionally mount the device.
	ZYXEL DX5401-Bx / EX5401-Bx Quick Start Guide Concise guide for setting up ZYXEL DX5401-Bx and EX5401-Bx Dual-Band Wireless AX6000 Gigabit IADs, covering hardware connections, Wi-Fi setup via SSID or WPS, and installation.
	Zyxel NR5309 5G NR Indoor Router Quick Start Guide A quick start guide for the Zyxel NR5309 5G NR Indoor Router, detailing hardware installation, network connection setup, device configuration via the Zyxel Air app or web interface, LED indicators, and troubleshooting steps.